456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Leveling or Stock Height? Best Struts for F150 Trucks by Year

best struts for f150: car and trailer parked by a lake

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

When an F-150 starts porpoising on the highway or nosing down hard at every stop sign, the front struts are usually tired. The best struts for F150 trucks are the ones built for your exact generation, drive type and ride height, not whatever fits the largest number of pickups.

This guide covers front struts for the 2009 to 2023 F-150, with picks for stock height, a 2-inch level and a firmer performance feel. If you drive a car or crossover instead, our roundup of shocks and struts for everyday drivers is the better place to start.

Quick answer

What front struts should an F-150 owner buy?

Start with your model year and whether the truck is 2WD or 4WD. A loaded Monroe Quick-Strut or Rough Country N3 brings a worn truck back to factory height, a Gabriel ReadyMount leveling assembly lifts the nose about 2 inches, and Bilstein’s 5100 suits owners who want firmer control.

Our Quick Picks

Three quick picks: a loaded Monroe for a stock-height 2015 to 2020 truck, a Gabriel leveling assembly for 2014 and later 4x4s and a Bilstein 5100 for 2021 to 2023. All six listings are reviewed below.

Monroe Quick-Strut 273031L product photo
Stock height, 2015-2020

Monroe Quick-Strut 273031L

Loaded strut · left front · 2015-2020 F-150

A bolt-in OE-style corner that renews the spring and mount too.

SuitsHigh-mileage trucks kept at factory height
View on Amazon →
Gabriel ReadyMount G57885 product photo
Leveling pick

Gabriel ReadyMount G57885

Loaded leveling strut · 2014-2025 F-150 4WD

Removes the factory rake without spacers or a compressor.

Suits4×4 owners who want a level stance
View on Amazon →
Bilstein B8 5100 24-323758 product photo
Firmer control, 2021+

Bilstein B8 5100 24-323758

Bare strut · front · 2021-2023 F-150

Bilstein's adjustable-height 5100 for the current generation.

SuitsOwners who want control and a mild level
View on Amazon →

How the F-150 Front End Is Built, Year by Year

Since the 2004 redesign, every F-150 has carried a coilover strut at each front wheel, on both rear-drive and 4×4 trucks. The rear axle rides on leaf springs with conventional shocks, so a strut purchase on this truck is always a front job.

  • 2004 to 2008: the first coilover generation, with its own strut part numbers.
  • 2009 to 2014: a revised front end. Many listings treat the 2014 4×4 separately, so read the year range closely.
  • 2015 to 2020: the aluminum-body truck, with separate parts for RWD and 4WD.
  • 2021 and later: the current generation, where some trims carry electronically controlled dampers that most aftermarket struts exclude.

Older trucks are a different story. A 1997 to 2003 4×4 uses torsion bars with plain shocks, and the 1980 to 1996 trucks never had front struts at all; owners of those should read our guide to shocks for the OBS Ford. Raptor models also use their own suspension, so none of the parts below suit them.

Stock Height, Leveled or Firmer: Picking a Strut Type

Decide what you want the truck to do first:

  • Factory ride and height: a loaded replacement assembly with a new spring and top mount.
  • Level the rake: a leveling strut that raises the front roughly 2 inches to match the rear.
  • More control for towing or rough roads: a monotube damper such as a Bilstein or FOX, often with height adjustment.

The second choice is loaded or bare. A loaded strut arrives with spring, mount and damper already assembled and bolts straight in. A bare strut is only the damper, so the factory spring has to be compressed and moved across, which is risky with a truck spring; see our guide to the coil spring compressor styles made for strut jobs before you try it.

Best Struts for F150: Six Front Listings Compared

Each listing names the F-150 years and drive type it covers, and none fits every truck. Enter your year, cab, drive type and trim in Amazon’s fit checker, and replace struts in axle pairs.

1. Monroe Quick-Strut 273031L: Loaded Front Strut and Coil Spring Assembly for 2015-2020 F-150

Monroe Quick-Strut 273031L product photo
Key features
  • Listed for 2015-2020 Ford F-150
  • Strut, coil spring and upper mount preassembled
  • No spring compressor needed
  • Coating tested against salt spray

The Monroe Quick-Strut 273031L is a complete front corner for the 2015 to 2020 F-150, and the L marks it as the driver side. Monroe sells the passenger side as 273031R, so plan on buying both and replacing them as a pair. The listing does not name a drive type in its title, which makes Amazon’s fit checker the place to confirm that this part matches your truck before you order.

Each assembly arrives with the strut, an application-specific coil spring and the upper mount already put together. Monroe says the spring is calibrated to the original design to restore ride height, and that the premium upper mount helps reduce noise, vibration and the memory steer that worn mounts can cause. The steel is coated and salt spray tested, which matters on trucks that spend winters on salted roads.

The main draw is the installation. Because the spring stays compressed inside the assembly, you unbolt the old strut and bolt this one in without a spring compressor. It suits an owner whose truck has sagged or bounces with age and who wants it back to stock. It is not the choice for leveling or for a sportier, firmer ride.

View Monroe Quick-Strut 273031L on Amazon

2. Rough Country N3: Loaded Front Struts, Set of 2, for 2014-2027 F-150 4WD at Stock Height

Rough Country N3 Loaded Struts product photo
Key features
  • Listed for 2014-2027 F-150 4WD
  • Pair of pre-loaded coil struts
  • 1-3/8 inch bore, nitrogen gas charged
  • Hardened chromed piston rod

Rough Country’s N3 loaded struts come as a pair for the 2014 to 2027 F-150 4WD at stock height. Buying both sides in one box takes the guesswork out of matching left and right parts, and the stock-height version keeps the truck at its factory stance. Rough Country sells separate N3 listings for leveled and lifted trucks, plus a 2WD version, so check that the one you open says 4WD stock height.

Each strut is supplied with its coil already installed, so there is no strut disassembly and no spring compressor in the job. The damper is nitrogen gas charged, which the maker says improves ride and handling and reduces shock oil aeration. It uses a 1-3/8 inch bore and a hardened, chromed piston rod for corrosion resistance and better sealing, and Rough Country backs it with a limited lifetime replacement warranty.

The maker describes the ride as smooth and factory-like, so these are meant to replace worn struts, not to transform how the truck handles. They suit a 4×4 owner who wants a straightforward bolt-on refresh across the front axle. If you plan to level or lift the truck, choose one of the taller N3 listings instead.

View Rough Country N3 Loaded Struts on Amazon

gravel road across open land

3. Gabriel ReadyMount G57885: 2-Inch Front Leveling Strut and Spring Assembly for 2014-2025 F-150 4WD

Gabriel ReadyMount G57885 product photo
Key features
  • Listed for 2014-2025 F-150 4WD
  • Raises the front about 2 inches
  • Complete assembly with spring, mount and boot
  • G-Force Technology valving

The Gabriel ReadyMount G57885 is a leveling assembly for the 2014 to 2025 F-150 4WD. It raises the front by about 2 inches so the nose sits level with the rear, removing the factory rake that leaves many pickups looking tail-high. The listing is a 1-pack, so you need two for the front axle, and Gabriel asks buyers to verify year, drivetrain and position notes before ordering.

Each unit combines a Gabriel strut, a pre-loaded coil spring, upper mount, spring seat, boot and bumper in one piece. Because it arrives assembled, no spring compressor is needed, and Gabriel says it can save up to 1.5 hours of installation time compared with rebuilding a strut. The maker states each design is fit and ride tested and uses its G-Force Technology for control, stability and comfort on changing roads.

Leveling adds clearance for slightly larger tires and gives the truck a cleaner stance. The trade is changed front geometry, so an alignment afterward is part of the job, and the ride may feel a touch firmer than stock. It suits owners who want the level look with new springs, not anyone keeping factory height.

View Gabriel ReadyMount G57885 on Amazon

4. Bilstein B8 5100 24-323758: Ride Height Adjustable Front Strut for 2021-2023 F-150

Bilstein B8 5100 24-323758 product photo
Key features
  • Listed for 2021-2023 Ford F-150 front
  • Ride height adjustable design
  • Reuses factory coil spring and mounts
  • Can be aligned to factory specs

The Bilstein B8 5100 24-323758 is a front strut for the 2021 to 2023 F-150, from the ride height adjustable branch of the 5100 line. That design lets you set the front at stock height or raise it to level the truck, all with one part. The listing does not spell out drive type or exclusions in its title, so trucks with electronically controlled dampers or special trims need a careful check in the fit tool.

Bilstein says the strut uses the truck’s factory coil springs and original mounting points for a direct fit, and that the truck can still be aligned to factory specs to avoid uneven tire wear. The maker pitches it on precision handling and vehicle control. Bilstein lists the B8 5100 Ride Height Adjustable range under its limited lifetime warranty for products bought in North America.

This is a bare strut, sold one per box, so the job means compressing your factory spring and moving it, along with the top hat, onto the new body. Have a shop do the transfer if you lack a compressor rated for truck springs. It suits owners who want firmer control and a modest level, not those after a soft, factory ride.

View Bilstein B8 5100 24-323758 on Amazon

icy road through snowy trees

5. FOX 2.0 Performance: Front Coil-Over and Rear Shock Set for 2014-2016 F-150 4WD

FOX 2.0 Performance Set product photo
Key features
  • Listed for 2014-2016 F-150 4WD
  • Factory height to 2 inches of front lift
  • 2-inch aluminum monotube body
  • Rebuildable and nitrogen rechargeable

The FOX 2.0 Performance set pairs two front coil-overs with two rear shocks for the 2014 to 2016 F-150 4WD. It suits trucks at factory height or with up to 2 inches of front lift and up to 1 inch at the rear. Since it covers both axles, it renews the whole truck at once instead of leaving tired rear shocks behind new front struts.

Front ride height is set with an adjustable preload ring, from stock up to the 2-inch limit, though the spanner wrench for that adjustment is not in the box. The dampers are monotube and gas charged, built around a 2-inch seamless aluminum body, and FOX says they can be rebuilt and recharged with nitrogen. Washers, bushings, reservoir clamps and nuts are included, the factory mounting bolts are reused, and mounting plates are sold separately.

That rebuildable design and adjustable height appeal to owners who tow, run gravel roads or want a performance feel. Expect a firmer ride than the factory setup, and plan an alignment after setting the height. The narrow year range is the main catch, so it is not for later trucks.

View FOX 2.0 Performance Set on Amazon

6. Unity 2-11304-001: Front Complete Strut Assembly Kit, Pair, for 2009-2012 F-150 RWD

Unity 2-11304-001 Strut Pair product photo
Key features
  • Listed for 2009-2012 F-150 RWD
  • Front pair, both sides in one kit
  • Mount, bearing plate and spring preassembled
  • Excludes SVT Raptor and lifted trucks

Unity’s 2-11304-001 kit is a front pair of complete strut assemblies for the 2009 to 2012 F-150 in rear-wheel drive. The listing notes it is for RWD models only and excludes the SVT Raptor and trucks with lift kits. Owners of a 4×4 or a later 2013 truck should look for the Unity part that names their exact setup, since the brand splits its listings tightly.

Each assembly comes with a new top mount, bearing plate, bumper, insulators and coil spring already installed. Unity says the kit restores factory ride height and gives a stable, comfortable ride, and that it removes the need for specialty tools. Getting both sides in one box keeps the front end matched and saves ordering two separate parts.

This kit is aimed at owners who want to refresh an older rear-drive truck without paying for a performance damper. Replacing the whole corner also renews the mount and spring, which are often as worn as the strut on a truck this age. It is a stock replacement only, so it will not level the truck or suit off-road use, and an alignment should follow the install.

View Unity 2-11304-001 Strut Pair on Amazon

Matching a Listing to Your Truck

This table narrows the best struts for F150 trucks to a short list; confirm the part number against your VIN before ordering.

Your F-150Listing to checkTypeWatch for
2015 to 2020, worn out, keep stock heightMonroe Quick-Strut 273031LLoadedSold per side; buy the right-hand part too
2014 and later 4WD, stock heightRough Country N3 pairLoadedNot for leveled trucks
2014 to 2025 4WD, remove the rakeGabriel ReadyMount G57885Loaded, 2-inch levelOne per box; alignment after
2021 to 2023, firmer controlBilstein B8 5100 24-323758Bare, height adjustableNeeds a spring transfer
2014 to 2016 4WD, tows or goes off-roadFOX 2.0 Performance setCoilover plus rear shocksSpanner and plates sold separately
2009 to 2012 RWD, budget refreshUnity 2-11304-001 pairLoadedNot for 4×4 or lifted trucks
F-150 front strut listings compared by model years, drive type and strut style
stacked tires in a dark shop

Not every noise up front means the struts are done. A creak or chirp over speed bumps is often a dry sway bar bushing or end link, which our post on why a car squeaks when going over bumps sorts out.

West Michigan Roads and the F-150 Front End

Freeze-thaw potholes in Grand Rapids punish a heavy pickup, and a truck that tows or plows takes each hit with more mass behind it. Over time the seals give up and the front end floats.

The usual signs are a second or third bounce after a dip, nose dive under braking, scalloped front tires and wet oil streaks down the strut body. Gabriel’s ReadyMount page points out that a light, even mist of oil is normal, while streaking is a sign of a leak. Our guide on how to tell if struts are bad walks through each test.

inside a curved metal tube

Road salt also slows the job, because lower strut bolts and top mount nuts rust in place. Soak them with penetrating oil the night before and have fresh nuts ready.

Installing F-150 Struts and Knowing When to Hand It Off

A loaded strut is a fair driveway job with a floor jack and stands. A bare strut is different: a compressed truck spring stores a lot of energy, so without a compressor rated for truck springs, let a shop do the transfer.

Book an alignment afterward, whichever of the best struts for F150 trucks you fit. New struts, and leveling struts most of all, change the front geometry, and a truck left out of spec pulls and wears tire edges. Bilstein covers its B8 5100 range under the limited lifetime terms on its North American warranty page, which is worth reading before you pick a brand.

driver seen from the back seat

If you would rather drop the truck off, our Grand Rapids suspension repair service handles struts, shocks, mounts and the steering parts around them. Hendrick Hoffman, our owner and head mechanic, holds ASE and State of Michigan certification for steering and suspension, and you can read about his background on our about us page.

Frequently Asked Questions

Do leveling struts make an F-150 ride rougher?

They can feel a little firmer than stock, since the spring and valving are set for a taller front. A quality leveling assembly is tuned to keep the ride comfortable, and a fresh alignment keeps the steering straight.

Are the struts on a 2WD and a 4×4 F-150 the same?

Usually not. Many generations use different strut assemblies for RWD and 4WD trucks, so pick a listing that names your drive type and confirm it in the fit checker.

Should I change the rear shocks at the same time?

If they have the same miles on them, yes. Tired rear shocks let the leaf springs bounce the back of the truck, and that gets worse with a trailer or a loaded bed.

Do I need a spring compressor for F-150 struts?

Only for bare struts like the Bilstein 5100, where the factory spring moves onto the new damper. Loaded assemblies come with the spring and mount installed, so they bolt in without one.

Is your F-150 bouncing, diving or clunking through Grand Rapids potholes? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a front suspension check on our contact page.

Short on daytime hours? Bring the truck to 456 Carrier St NE, Grand Rapids, after closing time and use our after-hours drop-off.