456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Bike Rack or Trailer? Best Trailer Hitch for Tesla Model Y by Year

best trailer hitch for tesla model y: stunning aerial view of a highway winding through terraced hills and lush greenery

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Most Model Y owners who want a receiver are thinking about a bike rack, a cargo carrier or a small utility trailer. The best trailer hitch for Tesla Model Y is the one listed for your exact model year, rated for the job and bolted to the car’s own mounting points without guesswork.

Below we sort out fit by year, explain how hitch ratings relate to the car’s limits, then review six 2 inch receivers listed on Amazon. If you plan to pull a wider trailer, our guide to tow mirrors covers seeing past it.

Quick answer

Which hitch fits a Tesla Model Y?

Pick a 2 inch Class 3 receiver listed for your model year. For a 2020 to 2024 car, the Draw-Tite 76430 is a name-brand bolt-on tested to SAE J684. For the 2025 refresh, look for a listing built for that bumper, such as the Autekcomma. Tow only within Tesla’s own rating.

Our Quick Picks

Three quick picks: a name-brand receiver for 2020 to 2024 cars, one built for the 2025 refresh and a raised bolt-on for bike racks. All six are reviewed below.

Draw-Tite 76430 product photo
2020 to 2024 cars

Draw-Tite 76430

Class 3 · 2 in receiver · SAE J684

A name-brand custom receiver built to the earlier Model Y's mounting points.

SuitsBike racks, cargo carriers and light trailers
View on Amazon →
Autekcomma Class 3 Hitch product photo
2025 refresh

Autekcomma Class 3 Hitch

Class 3 · 2 in receiver · no drilling

A bolt-on receiver the listing says is made for the refreshed rear bumper.

SuitsOwners of a 2025 Model Y adding a rack or carrier
View on Amazon →
LOCAME Class 3 Hitch product photo
Bike rack friendly

LOCAME Class 3 Hitch

Class 3 · 2 in receiver · raised tube

A raised receiver that keeps loads off the lower bumper edge.

SuitsPlatform bike racks and cargo carriers
View on Amazon →

Fit by Year and Trim Comes First

The Model Y has two body styles as far as a hitch is concerned. Cars from 2020 to 2024 share one rear bumper and underbody, and most aftermarket receivers were designed around them. The refreshed Model Y that arrived for 2025 has a reshaped rear end, so a hitch built for the earlier car may not line up.

Listings don’t agree on year ranges either, so treat the year range in the title as a starting point, then confirm year, trim and bumper style on the Amazon fit checker before you order.

  • Factory tow package cars: if your Model Y already has Tesla’s hitch, you only need a ball mount or rack, not a second receiver.
  • Trim matters for towing: Tesla’s tow rating and whether it offered the factory hitch can differ by trim and year. Your owner’s manual is the source.

What the Hitch Rating Does and Doesn’t Mean

Every receiver lists a gross trailer weight (GTW) and a tongue weight (TW). Those numbers describe what the hitch itself can carry. They do not raise what the Model Y is allowed to tow or hold on its rear.

Some listings print figures such as 6,500 or 7,000 lb, far above Tesla’s rating for the car. Your limit is the lowest of three numbers: the hitch rating, the ball mount and ball rating, and the vehicle rating in the owner’s manual and on the hitch placard. A loaded bike rack counts toward tongue weight too.

Best Trailer Hitch for Tesla Model Y: Six Receivers in Detail

Two of these come from established hitch makers and cover the 2020 to 2024 car. The other four are bolt-on receivers from newer brands, one of them aimed at the 2025 refresh.

1. Draw-Tite 76430: Class 3 Hitch with 2 in Receiver for 2020-2024 Model Y

Draw-Tite 76430 product photo
Key features
  • Listed for 2020-2024 Model Y
  • 3,500 lb GTW and 525 lb TW rating
  • Tested to V-5 and SAE J684
  • All-welded steel, two-part powder coat

The Draw-Tite 76430 is a custom-fit Class 3 receiver listed for the 2020 to 2024 Tesla Model Y. Draw-Tite builds each custom hitch to the vehicle maker’s specifications, so it mounts to set points on the car rather than relying on a universal bracket. The 2 inch square receiver takes standard ball mounts, platform bike racks and cargo carriers.

The listing rates the hitch for up to 3,500 lb gross trailer weight and 525 lb tongue weight. It is made of all-welded solid steel and finished with a two-part black powder coat to resist rust. Draw-Tite says its receivers are tested to meet or exceed the V-5 and SAE J684 standards and are put through fatigue and stress testing. The listing notes it is not suitable for weight distribution systems, which a Model Y would not use anyway.

This is the safest starting point for an owner of a 2020 to 2024 car who wants a recognized hitch brand. It is not listed for the refreshed 2025 Model Y, so owners of newer cars should look elsewhere. As with any hitch, the car’s own tow rating and tongue weight in the owner’s manual set the real limit, and the hitch rating does not raise them.

View Draw-Tite 76430 on Amazon

2. Autekcomma Class 3 Hitch: 2 in Receiver Designed for the 2025 Model Y

Autekcomma Class 3 Hitch product photo
Key features
  • Listed as designed for the 2025 Model Y
  • No drilling, tools included
  • Standard 2 in receiver opening
  • 1-year warranty per the listing

The Autekcomma Class 3 hitch is one of the few listings that names the refreshed 2025 Model Y directly. Its feature list says it is specifically designed to fit that car, while the title also mentions 2020 to 2026 and the Model YL. That mix is a good reason to run the Amazon fit check with your exact year and trim before ordering.

It uses a standard 2 inch receiver, so it accepts common ball mounts, cargo carriers and bike racks. The listing says no drilling is needed and that all the tools for the job are included, with installation taking about 30 minutes. It quotes a 7,000 lb haul figure and a one-year warranty with round-the-clock customer service.

That 7,000 lb number describes the hitch, not the car. A Model Y can only tow and carry what Tesla allows in the owner’s manual and on the hitch placard, which is well below that figure. For owners of a 2025 car who mainly want a bike rack or cargo tray, this listing is a practical option. If your Model Y came with Tesla’s factory tow package, you already have a receiver and do not need it.

View Autekcomma Class 3 Hitch on Amazon

tranquil countryside scene featuring a dirt path winding through tall grass beside scattered

3. LOCAME Class 3 Hitch: Raised 2 in Receiver for 2020-2026 Model Y

LOCAME Class 3 Hitch product photo
Key features
  • Listed for 2020-2026 Model Y
  • Receiver sits 1/4 to 1/2 in above bumper opening
  • Bolt-on, hardware included
  • Hitch cover included

The LOCAME Class 3 hitch is a bolt-on 2 inch receiver listed for the 2020 to 2026 Tesla Model Y. Its main design point is the receiver position: it mounts about 1/4 to 1/2 inch above the bumper opening. LOCAME says this keeps the receiver from pressing on the bumper below it when the hitch is loaded.

That raised position matters most with a platform bike rack, which levers down on the receiver every time you hit a bump. The hitch has a black powder coat finish over corrosion-resistant plating, and the listing says it was engineered under heat and 8,000 lb of applied pressure. No drilling is required, all the mounting hardware is included, and a cover comes in the box to keep mud out of the tube.

The listing describes towing bicycles, motorcycles, caravans and large luggage, and some of those are well beyond what a Model Y is rated for. Read that list as hitch capability only. Keep any load inside the car’s tow rating and tongue weight from the owner’s manual, and confirm your year and bumper style on Amazon before you buy.

View LOCAME Class 3 Hitch on Amazon

4. Reese 84430: Class 3 Hitch with 2 in Receiver for 2021-2022 Model Y

Reese 84430 product photo
Key features
  • Listed for 2021-2022 Model Y
  • 3,500 lb GTW and 525 lb TW rating
  • Attaches to frame and/or bumper
  • Ball mount, pin and clip sold separately

The Reese 84430 is a Class 3 receiver from another long-standing hitch brand, listed for the 2021 and 2022 Tesla Model Y. It has a 2 inch square receiver opening and attaches to the vehicle’s frame and bumper structure for a clean look under the rear fascia.

The listing rates it for up to 3,500 lb gross trailer weight and 525 lb tongue weight, the same figures as the Draw-Tite above. The ball mount, hitch pin and clip are sold separately. That suits owners who mainly plan to slide in a bike rack, since most racks come with their own pin or locking bolt. If you plan to tow, budget for a ball mount and a properly sized ball, and match their ratings too.

The narrow year range in the title is the main thing to check. If your car is a 2020, a 2023 or a 2024, confirm on Amazon whether this listing covers it or choose a hitch that names your year. As with every pick here, the Model Y’s own tow rating and tongue weight from the owner’s manual and the hitch placard take priority over the hitch figures. Remember that a loaded bike rack counts toward tongue weight.

View Reese 84430 on Amazon

winding dirt path through a lush green meadow with trees under a bright sky

5. XINFOOB Model Y Tow Hitch: Raised 2 in Receiver Adapter, Bolt-On

XINFOOB Model Y Tow Hitch product photo
Key features
  • Listed for 2020-2027 Model Y
  • Uses factory bolt locations, no drilling
  • Raised receiver above bumper opening
  • 3-year limited warranty per the listing

The XINFOOB tow hitch is a Class 3 receiver adapter listed for the 2020 to 2027 Tesla Model Y and not for the Model 3, S or X. The listing says it aligns with factory mounting points inside the bumper and installs at existing bolt locations, with no drilling, cutting or welding. An installation video is provided to walk you through it.

Like the LOCAME, it uses a raised receiver that sits slightly above the bumper opening to reduce contact pressure on the lower bumper. The steel body is powder coated with a corrosion-resistant treatment. It is a receiver only, so a tow hook, ball mount or rack is bought separately to suit what you plan to carry. The listing adds a three-year limited warranty against manufacturing defects.

XINFOOB lists 6,500 lb gross trailer weight and 525 lb tongue weight, and describes uses such as caravans. A Model Y is not rated for loads like that, so treat the figures as the hitch’s strength margin rather than a towing promise. The wide 2020 to 2027 year range spans both body styles, which makes the Amazon fit check with your exact year and trim essential.

View XINFOOB Model Y Tow Hitch on Amazon

6. VNN Class 3 Hitch: 2 in Receiver with Hinged Cover for 2020-2026 Model Y

VNN Class 3 Hitch product photo
Key features
  • Listed for 2020-2026 Model Y
  • Alloy carbon steel, powder coat and plating
  • No drilling, mounts inside the bumper
  • Hinged receiver cover included

The VNN Class 3 hitch is a 2 inch receiver listed for the 2020 to 2026 Tesla Model Y. VNN says it was measured for the car and mounts inside the bumper using holes that line up with the existing screws, so no drilling or extra hardware is needed. That makes it a straightforward bolt-on for owners who want a receiver for occasional use.

The body is made of high-strength alloy carbon steel with black powder coating and a corrosion-resistant plating treatment. A hinged cover is included, which keeps dirt and slush out of the receiver tube when nothing is mounted. The standard 2 by 2 inch opening accepts ball mounts, cargo racks, bike racks and tow hooks.

VNN quotes a towing capacity of 6,500 lb and mentions RVs and roadside assistance among the uses. That figure belongs to the hitch, and a Model Y cannot tow anywhere near it. Stay within the tow rating and tongue weight that Tesla lists in the owner’s manual and on the hitch placard. The year range covers both the earlier car and the 2025 refresh, so confirm year, trim and bumper on Amazon before you order.

View VNN Class 3 Hitch on Amazon

Matching a Receiver to Your Model Y

Use this table to narrow the list by year and by what you plan to carry, then confirm fit on the listing.

Your car and useWhat to look forPicks from this list
2020 to 2024, bike rack or light trailerName-brand receiver with SAE J684 testingDraw-Tite 76430
2021 or 2022, same as aboveSame hitch family, sold without ball mountReese 84430
2025 refreshListing built for the new rear bumperAutekcomma Class 3
Platform bike rack, low bumper contactReceiver that sits above the bumper openingLOCAME, XINFOOB
Hitch used only a few times a yearIncluded cover to keep the tube cleanVNN, LOCAME
Model Y hitch choices by year and use, based on what each Amazon listing states
stunning view of a pathway lined with tall trees in a park setting

Whatever you choose, the car’s own tow rating and tongue weight from the owner’s manual and hitch placard still set the limit.

Wiring, Lights and What the Car Sees

A bare receiver carries a bike rack without any wiring, as long as the rack doesn’t hide your tail lights or plate. A trailer needs working lights. CURT’s 56532 custom harness for the Model Y plugs into the tail-light assembly with no cutting or splicing and gives a standard 4-way flat socket. CURT lists it for 2020 to 2022 cars.

Cars built with Tesla’s tow package can recognize a trailer and change some driving settings. A tail-light harness on an aftermarket receiver may not trigger that behavior, so read the towing section of your owner’s manual before the first trip. Trailer brakes and a brake controller are a separate job, and wiring one into an EV is often work for a shop.

stunning view of a winding road through snowcapped mountains

Salt, Cold and Range in West Michigan

An exposed receiver tube on a low crossover catches every spray of road salt from November to March. Keep the cover on when the tube is empty, pull the hitch pin a few times over winter so it doesn’t seize, and add the receiver to your winter car maintenance checklist along with a check of the mounting bolts.

Cold already cuts EV range, and towing cuts it again. Plan shorter legs between chargers, and remember that many charging stalls are back-in spots, so you may have to unhitch. Pack the basics from our car emergency kit for winter list.

When to Have a Mechanic Look at It

aerial view of a coastal highway beside the ocean

If trailer lights flicker, a turn signal fails only when the trailer is plugged in, or a dash warning appears after a harness install, the fault is usually a loose connector or a poor ground. Our car electrical repair in Grand Rapids covers tracing that kind of wiring problem.

The 12V side of an EV matters too. A Model Y that won’t wake up on a frosty morning often points to the low-voltage battery, which our guide to a car not starting in cold weather explains. If you lift the car to reach the hitch bolts, use proper jack stands for a Tesla on the right lift points.

Frequently Asked Questions

What is the best trailer hitch for Tesla Model Y cars built from 2020 to 2024?

A name-brand 2 inch Class 3 receiver listed for those years, such as the Draw-Tite 76430, is a sound choice. It bolts on, is tested to SAE J684 and suits bike racks and light trailers within the car’s own rating.

Will a 2020 to 2024 hitch fit the 2025 Model Y?

Not reliably. The refreshed car has a different rear bumper, so choose a listing that names the 2025 model and confirm fit on Amazon before you buy.

Can a 6,500 lb hitch let my Model Y tow more?

No. The hitch rating only describes the hitch. The car’s tow rating and tongue weight in the owner’s manual and on the hitch placard are the limit, whichever part is lowest.

Do I need trailer wiring for a bike rack?

Usually not, unless the rack or bikes block your tail lights or license plate. Any trailer needs working lights, which a plug-in harness provides.

Trailer lights on your Model Y acting up since the harness went in? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or ask about a wiring check through our contact page.

Bike season and work hours never line up? Take the rack off, then roll the Model Y into our Creston lot at 456 Carrier St NE after we close and leave it at the after-hours drop-off with a note about which lights misbehave.