As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
One brand is famous for the red calipers on supercars, the other for spark plugs, sensors and a long list of factory parts. Put them side by side on the parts shelf, though, and the brembo vs bosch choice gets a lot more ordinary: both sell quiet ceramic street pads made to replace what the car came with.
To keep the match fair, we compared sets for one vehicle and one axle: the front brakes of the 2017 to 2022 Honda CR-V, one of the most common crossovers on Grand Rapids roads. That gives you Brembo’s P28098N against two Bosch lines, the QuietCast BC2036 and the Bosch Blue BE2036H. Every product detail comes from the Amazon US listings or the makers’ own pages.
Quick answer
Should a CR-V owner buy Brembo or Bosch front pads?
Pick the Brembo P28098N if you want an OE-matched ceramic set with all installation hardware in the box. Pick the Bosch QuietCast BC2036 for its rubber core shims and powder-coated backing plates, or the Bosch Blue BE2036H as a simpler ceramic set with hardware. All three are street pads, not track pads.
Our Quick Picks
One Brembo set and two Bosch sets for the front axle of the 2017-2022 Honda CR-V, each reviewed in full below.

Brembo P28098N
OE-matched Brembo street pad with every clip needed for the job.

Bosch QuietCast BC2036
Bonded rubber core shims and a coated plate for quiet, rust-resistant stops.

Bosch Blue BE2036H
Straightforward Bosch ceramic set with a hardware kit and coated plates.
Racing Name or Parts-Counter Regular?
Brembo built its reputation on high-performance braking systems, and that image sells a lot of aftermarket pads. The P28098N, however, is not a racing compound. Its listing describes a ceramic pad that meets or exceeds the material specs of the original Honda part, with chamfers and slots to cut vibration and a formula aimed at lower wear and less dust.
Bosch comes at the same job from the original-equipment side. It sells two ceramic lines for this CR-V: QuietCast, its premium range with molded rubber core shims, and Bosch Blue, a range it describes as using platform-specific friction formulas. So the real question is less about brand fame and more about which shim design, coating and hardware package suits your car.
If you drive mostly commuter miles and want a broader look at pad types, our guide to the best brake pads for daily driving explains ceramic, semi-metallic and organic compounds in plain terms. For this CR-V, ceramic is what all three sets use, so the comparison stays like for like.
Brembo vs Bosch Brake Pads on Paper
The table lines up what each listing actually claims. Where a listing is silent on a point, we leave it that way rather than guess.
| Point | Brembo P28098N | Bosch QuietCast BC2036 | Bosch Blue BE2036H |
|---|---|---|---|
| Compound | Ceramic | Ceramic | Platform-specific ceramic |
| Noise control | Chamfers and slots | Pre-attached multilayer rubber core shims | OE-style multilayer shim |
| Backing plate | Not described in the listing | Powder-coated against rust | Rust-inhibitive coating |
| Hardware | All installation hardware included | Hardware kit where available, plus lubricant | Hardware kit and lubricant included |
| Vehicle named on listing | None (Honda OE# 45022-TLA-A01) | 2017-23 CR-V, 2017-21 Clarity, 2023-24 HR-V | 2017-25 CR-V, 2017-21 Clarity, 2023-25 HR-V |
The biggest practical gap is the fitment wording. Bosch prints model years in its listings, while Brembo only gives the Honda part number it replaces, and retailers who resell the P28098N disagree on which trims and years it covers. Treat Amazon’s fit checker as the final word for any of the three.
Brembo vs Bosch Front Pads for the CR-V, Set by Set
The Bosch Blue set also appears in our Honda brake pad guide; it is repeated here because it is the second Bosch line made for this exact axle. Before you order, match your year, trim and drivetrain (gas or hybrid) on the listing.
Brembo P28098N: Premium Ceramic Front Pads with Installation Hardware

- Ceramic compound for lower wear and dust
- Chamfers and slots against vibration
- All installation hardware in the box
- Replaces Honda OE# 45022-TLA-A01
The P28098N is Brembo’s premium ceramic front pad set cross-referenced to Honda part number 45022-TLA-A01, the front pad used on the fifth-generation CR-V sold from 2017. The Amazon listing names only that part number and no vehicle, and resellers disagree on which years and trims it covers, so run your exact CR-V through the fit checker before you order. It covers one axle, meaning both front wheels.
Brembo describes the compound as cutting friction wear and dust emission, which keeps wheels cleaner between washes. Chamfered edges and slots in the friction face are there to damp vibration and noise during light stops in traffic. The brand also points out that it develops more than 100 friction materials for different markets and vehicles, and it says this set meets or exceeds the material specs of the original part.
For a home mechanic, the most useful line on the listing is that all the hardware needed for installation is included. That means fresh abutment clips go in with the pads, which matters on a CR-V whose old clips have spent several winters in road salt. This is an everyday street pad with a factory feel, so it does not suit track days or heavy towing.

Bosch QuietCast BC2036: Premium Ceramic Front Pads with Rubber Core Shims

- Pre-attached multilayer rubber core shims
- Powder-coated backing plate against rust
- Slots and chamfers for quiet stops
- Hardware where available plus synthetic lube
QuietCast is the premium tier of Bosch’s pad range, and the BC2036 is the front set its listing ties to the 2017 to 2023 Honda CR-V, along with the 2017 to 2021 Clarity and the 2023 to 2024 HR-V. Bosch notes that trim and engine can still change the fit, so confirm your exact vehicle with the fit checker. The box holds pads for both front wheels.
The feature Bosch leans on is its Molded Shim Technology, a pre-attached multilayer rubber core shim on the back of each pad. Bosch says the rubber-to-steel bond is strong and helps lower noise and resist corrosion. The ceramic friction material is formulated for steady stopping power with quiet, low dust operation, and slots and chamfers on the face help with fit and smooth engagement.
The steel backing plate is powder coated to fight rust, a real advantage when salty slush sits on the brakes for weeks at a time. A hardware kit is included where available, along with synthetic lubricant for the sliding contact points, so check the listing photos to see whether new clips come with your set. It suits commuters who care most about quiet, clean braking, not drivers chasing extra bite.
View Bosch QuietCast BC2036 on Amazon
Bosch Blue BE2036H: Ceramic Front Pads with Hardware Kit for the CR-V

- Platform-specific ceramic friction formula
- OE-style multilayer noise shim
- Rust-inhibitive backing plate coating
- Hardware kit and synthetic lube included
Bosch Blue is the second ceramic line Bosch offers for this axle, and the BE2036H listing names the widest span of the three sets here: the 2017 to 2025 CR-V, the 2017 to 2021 Clarity and the 2023 to 2025 HR-V. As with any pad, trim and engine can affect the fit, so check yours in the fit checker. It was first reviewed in our Honda pad guide.
Rather than a single compound for every car, Bosch says the Blue line uses ceramic formulas matched to each vehicle platform, aimed at good stopping power, less fade and long life. Each pad carries an OE-style multilayer shim on the back to damp noise. Slots and chamfers in the friction material copy the factory design, which helps the pads seat cleanly and stop quietly.
The steel backing plates have a rust-inhibitive coating, and the set ships with a hardware kit and synthetic lubricant for the slide points. That makes it a tidy one-box job if you are doing the front brakes in the driveway. It is a sensible choice for owners of newer CR-Vs or anyone who wants simple, quiet replacement pads rather than a performance upgrade.
View Bosch Blue BE2036H on Amazon

Where the Differences Show Up on a Michigan CR-V
Squeal and vibration
All three sets use slots and chamfers on the friction face, which is the standard way to break up vibration before it turns into noise. Bosch adds a shim bonded to the back of each pad, and on QuietCast it is a multilayer rubber core design that Bosch calls Molded Shim Technology. The Bosch QuietCast product page also has a part number lookup that shows which models a set fits. Brembo relies on the pad shape and its compound for comfort in this listing.
In practice, a lot of brake squeal on older crossovers starts at the clips and slide pins, not the pads. Rusty abutment clips hold a pad at an angle, and a dry pin lets the caliper chatter. Cleaning the bracket and lubricating the contact points matters as much as the brand on the box, whichever set you choose.
Road salt and corrosion

West Michigan winters coat every brake corner in salty slush from November to March. When rust builds between the backing plate and the friction lining, the lining can lift or crack, and a swollen plate can bind in its bracket. Both Bosch sets list a coated backing plate against that kind of corrosion, which is a fair reason to lean their way if your CR-V lives outside.
The Brembo listing does not describe a plate coating, so it neither claims nor rules one out. Where it scores is the hardware: the listing says everything needed for the installation comes in the box. New clips are the cheapest anti-corrosion step you can take on a salt-belt car, so a complete kit has real value.
Dust, wear and replacement point
Ceramic pads of all three types generally leave a lighter, less sticky dust than semi-metallic pads, which helps alloy wheels stay clean through a wet spring. How long any set lasts depends far more on your commute, your braking habits and the condition of the rotors than on the logo. Our article on how long brake pads last covers the usual mileage ranges and what shortens them.
Brembo’s own page on its ceramic car pads says pads should be inspected regularly and replaced once the friction material is down to about 3 millimeters, roughly 1/8 inch. That is a sensible yardstick for any brand. On a CR-V you can often see the outer pad through the wheel spokes with a flashlight.
Which Set Fits Your Driving
Start with how and where the car is kept, then decide how much you care about noise and hardware.
| Your situation | Better fit | Why |
|---|---|---|
| Car parked outside all winter on salted streets | Bosch QuietCast BC2036 | Powder-coated plate and bonded rubber core shims |
| You want every clip and spring in one box | Brembo P28098N | Listing says all installation hardware is included |
| Plain, quiet replacement with hardware and lube | Bosch Blue BE2036H | Simpler shim design, hardware kit in the box |
| You plan to fit Brembo rotors as well | Brembo P28098N | Keeps the pad and disc from one maker |
| 2023 or newer CR-V | Bosch Blue BE2036H | Listing names CR-V model years through 2025 |
If the rotors are scored, warped or below their minimum thickness, new pads will not fix a pulsing pedal. Our roundup of brake rotors for Honda models lists discs that pair with ceramic pads, and fresh pads on fresh rotors bed in more evenly.

Want to see how either brand does against a different rival? Our Brembo vs PowerStop comparison looks at towing-rated pads for a larger SUV, and the Wagner vs Bosch front pad match-up pits a Bosch set against Wagner on a compact crossover.
When New Pads Will Not Solve It
Pads are a wear item, but some brake complaints point somewhere else. A grinding noise means metal is touching metal, and a pull to one side often comes from a sticking caliper or a seized slide pin. A soft or sinking pedal is a hydraulic issue that no pad brand can cure.

Many European cars use an electric wear sensor that lights a warning on the dash, and our Audi brake pad warning light article explains how that works. Most CR-V front pads instead use a small metal tab that squeals when the lining gets thin. If you hear it, or any of the symptoms above, our brake repair service in Grand Rapids can measure the pads and rotors and check the calipers and fluid before anything is replaced.
More Buying Guides
Frequently Asked Questions
Is Brembo better than Bosch for a daily driver?
Not automatically. Brembo’s racing fame comes from its performance brake systems, while the P28098N is an OE-style ceramic street pad, just like the two Bosch sets. For a daily driven CR-V, the shim design, backing plate coating and hardware matter more than the name.
What is the difference between Bosch QuietCast and Bosch Blue?
QuietCast is Bosch’s premium line, with pre-attached multilayer rubber core shims and a powder-coated backing plate. Bosch Blue uses platform-specific ceramic formulas, an OE-style multilayer shim and a rust-inhibitive coating, and its listing includes a hardware kit.
Do these pads fit the CR-V Hybrid?
Do not assume so. The Bosch listings warn that trim level and engine can affect fitment, and the Brembo listing names only a Honda part number. Enter your exact year, trim and drivetrain in Amazon’s fit checker before you order.
Should I replace the rotors with the pads?
Only if they need it. Measure the rotors against the minimum thickness cast into them and look for deep scoring, heavy rust or a pulsing pedal. Rotors in good shape can stay, but a fresh pad set beds in more evenly on a clean, true surface.
Rather have a technician fit the pads and look over the rest of the brake system? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a brake appointment through our contact page.
Can your CR-V only come in after hours? Pull in at 456 Carrier St NE, Grand Rapids, use the after-hours drop-off and tell us in your note which wheel the noise seems to come from.
