As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Plenty of Accords reach the mileage where a front axle starts to click in parking lots. The best CV axle for Honda Accord owners is not one brand: it is the axle built for your generation, engine, transmission and side of the car.
This guide sorts six axles by the Accord years their listings name, from the 2003-2007 cars through the 2018-2022 models. Honda used different axles for the 2.4L, the V6, manual gearboxes and the CVT, so check your exact car on Amazon before you order.
Quick answer
Which CV axle should you put on your Accord?
Start with your model year, engine and transmission. A-Premium sells a matched pair for 2003-2007 2.4L automatics, MOOG and Cardone make new axles for the 2008-2012 era, TRQ pairs suit 2015-2017 cars, and GSP covers 2018-2022. Compare length and spline count with your old axle before installing.
Our Quick Picks
Three picks that span the Accord years: a matched pair for older cars, a coated single axle for the 2008-2015 models and a quiet-running axle for the newest cars.

A-Premium Front CV Axle Set
Both front axles in one box for a high-mileage seventh-generation car.

MOOG 13E004L
Coated housings and a neoprene boot aimed at wet, salty winters.

GSP NCV36200
A passenger-side axle with GSP's Silent Ride design for a smooth drive.
Which Axle Does Your Accord Use?
Each front wheel on an Accord is driven by its own axle. Each has an inner joint that plunges with the suspension and an outer joint that steers, both inside grease-packed boots.
Three details decide which part number you need:
- Generation: the 2003-2007, 2008-2012, 2013-2017 and 2018-2022 Accords each use their own axle designs, and some part numbers change partway through a generation.
- Engine: four-cylinder and V6 cars take different axles even in the same year, and the newer turbo engines differ again.
- Transmission: an automatic, a manual and a CVT can all call for different axles, so a listing that says “automatic only” means exactly that.
Listing Details That Trip Up Accord Owners
The two sides are different lengths on many Accords, so a single-axle listing is only half the job if both boots are torn.
- Title years versus fit chart: some titles name a wider year range than the compatibility line underneath.
- Splines and length: inner and outer spline counts and the compressed length should match the axle you pull out.
- Nut and ABS ring: note whether an axle nut is supplied and whether the wheel speed sensor reads a ring on the axle or one in the hub.
The axle nut on these cars is staked into a slot and is often very tight. Our roundup of breaker bars for stubborn axle nuts covers the leverage side, and your service manual lists the torque value for your year.
Best CV Axle for Honda Accord: Six Axles by Generation
The axles below run from the oldest Accords to the newest. For a broader look at how these makers compare across many vehicles, see our guide to choosing a CV axle brand.
1. A-Premium Front CV Axle Set: Driver and Passenger Pair for 2003-2007 Accord 2.4L

- Driver and passenger axles in one set
- Listed for 2003-2007 Accord 2.4L automatic
- Axle nuts included, M22 x 1.5 thread
- 27-spline inner, 26-spline outer
Seventh-generation Accords are now old enough that both front axles have often seen the same long years of salt and potholes. This A-Premium set puts a driver axle and a passenger axle in one box, and the listing names the 2003-2007 Accord with the 2.4L four-cylinder and an automatic transmission only. Manual cars and the V6 use different axles, so they are not covered here.
The listing gives the numbers you need to compare against the parts you remove. The left axle measures 25.98 inches compressed and the right one 37.8 inches, which shows how different the two sides are on this car. The inner end has 27 splines and the outer end 26, and axle nuts with an M22 x 1.5 thread are included. A-Premium also lists the original Honda numbers and common aftermarket references, which helps when you cross-check a parts receipt.
There is no ABS tone ring on these axles, so the sensor setup on your car should match that before you order. A pair is the sensible buy when both boots are cracked or the car has high mileage. If only one side has failed on a low-mileage car, a single axle may be all you need.
View A-Premium Front CV Axle Set on Amazon
2. MOOG 13E004L: Front Left CV Axle with Rust-Inhibiting Coating for 2008-2015 Accord

- Front left (driver side) axle
- Coated shaft and joint housings
- Heat-treated bearings, races and housings
- Axle nut and inboard bolts where required
MOOG is better known for steering and suspension parts, and its CV axle line follows the same problem-solving approach. The 13E004L is a front left axle, which is the driver side on a US Accord. Its title mentions 2008-2017 models, but the compatibility line beneath lists 2008-2015 Accords and 2009-2014 Acura TSX, so trust the narrower range and run the fit checker for your exact trim.
The features lean toward cars that live in snow country. MOOG applies a coating to the intermediate shaft and to the inboard and outboard housings to slow the corrosion that rain, salt and road grime cause. A neoprene boot keeps water and grit out of the joint, and the bearings, races and housings are heat treated for strength.
MOOG supplies the axle nut and any inboard bolts the job requires, so you are not reusing a nut that has already been staked and torqued once. This is a single axle, not a pair, so order the right side separately if both boots are damaged. It does not fit the passenger side or Accords outside the listed years, and four-cylinder and V6 cars may need different parts.

3. Cardone 66-4254: New OE-Style CV Axle with Retaining Nut for 2008-2012 Accord

- New axle, not a remanufactured core
- Listed for 2008-2012 Honda Accord
- Extra boot bellows where needed
- New axle retaining nut supplied
Cardone sells both remanufactured and new axles, and the 66-series numbers are the new ones. The 66-4254 is listed for the 2008-2012 Honda Accord, which covers the eighth-generation sedan and coupe. The title does not state the side or engine, so open the fitment chart on Amazon and match it to your car before ordering.
Cardone says the axle is engineered to match the original’s form, fit and function, which is what most owners want from a direct replacement. The neoprene boots get extra bellows where the design calls for them, aimed at the bending stress that cracks boots, the most common starting point for a failed joint. The grease is chosen to handle high temperatures and high torque.
Every Cardone drive shaft comes with a new axle retaining nut, since the original is often worn or damaged when it comes off. That saves a trip to the parts counter halfway through the job, when the car is already up on stands. This axle suits owners who want a single new unit built to the factory pattern; if you need both sides, check whether the opposite side uses a different Cardone number.
View Cardone 66-4254 on Amazon
4. Detroit Axle V6 Front Left CV Axle: Driver Side for 2008-2012 Accord J35Z2

- 2008-2012 Accord V6 with automatic
- Engine code J35Z2
- 27 1/8 in overall, 29/30 spline
- No ABS ring on the axle
The 3.5L V6 Accord sends more torque through its axles than the four-cylinder car, and it uses its own part numbers. This Detroit Axle listing is narrow on purpose: it names the 2008-2012 Accord with the V6, engine code J35Z2, and an automatic transmission. It is the front left, or driver side, axle only.
The specification line makes it easy to compare with the old part. The overall length is 27 1/8 inches, with 29 splines at the inner joint and 30 at the outer joint, and the inner end is male. The listing states there is no ABS ring on the axle, which matches cars that read wheel speed elsewhere, but check your old axle to be sure.
Note that the listing describes this unit as remanufactured in Detroit, rather than newly built, and it carries a lifetime warranty according to the listing. That makes it a different kind of buy from the new axles in this guide, so weigh it with that in mind. It will not fit four-cylinder Accords, manual cars or the passenger side, so confirm the engine code under the hood before you order.
View Detroit Axle V6 Front Left on Amazon

5. TRQ Front CV Axle Set: Driver and Passenger Pair for 2015-2017 Accord

- Driver and passenger axles in one kit
- Listed for 2015-2017 Honda Accord
- Neoprene boots
- Cross-references 66-4338 and 66-4339
TRQ is a parts brand that sells mostly direct-fit replacements, and this kit includes both front axles for the 2015-2017 Accord. That is the facelifted ninth-generation car. Earlier 2013-2014 cars and different engines use other numbers, so the fit checker on Amazon is the step not to skip.
The listing gives Honda references 44305T2BA21 and 44306T2BA00 plus aftermarket cross-references such as Cardone 66-4338 and 66-4339 and GSP NCV36076 and NCV36210. Those numbers are useful if you have a receipt or a parts catalog page for your car, or if the old axle still has a readable label on its shaft. TRQ says the axles are built to meet or exceed original specifications, with neoprene boots for durability.
TRQ also publishes do-it-yourself videos for many of its parts, which can help if you plan to do the swap at home. The parts arrive pre-assembled as direct replacements, so there is no boot, clamp or joint work before installation. TRQ backs the set with a limited lifetime warranty, according to the listing. A two-axle kit like this is a sensible choice when both boots have cracked, but it is more than you need if only one side is worn.
View TRQ Front CV Axle Set on Amazon
6. GSP NCV36200: Front Right CV Axle with Silent Ride Technology for 2018-2022 Accord

- Front right (passenger side) axle
- Listed for 2018-2022 Accord
- Heat-treated components
- Stainless-steel band clamps
The tenth-generation Accord arrived for 2018 with turbocharged engines, and its axles changed with it. GSP’s NCV36200 is a front right, or passenger side, axle listed for 2018-2022 Accords. Other sellers cross-reference this number to the 1.5L turbo with the CVT, so confirm your engine and transmission before ordering, since the 2.0L car may use something else.
GSP builds this axle with what it calls Silent Ride Technology, a design aimed at a smooth, quiet ride, which matters on a car that is otherwise quiet inside. The components are heat treated for strength, and the boots are held with stainless-steel band clamps that resist corrosion better than plain steel bands. GSP backs the axle with a limited lifetime warranty, according to the listing.
GSP is one of the larger names in new aftermarket axles, and its catalog covers many Honda models. This is a single axle, so the driver side needs its own matching part if that boot is also torn. It does not fit older Accords, and the listing does not mention an axle nut, so plan to pick up a new one for the hub side.
Matching an Axle to Your Accord Generation
Use this table to narrow the field, then confirm the exact part with your year, engine and transmission.
| Accord years | Axles in this guide | Sold as | Check before ordering |
|---|---|---|---|
| 2003-2007 | A-Premium front set | Driver and passenger pair | 2.4L automatic only; ABS ring not included |
| 2008-2012 | MOOG 13E004L, Cardone 66-4254, Detroit Axle V6 | Single axles | Four-cylinder or V6, and which side |
| 2013-2015 | MOOG 13E004L | Single front left axle | Fit chart lists 2008-2015 only |
| 2015-2017 | TRQ front set | Driver and passenger pair | Engine and transmission |
| 2018-2022 | GSP NCV36200 | Single front right axle | 1.5L or 2.0L engine |
Nothing here is listed for the 2023 and later Accord, so check the dealer or a fit checker for those cars. If your front end also hums at highway speed, a hub may be wearing alongside the axle, and our picks for the wheel bearing for a Honda cover that part.

Salt, Slush and Torn Boots in Grand Rapids
Most Accord axles in West Michigan do not wear out on their own. A boot hardens through cold starts, cracks, and then lets in salty slush that grinds the joint from the inside.
- Check at every oil change: turn the wheels to full lock and look at both boots on each side for splits or a ring of grease.
- Act on a torn boot early: a boot caught before the joint clicks can sometimes be replaced, but once the joint is noisy a new axle is the practical fix.
- Watch the potholes: freeze-thaw holes put sharp loads on axles, struts and bearings alike, and our page on wheel bearings built for heavy loads explains how hub wear shows up.

Safety note: raise the car on a level surface, set it on jack stands rated for its weight and never work under it on the jack alone. Wear eye protection when you break the axle nut loose or pry the inner joint out of the transmission.
Clicking or Shuddering: Axle, Bearing or Engine?
GSP’s guide to inner and outer CV joint failure sums up the split. A worn outer joint clicks or pops in slow, sharp turns, while a worn inner joint shows up as a shudder under acceleration that fades when you coast.

Other faults copy those symptoms. A growl that rises with road speed and changes as you swerve usually points to a bearing, as our article on wheel bearing noise describes. A stumble that feels like a shudder can be a misfire, and our explainer on a check engine light that comes on while the car still drives normally covers what a stored code may mean.
If you cannot tell a drivetrain vibration from an engine problem, our check engine light diagnostic service in Grand Rapids looks at codes and misfire counts before any parts are ordered. For clicks, clunks and torn boots, our suspension and steering repair team can inspect the axles, joints and bearings together.
More Buying Guides
Frequently Asked Questions
What are the best aftermarket CV axles for Honda Accord models?
New axles from established makers such as GSP, MOOG, Cardone and TRQ are the usual aftermarket choices, provided the part number matches your year, engine, transmission and side. Some owners report vibration with certain aftermarket units, and a genuine Honda axle remains the conservative option if that happens.
Is the best CV axle for Honda Accord sold as a pair or one side at a time?
Both exist. A-Premium and TRQ sell driver and passenger sets for specific years, while MOOG, Cardone, Detroit Axle and GSP list single axles. A pair makes sense when both boots are cracked or the car has high mileage.
Why does my Accord vibrate after a new axle?
Check that the inner joint is fully seated in the transmission, the axle nut is torqued to spec and the part number is correct for your engine and transmission. If all three check out, the axle itself may be the cause, and an OE axle is the usual next step.
Can I keep driving with a clicking CV axle?
A faint click in tight turns usually gives you some time, but it only gets worse. A loud clunk, heavy vibration or grease thrown across the wheel well means the axle should be replaced soon, because a joint that breaks leaves the car without drive to that wheel.
Hearing a click every time you pull out of a parking spot? Talk to 456 AutoFix at 616-279-3832 between 8am and 5pm on weekdays, or request an axle and front-end check on our contact page.
If your workday runs into our hours, the after-hours drop-off at 456 Carrier St NE lets you leave the Accord with a note on when the noise starts.
