As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Plenty of West Michigan families use an Outback for everything, from the commute to a lakeshore weekend with bikes or a small camper behind it. The best trailer hitch for Subaru Outback owners is the one built for their exact model year and trim and rated for the job.
Below we sort the options by generation, explain the ratings, then review six vehicle-specific hitches. If you also tow with a truck, our guide to choosing tow mirrors for a wide trailer covers the mirror side of the setup.
Quick answer
Which trailer hitch fits a Subaru Outback best?
Match the hitch to your generation. For a 2020 to 2026 Outback, the CURT 13494 is a concealed class 3 hitch listed for those years. A 2026 or 2027 Wilderness or XT can use Subaru’s genuine L101SAR001 hitch. For a 2010 to 2019 wagon, the Draw-Tite 76227 is a solid class 3 choice.
Our Quick Picks
Three quick picks, one for each recent Outback generation. All six are reviewed below.

CURT 13494
Concealed cross tube with only the receiver showing.

Subaru L101SAR001 Hitch
Subaru's own hitch for the turbo trims of the new Outback.

Draw-Tite 76227
All-welded custom hitch for the older wagon generations.
Start With Your Outback’s Year and Trim
Outback hitches are vehicle specific. The mounting points changed with each redesign, so a 2010 to 2019 hitch will not fit a 2020 or newer Outback. Three groups cover most of the cars on the road:
- 2010 to 2019: the wagon generations hitch makers group together. Some listings exclude the Outback Sport.
- 2020 to 2025: this generation shares several aftermarket hitches with the Legacy sedan. The Wilderness trim arrived in this generation, so confirm Wilderness fit by trim before ordering.
- 2026 and newer: the redesigned Outback. Subaru says part of the lower rear fascia is easily removable for hitch installation, and the turbo Wilderness and XT have their own genuine hitch.
Towing limits also vary by year, engine and trim. Subaru’s 2026 Outback Wilderness announcement lists a 3,500-pound towing capacity and an accessory hitch with a combined 7-pin and 4-pin connector. For other years, check the owner’s manual and the door jamb placard.
What Matters in an Outback Hitch
Almost every Outback hitch is class 3 with a 2-inch receiver, so the differences are fit, looks and extras. Check four things:
- Ratings, read correctly: a hitch rated for 4,000 pounds does not raise what your Outback can tow. CURT states it plainly: hitch ratings are limited to the vehicle maker’s stated capacities, and you always go by the lowest-rated part in the chain.
- Concealed, exposed or hidden: a concealed main body sits behind the bumper with only the receiver showing, an exposed cross tube is visible under the bumper, and a hidden hitch lets you remove the receiver when you are not using it.
- Wiring: most hitches don’t include it. Trailer lights need a vehicle-specific harness, and the genuine Subaru hitch calls for its own harness.
- Installation: many are bolt-on, but some require removing the bumper cover or taillights and trimming the fascia.
Best Trailer Hitch for Subaru Outback: Six Hitches by Generation
Each listing names the model years it covers. Confirm your year, trim and body style on Amazon before ordering, because no single hitch fits every Outback.
1. CURT 13494: Class 3 Hitch with Concealed Main Body for 2020-2026 Outback

- 3,500 lb GTW and 350 lb TW
- Concealed main body, 2-inch receiver
- A-coat and black powder coat finish
- Listed for 2020-2026 Outback and 2020-2025 Legacy
The CURT 13494 is a class 3 receiver hitch made for the 2020 and newer Outback, and the same part also fits the Legacy sedan of those years. It gives you a standard 2-inch receiver, so standard 2-inch accessories fit. CURT’s 13494 page lists a 3,500-pound gross trailer weight and a 350-pound tongue weight, tested to SAE J684.
Its main feature is the concealed main body. The cross tube sits behind the rear fascia, so with nothing in the receiver the car keeps a tidy look and only the opening shows. CURT coats each hitch inside and out with a liquid A-coat, then cures a black powder coat over it, which matters on a car that sees Michigan road salt. The receiver has an open back, so dirt and slush can be cleaned out.
Installation hardware is included, and CURT’s application list covers all 2020 to 2026 Outback styles, though Wilderness owners should still confirm by trim. CURT notes the hitch is not compatible with vertical hanging bike racks, and the hitch rating never raises your Outback’s own towing limit. Wiring for trailer lights is sold separately.
2. Subaru L101SAR001: Genuine 2-Inch Hitch for 2026-2027 Outback Wilderness and XT

- Genuine Subaru accessory hitch
- 3,500 lb towing and 350 lb tongue weight
- For 2026-2027 Outback Wilderness and XT
- Harness H771SAR000 sold separately
This is Subaru’s own accessory hitch for the redesigned Outback, part number L101SAR001. The listing names the 2026 and 2027 Outback with the turbo engine, meaning the Wilderness and XT trims, and it gives a 2-inch receiver rated for 3,500 pounds of towing and 350 pounds of tongue weight. That matches the 3,500-pound towing capacity Subaru quotes for the 2026 Wilderness.
The main reason to choose the genuine part is how it fits with Subaru’s other towing accessories. Subaru lists a matching wiring harness, part H771SAR000, which has a combined 7-pin and 4-pin connector and a pigtail for trailers with electric brakes. The listing says that harness is required for proper operation, and a ball mount and a fascia panel are separate parts as well, so plan the full kit before ordering.
The hitch ball is not included either. Because it is built for the turbo trims, it is not the part for a base 2026 Outback, and the listing does not cover 2025 or older cars. It suits owners who want a factory look and fit on a new Wilderness or XT.
View Subaru L101SAR001 Hitch on Amazon

3. Draw-Tite 76227: Class 3 Hitch Rated 4,000 lbs for 2010-2019 Outback

- 4,000 lb GTW and 600 lb TW
- Standard 2-inch square receiver
- All-welded steel, two-part powder coat
- Listed for 2010-2019 Outback wagon, except Sport
The Draw-Tite 76227 is a custom class 3 hitch for the 2010 to 2019 Outback wagon, and the listing excludes the Outback Sport. Draw-Tite builds it to the vehicle maker’s mounting points for a direct fit, and it uses a standard 2-inch square receiver. The listing rates it for 4,000 pounds of gross trailer weight and 600 pounds of tongue weight.
Those numbers are the hitch’s limits, not your car’s. Older Outbacks have their own towing and tongue limits in the owner’s manual, and those always win, so the extra headroom mainly means the hitch is not the weak point. Draw-Tite says each hitch is all-welded steel and is tested to V-5 and SAE J684 standards, with a two-part black powder coat to resist rust.
That finish is useful on a car that has already seen ten or more salty winters, though a rusty bumper area or frame rail should be checked before you bolt anything on. The listing notes the hitch is not suitable for weight distribution systems. Wiring is a separate purchase if you plan to tow a trailer with lights.
View Draw-Tite 76227 on Amazon
4. CURT 13570: Class 3 Hitch with Exposed Round Tube for 2020-2026 Outback

- 3,500 lb GTW and 350 lb TW
- Exposed round cross tube design
- Gloss black powder coat over A-coat
- Includes installation hardware
The CURT 13570 covers the same vehicles as the 13494, the 2020 to 2026 Outback and the 2020 to 2025 Legacy, but it takes a different approach to the design. Instead of hiding the main body behind the fascia, it uses an exposed round cross tube that runs visibly under the rear bumper. Ratings are the same, with a 3,500-pound gross trailer weight and a 350-pound tongue weight, tested to SAE J684.
Some owners prefer a hitch they can see and inspect, especially on a car that spends winter on salted roads. The finish follows CURT’s usual process, a liquid A-coat inside and out with a gloss black powder coat cured over it, and the 2-inch receiver has an open back for cleaning. Installation hardware comes in the box, and the receiver accepts any accessory with a 2-inch shank.
CURT rates the installation as advanced, so expect more work than a simple bolt-up. As with the 13494, CURT says it is not compatible with vertical hanging bike racks. It suits owners who would rather have a hitch they can see and reach than one tucked out of sight behind the fascia.

5. Draw-Tite Hidden Hitch 76914: Removable 2-Inch Receiver for 2020-2022 Outback

- Removable 2-inch receiver, no tools
- 3,500 lb GTW and 200 lb TW
- Hard case, anti-rattle pin, weather covers
- Listed for 2020-2022 Outback
The Draw-Tite Hidden Hitch 76914 is built for owners who want a hitch only some of the time. Its main cross tube mounts permanently behind the rear bumper of a 2020 to 2022 Outback, and the 2-inch receiver box attaches underneath when you need it. When the trip is over, the receiver comes off and the car looks the same as it did from the factory.
The listing rates it for 3,500 pounds of gross trailer weight but only 200 pounds of tongue weight, lower than the other newer hitches here. That is enough for a light utility trailer or a small boat, but a loaded two-bike platform rack plus its bikes can approach that figure, so weigh the setup first. The hitch is all-welded steel and Draw-Tite says it exceeds V-5 and SAE J684 standards.
A hard-sided case stores the receiver, an anti-rattle hitch pin and weather covers between uses. It is not suitable for weight distribution systems, and the listed years stop at 2022, so it is not the part for a 2023 or newer Outback. If you tow only a few weekends a year and dislike the look of a permanent receiver, it makes sense.
View Draw-Tite Hidden Hitch 76914 on Amazon
6. CURT 13410 Bundle: Concealed Class 3 Hitch and Tube Cover for 2010-2019 Outback

- 4,000 lb GTW and 600 lb TW
- Concealed main body, 2-inch receiver
- Includes 22272 rubber hitch tube cover
- Listed for 2010-2019 Outback
This bundle pairs the CURT 13410 class 3 hitch for the 2010 to 2019 Outback with CURT’s 22272 rubber hitch tube cover. The hitch has a concealed main body, so like the newer 13494 it tucks behind the rear fascia and leaves only the 2-inch receiver showing. CURT rates the 13410 for 4,000 pounds of gross trailer weight and 600 pounds of tongue weight, tested to SAE J684.
As with any hitch on this list, those ratings are capped by what Subaru allows for your car, so check the owner’s manual for your engine and year. The finish is CURT’s liquid coating under a high-gloss black powder coat, and the receiver has an open back. CURT notes the install requires trimming and removal of the bumper and taillights, and it uses the car’s existing hardware.
The tube cover is the useful extra for a Michigan car. It is a friction-fit plug, so it needs no pin or clip, and it keeps slush and road salt out of the receiver when nothing is mounted. That makes the bundle a sensible fit for an older Outback that carries a bike rack in summer and sits empty through the winter.
View CURT 13410 Bundle on Amazon
Outback Hitches Side by Side
Years and ratings below are as each listing states them. Your Outback’s own limits still come first.
| Hitch | Listed Outback years | Rating (GTW / TW) | Style |
|---|---|---|---|
| CURT 13494 | 2020 to 2026 | 3,500 / 350 lb | Concealed main body |
| CURT 13570 | 2020 to 2026 | 3,500 / 350 lb | Exposed round cross tube |
| Draw-Tite 76914 | 2020 to 2022 | 3,500 / 200 lb | Hidden, removable receiver |
| Subaru L101SAR001 | 2026 to 2027 Wilderness and XT | 3,500 / 350 lb | Genuine accessory |
| Draw-Tite 76227 | 2010 to 2019 (except Sport) | 4,000 / 600 lb | Standard class 3 |
| CURT 13410 bundle | 2010 to 2019 | 4,000 / 600 lb | Concealed, with tube cover |

If you mostly carry bikes or a cargo box, the 350-pound tongue rating on the newer hitches is the number to compare against the rack plus its load. For a small camper or utility trailer, weigh the loaded trailer and keep it under the figure in your manual, not the one stamped on the hitch. Trailers with electric brakes need a controller and a brake-ready harness, which our trailer brake controller shortlist explains.
Living With a Hitch Through a West Michigan Winter
A receiver tube sits low at the back of the car, right where road salt and slush collect from November to March. Rust inside the tube makes a ball mount or bike rack hard to pull out, and a seized hitch pin is a common spring surprise. A few habits help:
- Cap the tube: a rubber tube cover keeps salty slush out when nothing is plugged in.
- Pull accessories in winter: a ball mount left in all season can rust in place.
- Rinse and check the pin: wash the underside after a salty stretch and work the hitch pin and clip so they stay free. A locking pin from our hitch lock guide also keeps a rack from walking away.
- Check the plug: salt corrodes trailer wiring connectors, so add a quick look at the plug to your winter car maintenance checklist.

Heading north with a trailer in the cold? Pack a winter car emergency kit with gloves and a flashlight. If the Outback is slow to crank on a frosty morning before the trip, read our notes on a car not starting in cold weather before you load up.
When the Outback Needs a Mechanic
Many owners bolt on a hitch themselves. Trouble usually shows up later, in the wiring or in how the car handles with weight on the back.

If trailer lights flicker, a turn signal goes dead or a fuse keeps blowing after a harness install, our car electrical repair in Grand Rapids traces the fault. A rear end that sags or bounces under a loaded rack points to worn shocks or springs, which our suspension repair team checks. Towing also works the brakes harder, so a soft pedal or grinding after a trip deserves a brake inspection.
More Buying Guides
Frequently Asked Questions
Will a 2015 Outback hitch fit a 2021 Outback?
No. The 2010 to 2019 and 2020 and newer generations use different hitch designs, so buy a hitch whose listing names your model year. Check the trim too, since some listings exclude certain versions.
What is the best trailer hitch for Subaru Outback Wilderness models?
For a 2026 or 2027 Wilderness, Subaru’s genuine L101SAR001 hitch is built for that trim and pairs with its own wiring harness. For a 2022 to 2025 Wilderness, use the hitch maker’s vehicle lookup to confirm the part fits that trim before you buy.
Can my Outback tow 4,000 pounds with a 4,000-pound hitch?
Not unless Subaru rates your car for it. The hitch rating is a limit for the hitch only, and the vehicle’s towing capacity and tongue weight in the owner’s manual set the real maximum.
Do I need wiring with a hitch for a bike rack?
Not for most bike racks or cargo carriers, which plug into the receiver only. You need a wiring harness for any trailer with lights, and for racks that carry their own light board.
Trailer lights acting up behind your Outback, or the back end riding low after you added a rack? Call 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday through Friday, or set up a wiring or suspension check on our contact page.
Need the Subaru for the school run and the commute? Unload the bikes, unhook the trailer and leave the car at 456 Carrier St NE in Creston on your way home using our after-hours drop-off, with a quick note on which lights or noises are bothering you.
