As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Pull the intake tube off a high-mileage HEMI and you will often find a greasy film inside. The best oil catch can for 5.7 HEMI engines traps that oil, fits your exact engine bay and gets drained on schedule. Fit is the hard part, because a 2015 Ram, a 2020 Ram and a Challenger each want a different kit.
Below are seven direct-fit kits sorted by vehicle and year. For universal cans, see our guide to universal oil catch cans covers those.
Quick answer
Which catch can fits a 5.7 HEMI?
Match the kit to the body, not just the engine. A 2019-and-later Ram 1500 takes the Mishimoto MMBCC-RAM-19PBE or J&L’s passenger-side 3.0, while a 2009-2018 Ram or Ram Classic takes the older Mishimoto or J&L kit. Charger and Challenger owners should look at J&L’s 3061P. Confirm year and engine on Amazon.
Our Quick Picks
Three quick picks: Mishimoto's kit for 2019-and-later Ram 1500 trucks, J&L's separator for the 2009-2018 Ram and Ram Classic, and J&L's 3061P for the Charger and Challenger. All seven are reviewed below.

Mishimoto Ram 2019+ Catch Can
Direct-fit hoses and a stated clamp torque take the guesswork out.

J&L 3.0 Ram 2009-2018 and Classic
One listing that names both the older Ram and the Classic.

J&L 3061P Charger and Challenger
Covers a wide run of HEMI cars under one part number.
Does a 5.7 HEMI Really Need a Catch Can?
Every engine pushes some combustion gas past its rings. The positive crankcase ventilation (PCV) system routes that blow-by back into the intake to be burned, and an oil mist rides along. A catch can in the PCV hose lets the mist condense and drop out first.
The 5.7 HEMI is port injected, so fuel still washes the intake valves, and a catch can is optional rather than essential. Owners fit one mainly to keep oil off the throttle body and out of the intake manifold.
Our oil catch can vs air oil separator comparison explains the two designs, and Mishimoto shows its range on its catch can product page.
Ram 1500 5.7 HEMI Catch Can Fit: Years, Sides and Hoses
HEMI kits are vehicle-specific, and the listings split like this:
- 2019 and later Ram 1500: its own kits, not shared with the earlier body.
- 2009-2018 Ram 1500 and 2019-2021 Ram Classic: the older body, sold on as the Classic.
- Charger, Challenger, 300 and Magnum: different hose routing, often a Z-style bracket on 2011-on cars.
Also check which side the kit serves (J&L’s newer Ram unit is passenger side) and count the hoses, fittings and bracket in each listing.
Best Oil Catch Can for 5.7 HEMI: Seven Kits Sorted by Vehicle
None of these kits covers every 5.7 HEMI vehicle. Read the fit notes, then confirm year, model and engine on Amazon.
1. Mishimoto MMBCC-RAM-19PBE: Baffled Catch Can with 50-Micron Bronze Filter for 2019+ Ram 1500 5.7L

- Listed for the 2019 and later Ram 1500 5.7L
- 50-micron bronze filter separates oil from air
- Direct-fit hoses, install listed at under one hour
- Mishimoto Lifetime coverage
Mishimoto built this kit around the redesigned Ram 1500, and the listing names the 2019 and later truck with the 5.7L HEMI. It is a single can that mounts in line with the PCV system, so crankcase vapor passes through it on the way back to the intake rather than going straight in.
Inside, a 50-micron bronze filter does the separating. Oil mist clings to the filter and drips into the bottom of the can, while the cleaned air carries on through the hose. The kit uses direct-fit hoses, which means no cutting lengths of generic line to suit, and Mishimoto puts the install at under one hour. The listing also gives a clamp torque of 22 inch-pounds for the worm-gear clamps and warns against going past 27, since over-tightened clamps can cut hose.
It suits an owner who wants a clean, factory-looking install on a newer truck. It is not the kit for a 2009-2018 Ram or a Ram Classic, which use a different layout, and it does not cover the HEMI cars. Mishimoto backs it with its Mishimoto Lifetime coverage. Confirm your year and engine on Amazon before you order.
View Mishimoto Ram 2019+ Catch Can on Amazon
2. J&L Oil Separator 3.0: 3 oz Passenger-Side Separator for 2019-2026 Ram 1500 5.7L

- Listed for 2019-2026 Ram 1500 5.7L, passenger side
- Fine stainless steel mesh filter
- 3 oz tank with knurled, removable base
- O-ring seal at the base to prevent leaks
J&L Oil Separator Co. sells its 3.0 separator in many vehicle-specific versions, and this one is listed for the 2019-2026 Ram 1500 with the 5.7L, on the passenger side. That side designation matters, so match it to the instructions.
The filtering is done by a fine stainless steel mesh. According to the listing, the mesh traps the small oil droplets and lets them fall once they are heavy enough, which collects the oil in the tank instead of the intake. The tank holds 3 ounces, and the base is knurled so you can grip it and twist it off to drain, with an O-ring sealing it when it goes back on. J&L suggests checking the unit after the first 1,000 miles and says most applications run 2,500 to 3,500 miles before it fills, while noting that every vehicle is different.
This suits an owner who wants to watch the drain interval closely, since the twist-off base makes regular checks easy. A 3 ounce tank does need more frequent emptying in cold, short-trip driving. It is not for the older body or the Ram Classic. Confirm year, cab and engine on Amazon before buying.
View J&L 3.0 Ram 2019+ Passenger Side on Amazon

3. Mishimoto MMBCC-RAM-09PBE2: Billet Baffled Catch Can for 2009-2018 Ram 1500 5.7L

- Listed for the 2009-2018 Ram 1500 5.7L
- Billet 6061 aluminum can with Viton O-rings
- 50-micron bronze filter
- Application-specific mounting bracket
The older-body Ram gets its own Mishimoto kit, and this listing names the 2009-2018 Dodge Ram 1500 with the 5.7L. Like the newer version, it is a single can that sits in line with the PCV system and catches oil before the vapor returns to the intake.
The can is machined from billet 6061 aluminum and sealed with Viton O-rings, a material chosen for its resistance to oil and heat. Separation comes from a 50-micron bronze filter, and Mishimoto describes the can design as patent pending. The kit includes an application-specific bracket that holds the can in a serviceable spot, which matters more than it sounds: a can that is awkward to reach tends to get drained late, and an overfull can stops doing its job.
This is a sensible match for a 2009-2018 truck that sees mixed driving and regular oil changes, since draining fits into that routine. The listing does not name the 2019-2021 Ram Classic, so ask the seller if you drive one, and it does not fit the newer body or the HEMI cars. Mishimoto covers it with Mishimoto Lifetime. Match the listing’s fit data to your own year, model and engine before you add a oil catch can for 5.7 hemi to the cart.
View Mishimoto Ram 2009-2018 Catch Can on Amazon
4. J&L Oil Separator 3.0: 3 oz Separator for 2009-2018 Ram 1500 and 2019-2021 Ram Classic 5.7L

- Listed for 2009-2018 Ram 1500 5.7L
- Also lists the 2019-2021 Ram 1500 Classic 5.7L
- Stainless steel mesh filter, 3 oz tank
- Knurled base with O-ring seal
If you drive a Ram Classic, this is the kit in our list whose listing names your truck outright. J&L lists it for the 2009-2018 Ram 1500 with the 5.7L and for the 2019-2021 Ram 1500 Classic with the same engine, which avoids the guesswork of fitting a 2009-2018 part to a truck sold in 2020.
It shares the 3.0 design with J&L’s other separators. A fine stainless steel mesh catches oil vapor and releases it into the tank once the droplets grow heavy enough to fall. The tank holds 3 ounces, and the knurled base twists off for draining, with an O-ring sealing it on reassembly. J&L recommends a first check at 1,000 miles and says most vehicles run 2,500 to 3,500 miles before the tank fills.
This suits a fleet-style or work truck owner who wants one dependable part number across older Rams and Classics. The smaller tank means you should plan on checking it at each oil change, and more often in a cold winter. It will not fit the redesigned 2019 and later Ram 1500, which has a separate J&L listing. Confirm year, model and engine on Amazon first.
View J&L 3.0 Ram 2009-2018 and Classic on Amazon

5. J&L Oil Separator 3.0 3061P: 3 oz Catch Can for 2005-2023 Charger and Challenger 5.7 HEMI

- Listed for 2005-2023 Charger and Challenger 5.7 HEMI
- Part number 3061P
- Stainless steel mesh filter, 3 oz tank
- Knurled, removable base with O-ring
The HEMI cars need their own routing, and J&L’s 3061P is listed for the 2005-2023 Charger and Challenger with the 5.7 HEMI. Check the listing’s fit chart for your exact year and trim since the Challenger did not arrive until partway through that range.
Inside is the same separator design J&L uses across its 3.0 line. A fine stainless steel mesh traps oil vapor and lets it drop into the tank once heavy enough, keeping it out of the intake. The tank holds 3 ounces and drains through a knurled base that twists off by hand, with an O-ring to seal it. J&L suggests a first check at about 1,000 miles and says most setups go 2,500 to 3,500 miles before filling.
This kit fits a 5.7 car owner who wants a known separator design without building a custom setup. It is not listed for the 6.4L 392 or the supercharged engines, and it does not fit the Ram trucks. A car that sits through the winter should be drained before storage so moisture does not sit in the tank. Confirm fit on Amazon before buying.
View J&L 3061P Charger and Challenger on Amazon
6. RANSOTO Billet Catch Can: Z-Bracket Kit for 2011-up 5.7L and 6.4L HEMI Cars and Grand Cherokee

- Selected 2011-2023 Charger, Challenger and 300
- Selected 2011-2021 Grand Cherokee 5.7L or 6.4L
- T6061 billet can with Z-style bracket
- Two 1/2-inch braided hoses and adapters included
RANSOTO aims this kit at the later HEMI cars and at the Grand Cherokee. The listing names selected 2011-2023 Dodge Charger, Dodge Challenger and Chrysler 300 models and 2011-2021 Jeep Grand Cherokee models with a matching 5.7L or 6.4L PCV layout. It says plainly that it is not meant for the 3.6L, the 6.1L or the supercharged 6.2L unless verified separately.
The body is black T6061 billet aluminum, mounted with a Z-style bracket, and the kit includes two 1/2-inch braided hoses, four ribbed hose-end sleeves, two adapters and a long mounting bolt. The listing calls it a baffled-style design with a removable lower cup for draining. It is honest about its limits: it claims no OEM part number, notes that the sleeves are trim pieces rather than clamps, and warns that hoses may need trimming or rerouting.
That candor makes it a reasonable pick for a hands-on owner of a 2011-up HEMI car or a Grand Cherokee who is happy to adjust the routing. Before ordering, look at your PCV hoses, engine-cover clearance and bracket location against the listing photos. It is not a Ram truck kit. Confirm year, model and engine on Amazon first.
View RANSOTO HEMI Billet Catch Can on Amazon
7. EVIL ENERGY 130ml Catch Can: Bracket and Hose Kit for 2005-2014 Chrysler 300 and Charger 5.7L

- 2005-2014 Chrysler 300 5.7L, 2006-2014 Charger 5.7L
- Also lists the 2005-2008 Dodge Magnum 5.7L
- 130ml tank with fine aluminum mesh filter
- Custom bracket, hoses and quick-connect fittings
Owners of the early HEMI cars have fewer direct-fit choices, and this EVIL ENERGY kit is aimed squarely at them. The listing names the 2005-2014 Chrysler 300 with the 5.7L, the 2006-2014 Dodge Charger with the 5.7L and the 2005-2008 Dodge Magnum with the 5.7L.
The can holds 130ml and filters through a fine aluminum mesh that captures oil vapor before it reaches the intake. Its base rotates off for draining, with an integrated O-ring to seal it. EVIL ENERGY includes the hoses, a custom bracket and aluminum quick-connect fittings, plus instructions. The listing recommends checking the can every 800 to 1,600 miles, and it adds a note that a sensitive pressure sensor may set a check engine light above 4,000 feet of elevation.
This suits someone keeping an older 300, Charger or Magnum on the road who wants a bolt-in kit rather than a universal can. The 130ml tank is compact, so plan on regular checks, especially through a cold season of short trips. It is not listed for the Challenger or for later cars, and it is not a truck kit. Confirm your year and engine on Amazon before you buy.
View EVIL ENERGY 130ml LX Catch Can on Amazon
Which HEMI Kit Goes With Which Vehicle
| Vehicle | Years named | Kits from this list | Filter type |
|---|---|---|---|
| Ram 1500 5.7L (new body) | 2019 and later | Mishimoto MMBCC-RAM-19PBE, J&L 3.0 passenger side | Bronze filter or stainless mesh |
| Ram 1500 5.7L (older body) and Ram Classic | 2009-2018, Classic 2019-2021 | Mishimoto MMBCC-RAM-09PBE2 (2009-2018), J&L 3.0 | Bronze filter or stainless mesh |
| Charger and Challenger 5.7 | 2005-2023 (J&L), 2011-2023 (RANSOTO) | J&L 3061P, RANSOTO billet | Stainless mesh or baffled |
| Chrysler 300, Magnum, Grand Cherokee | Varies by kit | EVIL ENERGY 130ml, RANSOTO billet | Aluminum mesh or baffled |
When picking the best oil catch can for 5.7 HEMI trucks, the Ram rows cause the most wrong orders. A 2020 Ram Classic takes the older kit, not the 2019-and-later one.

Draining a Catch Can Through a West Michigan Winter
Short winter trips never let the engine fully warm up, so moisture condenses in the crankcase and shows up in the can as a milky, water-heavy mix. Left too long, it can freeze, so check the can more often from December through March.
Look at it at every visit for our oil change service in Creston and roughly monthly in winter, and recycle the liquid with used oil. Our motor oil guide for Ram trucks covers the oil itself.

Work on a cool engine, wear eye protection and gloves, and keep hoses clear of the exhaust and belts. Torque clamps to the kit’s figure. A can that stays dry for thousands of miles may be plumbed backward.
Check Engine Lights, Stumbles and When to Get Help
A catch can adds joints to a system under vacuum, and a loose fitting lets in unmetered air that can set lean codes. If the truck hesitates when you accelerate after an install, recheck every clamp; for misfires, see our guide to spark plugs for the 5.7 HEMI can help.

A light that comes on but leaves the engine running normally is covered in our piece on a check engine light that comes on while the car runs fine. For a vacuum leak, PCV fault or code you cannot trace, our check engine light diagnostic team in Grand Rapids can find it.
More Buying Guides
Frequently Asked Questions
What is the best oil catch can for 5.7 HEMI Ram 1500 trucks?
It depends on the body. A 2019-and-later Ram 1500 takes the Mishimoto MMBCC-RAM-19PBE or J&L’s passenger-side 3.0. A 2009-2018 truck takes the Mishimoto MMBCC-RAM-09PBE2 or J&L’s older-body kit, which also lists the Ram Classic.
How often should I empty a catch can on a 5.7 HEMI?
J&L suggests a first check at 1,000 miles and says most go 2,500 to 3,500 miles before filling. Check more often in winter.
Can a catch can cause a check engine light?
It can if a hose or fitting leaks and lets in extra air.
Seeing oil in the intake, a new light on the dash or a can that fills too fast? Call 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or set up a visit on our contact page.
Working through our hours? Use the after-hours drop-off at 456 Carrier St NE, Grand Rapids.
