As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Set a Mobil 1 filter beside a WIX XP filter for the same Ford, and they look almost identical from the outside. The mobil 1 vs wix choice is about what sits inside the can and how long each maker says it can stay on the engine. Both brands aim these filters at owners who run full synthetic oil, so the gap between them is narrower than the price tags suggest.
We compare them on one common part so the numbers line up: the Motorcraft FL-500S, sold by Ford under service number AA5Z-6714-A. It is the spin-on can on many Ford and Lincoln gas engines from around 2009 on, including the 3.5-liter EcoBoost in the F-150. Parts catalogs cross it to the WIX 57502XP and the Mobil 1 M1-212A, but always confirm your year, model and engine on the Amazon listing before you order.
Quick answer
Should your Ford get a Mobil 1 or a WIX XP filter?
Pick Mobil 1 M1-212A if you run long synthetic intervals and want the higher mileage claim on the box. Pick WIX XP 57502XP for synthetic oil changed up to 20,000 miles apart, with a stated micron rating. Pick the Ford AA5Z-6714-A when you follow the oil-life monitor and want the factory part.
Our Quick Picks
For the Mobil 1 vs WIX question on the Ford FL-500S spin-on, here are the two compared filters plus the related third pick, the factory Ford AA5Z-6714-A that both brands replace.

Mobil 1 M1-212A
Mobil 1's long-drain can in the FL-500S size.

WIX XP 57502XP
WIX's synthetic-oil line in the FL-500S size.

Ford AA5Z-6714-A
The Ford filter the other two are built to replace.
What the Boxes Promise: Media, Pressure and Mileage
Both premium lines use a blend of synthetic and natural fibers rather than plain cellulose paper. Synthetic fibers are thinner and more uniform, so a pleat can catch fine grit while still letting cold oil through. That is the main reason either filter costs more than a basic can.
WIX keeps its full lineup and part lookup on the WIX Filters website, which is handy for confirming the 57502XP number. Where the two brands part ways is in what they choose to publish. WIX prints a specific efficiency figure and a mileage ceiling on its XP listings. Mobil 1 leads with mileage and strength: its Extended Performance listings advertise up to 25,000 miles of protection and a can built to take about nine times normal oil system pressure.
| Claim | Mobil 1 M1-212A | WIX XP 57502XP | Ford AA5Z-6714-A |
|---|---|---|---|
| Media | Synthetic blend | Synthetic-blended, natural fibers, no wire backing | Not stated on listing |
| Efficiency figure | “Removes more contaminants than conventional filters” | 99% at 23 microns (based on 51515XP) | Not stated on listing |
| Mileage on the box | Up to 25,000 miles | Up to 20,000-mile change intervals | Follow Ford’s schedule |
| Can strength | Up to 9x normal operating pressure | Not stated on listing | Not stated on listing |
Treat that table as a summary of marketing claims, not a lab shootout. WIX bases its micron figure on a different filter number and applies it to the whole XP family, and Mobil 1 does not quote a micron rating on this listing at all. Because the two makers measure different things, a reader cannot line the figures up and declare a winner.
Get the Part Number Right Before the Brand
A premium filter on the wrong engine is worse than a basic one on the right engine. Spin-on cans that look alike can differ in thread pitch, gasket diameter, bypass valve setting and height. The Ford number on the old filter, or in your owner’s manual, is the only safe starting point.
For this fitment, the WIX listing names Ford, Lincoln, Mercury and Mazda models from 2009 to 2015, and its part finder covers later years. The Mobil 1 listing does not name vehicles in its title, so the M1-212A match here comes from aftermarket cross-reference catalogs that pair it with WIX 57502. Enter your vehicle in the Amazon part finder for each filter and make sure all three agree before you buy.
Ford’s EcoBoost family is a good example of why this matters. The 3.5-liter takes this spin-on can, while the 2.7 and 3.0 use a cartridge and many small four-cylinders use a smaller can. Our guide to oil filters for EcoBoost engines sorts out which number goes where.
Mobil 1 vs WIX: Three FL-500S Filters Up Close
Each filter below is the version listed for the FL-500S spin-on application. Two of them, the WIX XP and the Ford part, also appear in our EcoBoost filter roundup, so you may recognize them. Check the part finder on every listing with your own vehicle first.
Mobil 1 M1-212A Extended Performance: Synthetic Blend Spin-On Oil Filter with 25,000-Mile Claim

- Synthetic blend media with synthetic fibers
- Up to 25,000 miles of protection, per the listing
- Can rated for up to 9x normal operating pressure
- Single filter, cross-referenced to WIX 57502
The M1-212A belongs to Mobil 1’s Extended Performance line, the filters Mobil pairs with long-drain synthetic oil. This listing is a single spin-on can, and parts catalogs cross the M1-212A to the WIX 57502 family, which in turn replaces the Motorcraft FL-500S. Because the Mobil 1 title does not list vehicles, use the Amazon part finder to confirm your Ford or Lincoln before you order.
Inside, the element uses a synthetic blend media. Mobil 1 says the synthetic fibers help keep oil clean, remove more contaminants than conventional filters and lower resistance to oil flow at the same time. The listing title advertises up to 25,000 miles of protection, and the can is built to withstand up to nine times normal oil system operating pressure, a measure of how sturdy the shell is.
This filter makes the most sense for an owner who runs a full synthetic out to the long end of Ford’s oil-life monitor and puts on steady highway miles. If you change oil every few thousand miles, most of that rated life goes unused. The 25,000-mile figure is an upper limit, so keep following the interval your oil and your owner’s manual set.
View Mobil 1 M1-212A on Amazon

WIX XP 57502XP: Synthetic-Blend Spin-On Oil Filter Rated 99% at 23 Microns

- Synthetic-blended media with natural fibers, no wire backing
- 99% efficient at 23 microns (based on 51515XP)
- Up to 20,000-mile change intervals, per WIX
- Listed for Ford, Lincoln, Mercury and Mazda (09-15)
WIX XP is the brand’s line built for synthetic oil and harder driving, and the 57502XP is its version of the Motorcraft FL-500S spin-on. The listing names Ford, Lincoln, Mercury and Mazda models from 2009 to 2015 and asks you to check later years in the part finder. This exact listing already appears in our EcoBoost oil filter guide, and here it is set directly against Mobil 1.
The element is a synthetic-blended media mixed with natural fibers, stiff enough that it needs no wire backing behind the pleats. WIX rates the XP family at 99 percent efficiency at 23 microns, a figure it bases on its 51515XP filter rather than this exact number. It also says the XP line supports change intervals of up to 20,000 miles and handles towing, stop-and-go traffic and long highway runs.
This is a sensible match for an F-150 owner who tows a camper, idles at job sites or simply runs synthetic oil on the longer schedule in the manual. It gives you a stated efficiency number, which Mobil 1 does not print for this can. If you change conventional oil often, a standard WIX or the Ford part covers the job just as well.
Genuine Ford AA5Z-6714-A: Factory Spin-On Oil Filter, the FL-500S Service Part

- Genuine Ford service part AA5Z-6714-A
- The Motorcraft FL-500S fitment both brands cross to
- Spin-on can, single filter
- Pairs with Ford's oil-life monitor schedule
AA5Z-6714-A is Ford’s own service number for the spin-on filter sold under the Motorcraft brand as the FL-500S. It is the part the Mobil 1 M1-212A and the WIX 57502XP are cross-referenced to, which makes it the natural yardstick in this comparison. This same listing is covered in our guide to EcoBoost oil filters, where it sits alongside other Ford fitments.
The listing is short and gives the part number and its OEM equivalent rather than media or efficiency claims, so this review does not invent any. What you get is the filter Ford specifies for the engines that use this number, and the one Ford’s own maintenance schedule is written around. It threads on like any other spin-on can and uses the same oiled gasket and hand-tight install.
Choose it if your truck or SUV is still under factory warranty and you like service records that show Ford parts, or if you simply change oil when the monitor says so. It is not designed around the very long intervals that the Mobil 1 and WIX XP boxes advertise. As with the others, confirm your year, model and engine on the listing first.
View Ford AA5Z-6714-A on Amazon

Which Can Suits the Way You Change Oil
A filter only needs to outlast the oil it runs with. If your truck gets fresh oil every 5,000 miles, a can rated for 20,000 or 25,000 miles will spend most of its life with plenty of capacity to spare. The extra media pays off when you run a full synthetic out to the long end of what Ford’s oil-life monitor allows, or when you tow and the oil works harder between changes.
| How you drive and service | Closer fit | Reason |
|---|---|---|
| Oil-life monitor, still under warranty | Ford AA5Z-6714-A | Factory part, simple service records |
| Full synthetic, longer intervals, towing | WIX XP 57502XP | Published micron figure, rated to 20,000 miles |
| Extended-drain synthetic, highway miles | Mobil 1 M1-212A | Highest mileage claim, heavy-duty can |
| Short trips, frequent changes | Any of the three | Oil wears out before the filter does |
Pairing matters as much as the filter. Our comparison of full synthetic motor oils covers the oils most owners run with these cans. The US government’s fuel economy maintenance tips also point out that using the oil grade your manufacturer recommends helps mileage, so match the viscosity in your manual first.

A long mileage claim never overrides your owner’s manual. Ford’s severe service conditions, such as towing, long idling and dusty roads, call for shorter changes no matter what the filter box says. If an interval ever slips past due, our article on how long you can go without an oil change explains what tired oil does inside an engine.
Engines that burn some oil between changes need the dipstick checked often, whichever brand of filter they wear. Turbo engines are a common example, and our write-up on Audi 2.0T oil consumption shows how to judge whether the amount is normal.
Road Salt, Slush and Short Hops: Filters in a Grand Rapids Winter
Winter driving in Grand Rapids is rough on oil in ways no filter label covers. A five-minute trip to the store in January never lets the engine reach full temperature, so condensation and a little unburned fuel build up in the crankcase. Most owner’s manuals count that pattern as severe service, and in that case the oil is usually ready to come out well before any of these filters is full.
On a frozen morning, thick oil can briefly push past the filter’s bypass valve until it thins out, which is how the design protects the engine from oil starvation. The anti-drainback valve also matters, since it keeps oil in the filter overnight so the engine gets pressure sooner at startup. Choosing the right winter viscosity still does more for a cold start than the filter brand, and our guide to motor oil for cold weather explains how to read the W number.

Salt and slush are mostly a problem for the outside of the filter. A can that hangs low near the front of the engine collects road spray, and a rusty shell can make removal harder at the next service. Wiping the old filter area clean and checking for weeping at the gasket after a few days of driving is a good habit through the salt season.
Doing the Swap at Home, or Handing Over the Keys
On most engines that use this can, the change is simple: drain the oil, spin off the old filter, and make sure its gasket came off with it. Smear clean oil on the new gasket, thread the filter on by hand until it touches, then tighten it the amount printed on the can or in your service information. A filter wrench helps with removal, and our roundup of oil filter wrenches for Ford owners covers the styles that fit.
A double gasket is the classic mistake. If the old seal sticks to the engine and a new filter goes on over it, oil can blow out within minutes of starting. Run the engine briefly after the change, look underneath for drips, and recheck the level once the oil settles.

Some symptoms point past the filter. An oil pressure light, a new ticking at startup, or oil that turns dark and thin very quickly all deserve a closer look. Our team handles oil changes in Creston for foreign and domestic vehicles, and Hendrick Hoffman, our owner and head mechanic, holds ASE and State of Michigan certification in engine repair.
More Buying Guides
Frequently Asked Questions
Is a Mobil 1 oil filter better than WIX XP?
Neither is clearly better on paper, because the makers publish different figures. Mobil 1 claims up to 25,000 miles and a can built for nine times normal pressure. WIX XP claims 99 percent efficiency at 23 microns and up to 20,000 miles. On normal intervals, both are more filter than most engines need.
Which Mobil 1 and WIX filters replace the Motorcraft FL-500S?
Parts catalogs cross the FL-500S, Ford AA5Z-6714-A, to WIX 57502 and 57502XP and to Mobil 1 M1-212A. Engines and years vary, so enter your vehicle in the part finder on each Amazon listing to confirm the fit before ordering.
Can I really leave a Mobil 1 filter on for 25,000 miles?
Only if your oil and your owner’s manual allow an interval that long, and most do not. The filter claim is a ceiling. Change the filter with every oil change on the schedule Ford gives for your driving, including the severe service schedule if you tow or make short trips.
Will a WIX or Mobil 1 filter affect my Ford warranty?
Using a correctly fitting aftermarket filter does not by itself void a new vehicle warranty under federal law. Keep receipts showing the part number and the date and mileage of each change, since records are what matter if an engine claim ever comes up.
Still not sure which can belongs on your engine? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or request an oil change appointment on our contact page.
If your hours don’t line up with ours, bring the vehicle by after closing and use our after-hours drop-off at 456 Carrier St NE in Creston.
