As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Picking the best cabin air filter for Mazda CX30 models is simpler than the long Amazon results suggest. Every CX-30 sold in the US so far takes the same filter size, so the real choice is the media inside the frame.
This guide covers the part numbers to look for, what HEPA-grade and carbon layers actually change, and six filters listed for the CX-30. If you drive something else as well, our wider roundup of the best cabin air filter picks for most cars covers other makes.
Quick answer
Which cabin air filter fits a Mazda CX-30?
Look for a filter that replaces Mazda part BDGF-61-J6X (earlier BDTS-61-J6X), the FRAM CF12773 size. For pollen and fine dust, the PUREFLOW PC99818HX HEPA is a strong choice. For odors, the Febreze RZ18130H adds charcoal and baking soda. The ECOGARD XC11801 suits a plain, on-schedule swap.
Our Quick Picks
Three quick picks for the CX-30's one filter size: fine particles, a plain everyday swap and odor control. All six filters are reviewed below.

PUREFLOW PC99818HX HEPA
Dense HEPA-grade media with a charcoal layer behind it.

ECOGARD XC11801
A straightforward pleated filter for dust, pollen and dander.

Febreze RZ18130H HEPA
Charcoal and baking soda absorb odors without adding a fragrance.
One Filter Size Covers Every CX-30 Year
Mazda launched the CX-30 for the 2020 model year on the same platform as the 2019 and later Mazda3. The two share a cabin filter, and so does the CX-50, which is why most listings name all three.
- Mazda numbers: BDGF-61-J6X is the current part, and it supersedes BDTS-61-J6X. Some listings also cite MP111BDGF.
- Aftermarket size: FRAM calls it CF12773, and most other brands cross-reference that number.
- Engines: listings cover the 2.0L and 2.5L engines, but a few stop at 2024 or 2025 for certain engines.
- Not the CX-5 part: the 2013-2025 CX-5 and the 2014-2018 Mazda3 use KD45-61-J6X (CF11811), a different size.
That last point trips people up, because the numbers look alike. Read the number on your old filter’s frame, or enter your year and engine in Amazon’s fit tool, before you order anything.
HEPA-Grade, Carbon or Plain Media?
A plain pleated filter stops dust, pollen and road grit before they reach the blower fan. That covers most commuters. Carbon, charcoal and baking soda layers go after smells such as exhaust, fast-food lines and pets, but they can’t fix a musty odor that comes from the evaporator itself.
HEPA-grade media is denser and aimed at particles well under a micron, which helps allergy sufferers. One maker notes that this density can slightly restrict airflow, so a loaded HEPA filter may need replacing sooner. For the interval Mazda sets for your car, check the maintenance schedule in the manuals section of Mazda USA’s owner resources.
Best Cabin Air Filter for Mazda CX30: Six Filters Reviewed
Each pick below lists the CX-30 by year on its Amazon page. Fit ranges differ slightly between brands, so check your year, model and engine on the listing before you buy.
1. PUREFLOW PC99818HX: HEPA-Grade Cabin Filter with Activated Charcoal for 2020-2026 CX-30

- Listed for 2020-2026 CX-30 2.5L and 2020-2024 CX-30 2.0L
- HEPA-grade media aimed at particles down to 0.3 microns
- High-grade activated charcoal layer for traffic smells
- Also listed for the Mazda3, 3 Sport and CX-50
The PUREFLOW PC99818HX is a HEPA-grade replacement built for the housing the CX-30 shares with the newer Mazda3. Its listing names the 2020-2026 CX-30 with the 2.5L engine and the 2020-2024 CX-30 with the 2.0L, along with the 2019-2026 Mazda3 and 3 Sport 2.5L, the 2019-2024 Mazda3 2.0L and the CX-50. That covers almost every CX-30 on the road, though you should still confirm your engine on the listing.
PUREFLOW says the media is designed to capture very fine airborne particles down to 0.3 microns. That is the size range where pollen fragments, fine dust and smoke particles sit, so the filter makes the most sense for drivers with allergies or anyone who commutes behind heavy traffic. A high-grade activated charcoal layer sits alongside the particle media to deal with exhaust and other outdoor smells.
The maker is upfront that this dense media may cause a minor restriction to airflow. In practice that means a loaded PC99818HX can start to feel weaker at the vents sooner than a plain filter, so it pays to replace it on schedule rather than stretching it. If you mainly want maximum airflow for defrosting, a standard particulate filter may suit you better.
View PUREFLOW PC99818HX HEPA on Amazon
2. ECOGARD XC11801: Premium Particulate Cabin Air Filter for 2020-2026 Mazda CX-30

- Listed for 2020-2026 CX-30 2.5L and 2020-2024 CX-30 2.0L
- Filters up to 99.5% of dust, pollen and pet dander
- Particle media with no carbon layer listed
- Replaces Luber-finer CAF10055P
ECOGARD’s XC11801 is a plain particulate filter, which is what many CX-30 owners actually need. The listing covers the same years as most picks here: the 2020-2026 CX-30 2.5L, the 2020-2024 CX-30 2.0L, and the 2019-2026 Mazda3 and 3 Sport. It also names the CX-50 and CX-5, but only some CX-5 years share this size, so use the vehicle filter lookup on the listing to be sure.
ECOGARD says the media filters up to 99.5% of dust, pollen, air pollution particles, pet dander and other airborne debris before it reaches the cabin. The company also notes that a clean filter helps keep airflow steady through the heating and cooling system, which reduces strain on the blower. For a CX-30 that mostly sees highway miles and the occasional gravel road, that is the job that matters.
There is no carbon or baking soda layer listed, so this filter won’t do much for exhaust smells or a car that carries a dog every day. ECOGARD recommends replacing it on your vehicle maker’s schedule or sooner if airflow drops. Because it skips the extra layers, it is a sensible pick when you simply want a fresh filter in place every year.
View ECOGARD XC11801 on Amazon

3. Febreze RZ18130H: Unscented HEPA Cabin Filter with Charcoal and Baking Soda for CX-30

- Listed for 2020-2026 CX-30 2.5L and 2020-2024 CX-30 2.0L
- Captures up to 99.97% of dust and pollen
- Activated charcoal and baking soda, no added scent
- Replaces Mazda BDGF61J6X
This Febreze filter is made by PUREFLOW and carries the RZ18130H part number. It replaces Mazda’s BDGF61J6X and lists the 2020-2026 CX-30 2.5L, the 2020-2024 CX-30 2.0L, the 2019-2026 Mazda3 and 3 Sport and the 2023-2026 CX-50 2.5L. The Febreze name might suggest a perfume, but this version is unscented by design and adds no fragrance to the cabin.
Odor control comes from activated charcoal and baking soda, which the listing says absorb and neutralize smells at the source instead of covering them. That makes it a good fit for a CX-30 that hauls pets, gym bags or takeout, or for passengers who get headaches from air fresheners. The four-layer media is also rated to capture up to 99.97% of dust and pollen, including sub-micron particles.
PUREFLOW says the design aims to keep pressure drop low, which should help hold airflow steady despite the dense media. A QR code on the box links to vehicle-specific installation videos, and the maker says most cars take under 10 minutes. Keep in mind that no cabin filter can clear a smell that starts in a damp evaporator, so a stubborn musty odor needs a different fix.
View Febreze RZ18130H HEPA on Amazon
4. EPAuto CP773: CF12773 Cabin Air Filter with Activated Carbon for 2020-2025 Mazda CX-30

- Listed for 2020-2025 CX-30 and 2019-2026 Mazda3
- Cross-references FRAM CF12773
- Replaces Mazda BDGF-61-J6X and BDTS-61-J6X
- Contains carbon and soda for fresher air
EPAuto names its filter after the FRAM size it replaces, so the CP773 is the brand’s CF12773 equivalent. The listing ties it to both Mazda part numbers, BDGF-61-J6X and the older BDTS-61-J6X, which makes it easy to match against the filter you pull out. Listed fit runs from the 2020 to the 2025 CX-30, plus the 2019-2026 Mazda3, the 2019-2025 Mazda3 Sport and the 2023-2025 CX-50.
The media includes activated carbon and soda, aimed at keeping air fresher for the driver and passengers. That gives it a middle position between the plain ECOGARD and the heavier odor filters on this list. It is a reasonable choice for a CX-30 that sees stop-and-go traffic or the odd smell from the road, without paying for HEPA-grade density you may not need.
EPAuto recommends replacement every 12 months or 12,000 miles, which lines up neatly with a fall change before heater season. Note that the listing stops at the 2025 model year, so owners of a 2026 CX-30 should confirm fit in the Amazon garage tool or choose a filter that names their year. As with any swap, match the airflow arrow to the old filter.

5. Tomanic BDTS61J6X: Three-Layer Activated Carbon Cabin Filter for 2020-2026 CX-30

- Listed for 2020-2026 CX-30 and 2019-2026 Mazda3
- Electrostatic, pleated and nutshell carbon layers
- Fine 1 to 5 micron fibers with a static cotton layer
- Replaces BDTS61J6X, BDGF-61-J6X and MP111BDGF
Tomanic’s filter is sold under the Mazda number it replaces, BDTS61J6X, and the listing also cites BDGF-61-J6X and MP111BDGF. Fit covers the 2020-2026 CX-30, the 2019-2026 Mazda3 and the 2023-2026 CX-50. Because the filter is labeled by OE number rather than an aftermarket size, it is easy to hold up against the old part and compare. Check that the shape and gasket match before you install it.
The media is built in three stages: a melt-blown electrostatic layer, a pleated particulate layer and a layer of nutshell activated carbon. Tomanic says the fibers measure roughly 1 to 5 microns, and a static cotton layer adds capacity for holding small particles. The carbon is spread through a honeycomb mesh, which the maker says keeps it evenly distributed and strengthens the filter.
That carbon is the reason to choose it. A CX-30 that spends its commute on a busy highway or idling in traffic picks up exhaust smells, and activated carbon is designed to adsorb those gases. The trade-off is that carbon filters are not tuned for the finest particles in the way a HEPA-grade filter is, so allergy sufferers may prefer the PUREFLOW pick instead.
View Tomanic BDTS61J6X on Amazon
6. Dacall Cabin Air Filter: Four-Layer Coconut Carbon Filter for 2020-2026 Mazda CX-30

- Listed for 2020-2026 CX-30 and 2019-2026 Mazda3
- Coconut carbon, particle shield and microfiber mesh
- Reinforced frame meant to hold shape in humidity
- Replaces CF12773, BDGF-61-J6X and BDTS61J6X
Dacall’s filter lists the 2020-2026 CX-30, the 2019-2026 Mazda3 and 3 Sport and the 2023-2026 CX-50. The cross-reference list is one of the longest here, naming CF12773, BDGF-61-J6X, BDTS61J6X, MP111BDGF and WP10545. That long list helps when your old filter carries a different brand’s number than the one you search for.
The listing describes four layers. A coconut carbon layer works on odors and exhaust-related gases, a particle shield captures fine dust and pollen, a microfiber mesh blocks larger dirt, and a reinforced frame is meant to hold its shape in humid conditions. That last point is useful in West Michigan, where weeks of muggy weather keep the A/C running and moisture around the filter housing.
Dacall suggests replacing the filter about every 12 months or 12,000 miles, depending on driving conditions. The company says the size matches the original part and installs in roughly 5 to 8 minutes without changes to the car. It is sold here as a single filter, and the listing points buyers to Amazon’s part finder to confirm fit before ordering. A two-pack is listed separately if you want a spare on the shelf.
View Dacall Cabin Air Filter on Amazon
The Six Filters Side by Side
All six fit the same housing, so choose by the media and by what bothers you most inside the car.
| Filter | Listed CX-30 years | Media | Good match for |
|---|---|---|---|
| PUREFLOW PC99818HX | 2020-2026 (2.5L), 2020-2024 (2.0L) | HEPA-grade plus charcoal | Pollen and fine dust |
| ECOGARD XC11801 | 2020-2026 (2.5L), 2020-2024 (2.0L) | Particulate only | Routine replacement |
| Febreze RZ18130H | 2020-2026 (2.5L), 2020-2024 (2.0L) | HEPA-level plus charcoal and baking soda | Pets and lingering smells |
| EPAuto CP773 | 2020-2025 | Particle plus carbon and soda | Everyday odor control |
| Tomanic BDTS61J6X | 2020-2026 | Three layers with nutshell carbon | Traffic fumes |
| Dacall | 2020-2026 | Four layers with coconut carbon | Humid summers |
If two filters look equal for your needs, lean toward the one whose listing names your exact engine and model year. A filter that slides in snugly with its arrow pointing the right way does more good than a fancier one that leaves gaps.

Changing It on a Grand Rapids Calendar
West Michigan gives a cabin filter a hard year. Tree pollen coats cars in spring, humid summer weeks keep the A/C working, and winter road salt dust gets pulled in through the cowl. By January a tired filter can cut defrost airflow just when you need clear glass.
A fresh filter in late fall sets the CX-30 up for heater season, and a second look in spring helps if anyone in the car has allergies. Our guide on how often to change a cabin air filter covers the signs that mean it’s time sooner than the schedule says.

On current Mazdas the filter sits behind the glove box on the passenger side. Empty the box, release it so it drops down, unclip the filter cover and slide the old element out, noting which way its airflow arrow points. Your owner’s manual shows the exact steps for your year.
Whichever media you pick, the best cabin air filter for Mazda CX30 drivers is one that matches BDGF-61-J6X and gets changed on time.
When a New Filter Doesn’t Fix the Vents
A clean filter should bring back strong airflow right away. If the fan still feels weak, or only some speeds work, the problem is likely the blower motor, its resistor or a blocked duct rather than the filter.

Good airflow that never gets cold points to the refrigerant side. Our article on a car AC blowing warm air walks through the usual causes, and our review of the best car AC recharge kit options explains when a driveway top-up helps and when it only hides a leak.
Windows that fog and won’t clear, a heater stuck on lukewarm or a sour smell that comes back weeks after a new filter all call for a proper look. Our car heater and A/C repair in Grand Rapids diagnoses heating and air conditioning faults on foreign and domestic vehicles, Mazdas included.
More Buying Guides
Frequently Asked Questions
Does the CX-30 use the same cabin filter as the Mazda3?
Yes, for the 2019 and later Mazda3 and Mazda3 Sport. Both take BDGF-61-J6X, the CF12773 size, and most listings name the CX-50 too. The 2014-2018 Mazda3 uses a different filter.
Will a CX-5 cabin air filter fit my CX-30?
Usually not. The 2013-2025 CX-5 is listed for KD45-61-J6X, the CF11811 size, which is a different shape. Check the number on your old filter before ordering.
Is a HEPA cabin filter worth it in a CX-30?
It helps if pollen or fine dust bothers you. HEPA-grade media traps smaller particles than a standard filter, but it can restrict airflow a little more as it loads up, so replace it on schedule.
How often should I replace the CX-30 cabin filter?
Follow the schedule in your owner’s manual. Several filter makers suggest about once a year or every 12,000 miles, and sooner if airflow drops or the vents smell musty.
Vents still weak or smelly after a filter change? Give 456 AutoFix a call at 616-279-3832 on any weekday between 8am and 5pm, or request a heating and A/C check on our contact page.
If your hours don’t line up with ours, leave the CX-30 with our after-hours drop-off at 456 Carrier St NE in Creston.
