As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm a code reader works with your vehicle before you order.
Topdon vs Foxwell is a question that usually starts with a lit check engine light and a modest budget. Both brands sell scanners that cost far less than shop tablets, and both put their names on a long list of look-alike handhelds. Choosing gets easier once you compare the same kind of tool from each side.
So we matched three entry code readers in one class, the cheapest Topdon and Foxwell picks plus a second Topdon: corded, screen-based, engine and emissions only, no app and no subscription. The facts below come from each Amazon listing and the makers’ own sites, and where a detail was missing from both, we say so rather than guess.
Quick answer
Which entry code reader should you buy, Topdon or Foxwell?
Get the Topdon ArtiLink500 for a plain engine reader that graphs live data and runs O2 sensor and EVAP tests. Get the Foxwell NT301 Plus to add a 12V battery and charging check. The Topdon AL400 adds on-screen code lookup. None of the three reads ABS or airbag codes or needs a subscription.
Our Quick Picks
One entry code reader from each brand plus Topdon’s mid-range AL400, all corded handhelds for engine and emissions codes. Each one is reviewed in full below.

Topdon ArtiLink500
ArtiLink reader built around engine tests and data graphs.

FOXWELL NT301 Plus
NT301 code reader with a built-in battery and charging check.

Topdon AL400
Mid-range ArtiLink reader that explains each code on screen.
Where Each Brand’s Lineup Starts
Topdon spreads well beyond scanners. Its US store lists diagnostic tools next to battery testers, chargers, jump starters, thermal cameras, TPMS tools, ADAS targets and J2534 pass-thru gear. Inside diagnostics, the ArtiLink name covers corded code readers, ArtiDiag covers handheld all-system scanners, and the Phoenix and ONE lines are the tablets.
Foxwell stays closer to diagnostics. Its US site sorts products into code readers, professional scanners such as the NT530 and NT680 families, i-series tablets, battery analyzers, TPMS tools and heavy duty equipment. The Foxwell NT301 page sits in that first group and describes the base model as a CAN code reader with a 2.8-inch color screen and hot keys for I/M readiness and code reading.
Both brands climb from these readers to bidirectional tools that run active tests and service resets. If you already know you want that higher tier, our OBD2 scanner guide for home mechanics covers it. This page stays at the bottom rung, where most first-time buyers start.
Topdon vs Foxwell Specs at a Glance
| Spec | Topdon ArtiLink500 | Foxwell NT301 Plus | Topdon AL400 |
|---|---|---|---|
| Systems read | Engine and emissions (generic OBD2) | Engine and emissions; no ABS, SRS or transmission | Engine and emissions, generic and maker-specific codes |
| OBD2 coverage stated | US 1996+, EU 2000+, Asia 2008+ | US 1996+, EU 2001+, Asia 2005+ | US 1996+, EU 2000+, Asia 2008+ |
| Test functions | 10+ OBD2 functions: I/M readiness, graphed data, freeze frame, O2 sensor, on-board control and EVAP tests | Codes with definitions, live data, I/M readiness, EVAP check, recording and playback | Built-in DTC lookup, graphed data, freeze frame, O2 sensor and EVAP tests, one-touch I/M |
| Electrical check | Not listed | 12V battery health, charge level, cranking and charging tests | Not listed |
| Screen | Size not stated in the listing | 2.8-inch color display | 2.4-inch backlit color TFT |
| Updates | Free, via a computer and Topdon’s website | Through a Windows PC only | Free, by connecting to a computer |
| Languages | 7, including English and Spanish | Not stated in the listing | 7, including French and Japanese |
Only the AL400 listing names a warranty, at 24 months, so ask the seller about the other two before you rely on one. Coverage also varies by vehicle and by the protocol your car uses, so check your make and year with the maker or the seller before you order.
Topdon vs Foxwell: The Three Code Readers in Detail
Here is what each reader does, where it stops and the driver it suits.
Topdon ArtiLink500: OBD2 Code Reader with 10 Modes and Data Graphing

- Reads and clears engine codes on OBD2 and CAN vehicles
- Graphed live data, freeze frame and one-key I/M readiness
- O2 sensor, on-board control and EVAP tests
- Free updates via computer, menus in 7 languages
The ArtiLink500 belongs to Topdon’s ArtiLink family, the corded code readers that sit below its ArtiDiag handhelds and Phoenix tablets. Topdon describes it as a tool with more than ten OBD2 functions for vehicles that use the OBD, EOBD and CAN protocols, which covers the generic engine and emissions side of a car rather than its other modules.
The listing names the functions people reach for most: reading and clearing trouble codes, a one-key I/M readiness check, graphed live data, a still frame of data at the moment of a fault, an O2 sensor test, an on-board control test, an EVAP test and vehicle information. The graphing is the practical draw, because a dropping sensor line shows a fault that is easy to miss in plain numbers. Menus and code definitions come in seven languages, including English, Spanish and French.
Updates are free and run by connecting the reader to a computer and installing them from Topdon’s website, and Topdon lists a 24/7 support line. Coverage is stated as most US vehicles from 1996, European cars from 2000 and Asian cars from 2008. It suits a driver who wants a simple engine reader with good data views. It does not read ABS, airbag or transmission codes, and the listing mentions no battery test.
View Topdon ArtiLink500 on Amazon

FOXWELL NT301 Plus: 2-in-1 Code Reader and 12V Battery Tester

- Reads and clears engine codes with on-screen definitions
- 12V battery health, charge, cranking and charging tests
- Live data with recording, playback and PC printing
- 2.8-inch color screen, I/M readiness and EVAP check
The NT301 Plus is Foxwell’s upgrade of its long-running NT301 code reader. It keeps the same engine code functions and adds a 12V battery check, all through the standard OBD2 cable. Foxwell also moved to a 2.8-inch color display, which it says is larger than the 2.4-inch screen on the earlier version.
On the engine side it reads and clears codes with plain definitions, shows live data such as RPM, coolant temperature and fuel trim, and records data for playback or printing through a PC. A readiness test and an EVAP check help before an emissions inspection or a used-car purchase. The battery function reports state of health, state of charge, cranking and charging for flooded, AGM, EFB and gel 12V batteries, with the battery connected through the diagnostic cable.
Foxwell is direct about the limits. The listing says it does not read ABS, SRS or transmission codes, does no oil or service resets and does not perform a load test, and its updates run on a Windows PC only. Coverage is stated as US vehicles from 1996, European models from 2001 and Asian cars from 2005, with exceptions such as Fiat, Alfa Romeo and Lancia. It suits drivers who want codes and a quick battery check from one tool.
View FOXWELL NT301 Plus on Amazon
Topdon AL400: OBD2 Code Reader with 2.4-Inch Screen and DTC Lookup

- Generic and maker-specific engine codes with built-in lookup
- Graphed live data, freeze frame, O2 sensor and EVAP tests
- 2.4-inch backlit color screen and one-touch I/M key
- Free updates by computer, 24-month warranty stated
Topdon calls the AL400 the mid-range model in its ArtiLink code reader line, and it stays in the same corded, engine-only class as the other two picks here. Its draw is a built-in code lookup that puts a short meaning for each fault on the screen, plus support for manufacturer-specific codes such as P1 and U1 on top of the generic P0, P2 and U0 groups.
The test list mirrors what Topdon gives the ArtiLink500: freeze frame, graphed live data, an O2 sensor test, the EVAP test listed as mode 8, a one-touch I/M readiness key and vehicle information. This listing does name the display, a 2.4-inch backlit color TFT screen meant to stay readable in a dim garage. It supports the J1850 PWM, J1850 VPW, ISO9141, KWP2000 and CAN protocols, with menus in seven languages.
Coverage is stated as most US cars from 1996, European cars after 2000 and Asian cars after 2008, and Topdon asks buyers to send a VIN to confirm fit. Updates are free through a computer, and this is the only listing of the three that names a warranty, at 24 months. There is no battery test and no ABS or airbag access. Our code reader guide for all cars also covers the AL400 under a different Amazon listing.

Where the Readers Differ
Data views and engine tests
On engine work, the Topdon listing spells out more. It names graphed live data, a still frame, an O2 sensor test, an on-board control test and an EVAP test along with the usual read and clear. Graphs matter when a sensor drops out for a second, because a moving line shows a glitch that a column of numbers can hide. The AL400 listing names the same graphing and tests and adds a built-in DTC lookup.
The Foxwell lists live data such as RPM, coolant temperature and fuel trim, and it adds recording, playback and printed reports through a PC. That makes it easy to capture a drive and look at it later at the kitchen table. Our guide to bad oxygen sensor symptoms shows which of those readings are worth watching.
Battery and charging checks
This is where the Topdon vs Foxwell choice really splits. The NT301 Plus checks a 12V lead-acid battery through the OBD2 cable, reporting state of health, state of charge, cranking and charging. Foxwell names flooded, AGM, EFB and gel batteries, and it also says plainly that this is not a load test.

The ArtiLink500 listing does not mention any battery function, so plan on a separate tester if you want one. A weak reading on a cold morning is a clue, not a verdict, since cables, a parasitic draw or the starter can look the same. If your battery keeps going flat while parked, read our post on a car battery that dies overnight before you buy a new one.
Updates and support
None of the three listings charges for updates. Topdon says you connect the ArtiLink500 or the AL400 to a computer and install updates from its website, and it points owners to a 24/7 support line. Foxwell is clearer about limits: NT301 Plus updates run on Windows only, not on a Mac or a phone.
For a code reader that only handles generic engine codes, updates matter less than they do on a full scanner. Still, if the only computer at home is a Mac, that one line in the Foxwell listing could decide it for you.

Vehicle coverage
All three readers cover US vehicles from 1996 on, and the AL400 matches the ArtiLink500 on imports. For imports, the listings draw the line in different places: Topdon states European cars from 2000 and Asian cars from 2008, while Foxwell states European models from 2001 and Asian cars from 2005. If you own an older Asian import, that gap is worth checking. Foxwell also lists a few brands it does not fit, including Fiat, Alfa Romeo and Lancia.
Foxwell or Topdon: Matching the Tool to the Driver
In the end, the Topdon vs Foxwell call depends more on what you want to check than on the logo. Use this table to narrow it down, then go back to the reviews above for the details.
| Your situation | Pick | Why |
|---|---|---|
| You want to watch sensor data as a graph | Topdon ArtiLink500 | Graphed data and an O2 sensor test are listed |
| Slow starts and weak batteries are your main worry | Foxwell NT301 Plus | 12V health, cranking and charging tests |
| Your only computer is a Mac | Topdon ArtiLink500 | Foxwell updates are Windows only |
| You check used cars before buying | Foxwell NT301 Plus | Stored codes, readiness and battery in one plug-in |
| You want each fault code explained on the screen | Topdon AL400 | Built-in DTC lookup on a 2.4-inch color screen |
| You need ABS, airbag or transmission codes | None of the three | Step up to a four-system scanner |
The used-car case is a real one around here. A seller can clear codes before you arrive, but readiness monitors that show “not ready” hint that the memory was wiped recently. Pair any of these readers with our used car buying checklist before you hand over cash.
Winter is the other local angle. A West Michigan January is hard on batteries, and a tool that reports cranking voltage helps you spot a fading battery before it strands you in a parking lot. If you drive a European car, keep our list of common Audi fault codes and their causes handy for the codes these readers turn up.

What a Stored Code Can and Can’t Tell You
Every reader on this page talks to the same system. The California Air Resources Board’s OBD II fact sheet notes that 1996 and newer gasoline cars and trucks must have OBD II, as must 1997 and newer diesels. It also explains that the computer stores fault details so a technician can find the problem.
That stored detail points to a circuit or a condition, not a part number. A misfire code can trace back to a coil, a plug, an injector or a vacuum leak, and a reader alone won’t separate them. When the light is steady and the car feels normal, our guide to a check engine light that’s on while the car runs fine helps you judge how urgent it is.
If the same code returns after every clear, or the light starts flashing, it is time for more than a code reader. Our check engine light diagnostic service in Grand Rapids tests the circuit behind the code, so the repair targets the actual fault.
More Buying Guides
Frequently Asked Questions
Is Topdon or Foxwell easier for a first-time user?
At this tier, both are plug-in readers with a handful of buttons and a one-key readiness check. The choice comes down to features: the ArtiLink500 lists graphed data and more engine tests, while the NT301 Plus adds a 12V battery and charging check.
Do I have to pay for software updates?
None of the three listings mentions a fee. Topdon updates the ArtiLink500 and AL400 through a computer and its website, and Foxwell updates the NT301 Plus through a Windows PC only.
Will any of these readers show ABS or airbag codes?
No. All three stay with engine and emissions codes, and Foxwell states that the NT301 Plus does not support ABS, SRS, transmission or service resets. For those systems, look at a four-system or all-system scanner from either brand.
Can the Foxwell battery test replace a load tester?
Not fully. Foxwell says the NT301 Plus does not perform a load test, so it gives a useful health and cranking snapshot rather than a full load result. If a battery tests borderline, have it load tested before you replace it.
Got a code and no idea where to go next? Phone 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a diagnostic appointment on our contact page.
Can’t get away during the workday? Our after-hours drop-off at 456 Carrier St NE lets you leave the car in Creston on your way home.
