As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Pull the PCV hose off a high-mileage 5.3 V8 and you will often find a film of oil inside it. That oil rides along with blow-by gas into the intake, and on newer trucks it lands on intake valves that never see fuel. Finding the best oil catch can for 5.3 Silverado trucks starts with one question: which generation of truck do you have, because the brackets and hoses differ between them.
Below we explain why the 5.3 benefits from a can, how to match a kit to your model years, and review six direct-fit kits from J&L, Mishimoto, K&N and EVIL ENERGY.
Quick answer
Which catch can fits a 5.3 Silverado?
Buy a direct-fit kit made for your truck’s generation. For 2019 and newer trucks, the J&L 3.0 or Mishimoto’s T1 kit bolts in with brackets and quick-connect hoses. For 2014-2018 trucks, look at Mishimoto’s K2 kit or K&N’s 81-0805. Older 1999-2013 trucks have their own J&L version.
Our Quick Picks
Three quick picks: the J&L 3.0 for 2019 and newer trucks, Mishimoto's K2 kit for 2014-2018 L83 trucks, and the J&L 3.0 for older 1997-2013 Vortec trucks. All six kits are reviewed below; confirm your year and engine on each listing before ordering.

J&L 3.0 (2019+)
A year-specific separator that connects without cutting hoses.

Mishimoto K2 Kit
A bolt-on kit shaped for the K2XX engine bay.

J&L 3.0 (1997-2013)
A version of the J&L 3.0 shaped for Vortec-era trucks.
Why the 5.3 V8 Collects Oil in Its Intake
Every piston engine leaks some combustion gas past its rings. The positive crankcase ventilation (PCV) system draws that blow-by out of the crankcase and routes it into the intake to be burned, and the gas carries oil mist with it. A catch can sits in that hose and gives the mist somewhere to settle before it reaches the intake manifold.
The reason this matters more on later trucks is fuel delivery. GM’s own 5.3L V-8 L84 specification page lists direct injection and a positive crankcase ventilation system, and notes that the L84 builds on the earlier L83. With direct injection, fuel sprays into the cylinder, so nothing washes the back of the intake valves and oil residue can bake into carbon over time.
Match the Catch Can to Your Silverado Generation
A direct-fit kit is shaped around one engine bay, so the model year matters more than the brand. Confirm your year, cab, engine and whether the truck is a Silverado, Sierra, Tahoe or Suburban against the listing before buying. Here is how the 5.3 lineup splits:
- 1999-2013 (Vortec 5.3): port-injected engines in the GMT800 and GMT900 trucks. J&L sells a separate version for these years.
- 2014-2018 (EcoTec3 L83): the first direct-injection 5.3, in the K2XX body. Mishimoto’s K2 kit and K&N’s 81-0805 are built for it.
- 2019 and newer (L84 and L82): the T1 trucks. J&L, Mishimoto and EVIL ENERGY each make a kit for this bay.
Best Oil Catch Can for 5.3 Silverado: Six Direct-Fit Kits
Each kit is listed for a specific span of model years, which we note in every review. Check the fit chart, then compare capacity and what comes in the box.
1. J&L Oil Separator Co. 3.0: Driver-Side Oil Separator for 2019+ Silverado 5.3L

- Listed for 2019-2026 Silverado/Sierra 1500 5.3L and 6.2L
- Also listed for 2021-2026 Tahoe, Suburban and Yukon
- Plug-N-Play design on the driver side
- Easy to service, limited lifetime warranty
J&L Oil Separator Co. builds its 3.0 separators around individual engine bays, and this version is listed for 2019-2026 Chevy Silverado and GMC Sierra 1500 trucks with the 5.3L or 6.2L V8. The listing also names 2021-2026 Tahoe, Suburban, Yukon and Yukon XL models with the same engines.
The listing describes a plug-and-play design, which means the kit is meant to connect to the factory ventilation fittings instead of asking you to cut and clamp hose. That matters on the T1 trucks, where the engine cover, intake and wiring leave little room for improvised routing. J&L says the can is easy to service, and the company backs it with a limited lifetime warranty.
This kit suits an owner of a newer direct-injection 5.3 who wants a tidy install that looks close to factory. It is not the right part for a 2014-2018 K2XX truck or an older Vortec, since those engine bays need a different J&L part. Some 2019 and 2022 trucks were carryover models on the older body, so check your build and the seller’s fit chart before you buy.
View J&L 3.0 (2019+) on Amazon
2. Mishimoto MMBCC-T1-19: Baffled Catch Can Kit with Bronze Filter for 2019+ 5.3L

- Direct fit for 2019+ Chevrolet/GMC 1500 5.3L and 6.2L
- Air diverter, baffle and 50 micron bronze filter
- 3 mm steel brackets and quick-disconnect hoses
- Mishimoto lifetime warranty
Mishimoto’s T1 kit is a direct-fit catch can for 2019 and newer Chevrolet and GMC 1500 trucks with the 5.3L or 6.2L V8. The maker describes it as a complete bolt-on package, with a mounting bracket, hoses with pre-installed quick-disconnect fittings and the can itself, and the listing says installation takes under an hour.
The separation inside the can is layered. Mishimoto lists an internal air diverter and baffle that knock fuel, oil and water out of the blow-by, followed by a 50 micron sintered bronze filter that cleans the gas before it returns to the intake. The brackets are 3 mm thick steel, and both the filter and the can are serviceable. The kit carries Mishimoto’s lifetime warranty.
This is a strong fit for a T1 truck that tows, plows or spends long hours idling, because those uses push more blow-by through the PCV line. Mishimoto recommends checking the can every 1,000 miles until you know how fast your truck fills it. It is not designed for 2014-2018 trucks, which have their own Mishimoto kit, so confirm your model year and engine before ordering.
View Mishimoto T1 Kit on Amazon

3. EVIL ENERGY Air Oil Separator: 3 oz Catch Can with Mesh Filter for 2019+ 5.3L

- Listed for 2019-2026 Silverado 1500 5.3L and 6.2L
- Fine mesh aluminum filter inside a 3 oz can
- Hose, custom brackets and fittings included
- Installs on the PCV side of the engine
EVIL ENERGY’s 3 oz separator is listed for 2019-2026 Chevy Silverado 1500 trucks with the 5.3L and 6.2L, 2019-2022 GMC Sierra 1500 trucks with the same engines, and several 2021 and later Tahoe, Suburban and Yukon models. Note that the Sierra years in the listing stop earlier than the Silverado years, so GMC owners should read the fit chart closely.
Inside the can, a fine mesh aluminum filter catches oil vapor as the crankcase gas passes through. The listing says the kit includes the hose, custom brackets and fittings shaped for this engine layout, so you should not need extra adapters. The maker notes that in most cases only the PCV side of the engine needs a separator.
This kit suits a T1 owner who wants a vehicle-specific install without paying for the heaviest hardware. EVIL ENERGY recommends checking whether the separator needs cleaning after the first 500 to 1,000 miles of driving. The 3 oz reservoir is small, so a truck that makes lots of short winter trips will need draining more often than one that mostly runs the highway.
View EVIL ENERGY 3 oz on Amazon
4. Mishimoto MMBCC-K2-14: PCV-Side Baffled Catch Can Kit for 2014-2018 5.3L

- Direct fit for 2014-2018 Chevrolet/GMC 1500 5.3L and 6.2L
- 3 fl oz anodized 6061 aluminum can
- Hoses with pre-installed quick-disconnect fittings
- Direct-fit bracket and Mishimoto lifetime warranty
The K2 kit is Mishimoto’s direct-fit catch can for 2014-2018 Chevrolet and GMC 1500 trucks with the 5.3L or 6.2L V8. The maker lists the L83 among its engine codes, which covers most 5.3 Silverados from these years, and the can sits on the PCV side of the engine.
The box holds a direct-fit mounting bracket, a 3 fl oz black anodized 6061 aluminum can, two CNC-machined barbed fittings, two hoses with pre-installed quick-disconnect ends, worm gear clamps and mounting hardware. Inside, Mishimoto uses air turbulators and baffles with a sintered bronze filter to separate oil, fuel and water from the blow-by. The listing says the install takes under an hour from start to finish.
This kit is the natural choice for a K2XX truck owner who wants a clean, reversible install. The maker gives a clamp torque of 22 in-lbs and warns not to exceed 27 in-lbs, so a small torque screwdriver helps. The 3 fl oz can fills faster on a high-mileage engine, so check it more often at first. It does not fit 2019 and newer T1 trucks.
View Mishimoto K2 Kit on Amazon

5. K&N 81-0805: Air Oil Separator with OEM-Style Connectors for 2014-2018 Silverado

- Listed for 2014-2018 Silverado and Sierra 1500
- Also listed for 2015-2020 Tahoe and Suburban, 2015-2019 Yukon
- OEM-style connectors and hoses included
- About a 30-minute install per the listing
K&N’s 81-0805 is an air oil separator, the company’s name for a catch can, listed for 2014-2018 Chevy Silverado 1500 and GMC Sierra 1500 trucks, 2015-2020 Suburban and Tahoe models, and 2015-2019 Yukon models. The listing points to its description for the full application list, so read it with your VIN and engine in hand.
The selling point here is the connection hardware. K&N says the kit uses OEM-style connectors and durable hoses, so the separator clicks into the ventilation line the way the factory hose does, and the listing puts installation at about 30 minutes. It is designed to catch oil in the blow-by before it reaches the intake manifold.
This kit suits an L83 truck owner who values a quick, factory-style swap and would rather not handle barbed fittings and worm clamps. The listing gives fewer internal details than Mishimoto does, such as the filter type or the reservoir size, so if those specs matter to you, check the product description before buying. K&N sells a separate part number for 2019 and newer trucks, so this one is only for the K2XX generation.
6. J&L Oil Separator Co. 3.0: 3 oz Separator with Steel Mesh for 1997-2013 GM 5.3L

- Listed for 1997-2013 GM truck/SUV 4.8L, 5.3L, 6.0L, 6.2L
- 3 oz tank with knurled base and O-ring seal
- Fine mesh stainless steel filter
- Driver-side mounting, black finish
This J&L 3.0 separator is listed for 1997-2013 Chevy and GM trucks and SUVs with the 4.8L, 5.3L, 6.0L or 6.2L V8, which takes in the GMT800 and GMT900 Silverado generations. Silverado trucks did not get the 5.3 until 1999, so the useful span for this guide starts there.
J&L lists a fine mesh stainless steel filter that traps oil vapor and lets it drip down once the droplets get heavy enough. The tank holds 3 oz, and its knurled base unscrews by hand for draining, with an O-ring seal to prevent leaks. J&L suggests checking the separator after the first 1,000 miles and says most applications go 2,500 to 3,500 miles before the tank fills, though every vehicle is different.
These trucks use port injection, so the benefit is less about intake valve carbon and more about keeping oil out of the throttle body and intake on a high-mileage Vortec. It suits an older work truck that already uses a little oil. Most of these engines have high mileage by now, so check the PCV valve and hoses while you install it.
View J&L 3.0 (1997-2013) on Amazon
Side-by-Side: Which Kit Fits Which Truck
When two kits cover your truck, choose on filter design and included hardware.
| Kit | Listed fit | Separation (per listing) | Suits |
|---|---|---|---|
| J&L 3.0 (2019+) | 2019-2026 Silverado/Sierra 1500 5.3L and 6.2L | Driver side, serviceable can | Owners who want a plug-in install |
| Mishimoto MMBCC-T1-19 | 2019+ Chevrolet/GMC 1500 5.3L and 6.2L | Diverter, baffle, 50 micron bronze filter | Trucks that tow or work hard |
| EVIL ENERGY 3 oz | 2019-2026 Silverado 1500, 2019-2022 Sierra 1500 | Fine mesh aluminum filter | Budget-minded T1 owners |
| Mishimoto MMBCC-K2-14 | 2014-2018 Chevrolet/GMC 1500 5.3L and 6.2L | Baffles and bronze filter, 3 fl oz | L83 trucks |
| K&N 81-0805 | 2014-2018 Silverado/Sierra 1500, 2015-2020 Tahoe | OEM-style connectors and hoses | Owners who want a quick swap |
| J&L 3.0 (1997-2013) | 1997-2013 GM truck and SUV 4.8L to 6.2L | Stainless mesh filter, 3 oz | Older Vortec trucks |
For a universal can on another vehicle, our oil catch can buying guide reviews kits you plumb yourself. Weighing a can against a separator that drains back to the pan? Our catch can vs air oil separator breakdown lays out the trade-off.

Installing and Draining Through a Michigan Winter
Direct-fit kits are a reasonable driveway job for most owners. Let the engine cool fully, wear safety glasses, and pull the factory PCV hose gently because old quick-connect tabs can snap in cold weather. Mount the bracket first, then connect the hoses so they don’t kink against the intake or the coil packs.
- Start the engine and listen for a hiss at each connection before you close the hood.
- Drain into a used-oil container and recycle it with your old oil.

Grand Rapids winters change what you pour out. Short trips in freezing weather never warm the crankcase enough to drive off moisture, so the can fills with a milky mix of water and oil. That water can freeze in the can or the hoses, which blocks ventilation and lets crankcase pressure build.
From December through March, check the can every couple of weeks if the truck mostly makes short runs. A regular highway drive helps the engine boil off condensation.
When the Can Points to a Bigger Problem
Even the best oil catch can for 5.3 Silverado engines works as a gauge as much as a filter. A can that fills in a few hundred miles, blue smoke at startup or a falling dipstick suggests worn rings or a sticking PCV valve. No catch can fixes worn lifters on AFM or DFM trucks, either, and a ticking noise deserves a proper diagnosis.

A loose hose after installation acts as a vacuum leak, which can set a lean code. If the light came on but the truck drives normally, read what a check engine light means when the car runs fine. A stumble under throttle is covered in our article on why a car hesitates when accelerating.
When you want the cause pinned down, book a check engine light diagnostic in Grand Rapids, and we will read codes and fuel trims before recommending parts. We can also inspect PCV hoses and the can during a scheduled oil change in Creston.
More Buying Guides
Frequently Asked Questions
Does a 5.3 Silverado need an oil catch can?
It is not required, and the truck runs as designed without one. On 2014 and newer direct-injection trucks, a can slows the oil buildup on the intake valves, which owners who keep trucks for high mileage often value.
Which side does the catch can go on a 5.3?
Most direct-fit kits for the 5.3 go in the PCV line, and J&L lists its 3.0 kits as driver side. Follow the instructions for your exact kit, since the hose routing differs between generations.
How often should I empty a catch can on a Silverado?
Mishimoto suggests checking every 1,000 miles until you know your truck’s fill rate. After that, many owners drain at each oil change, and more often in winter when water collects faster.
Will a catch can stop AFM lifter failure?
No. Lifter problems on AFM and DFM engines are mechanical and oiling issues inside the engine. A catch can only cleans the air that the PCV system returns to the intake.
Curious whether your truck’s PCV system is healthy before adding a can? Ring Hendrick and the crew at 616-279-3832 on a weekday between 8am and 5pm, or send us a note through the contact page.
Busy during the workday? Bring the Silverado to 456 Carrier St NE and use the after-hours drop-off, and the keys will be waiting for us when we open.
