456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

From LS Trucks to Civics: Choosing the Best Spark Plugs

best spark plugs: hands reaching into a socket tray

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Spark plugs are one of the cheapest parts in an engine and one of the easiest to get slightly wrong. The best spark plugs for your car are almost always the type, heat range and part number the engine maker specifies, bought from a brand that makes that exact plug well.

Below we cover what actually separates one plug from another, then review six plugs from NGK, Bosch, Champion, Denso, ACDelco and Autolite, each tied to the engines its listing names. If you’re not sure your plugs are due yet, start with our guide on how often to change spark plugs.

Quick answer

Which spark plug brand should you buy?

Buy the plug type your engine maker specifies, in the same heat range, from a major brand. For an LS-based GM V8 truck that can be the NGK TR5GP, for many Jeep, Ram and Honda V6 engines the Bosch 96337 Double Iridium, and for a Civic or CR-V the Champion Iridium 9407.

Our Quick Picks

Three plugs for three of the most common engine families on US roads: a GM V8 truck, a Pentastar or Honda V6, and a Honda four-cylinder.

NGK G-Power Platinum TR5GP product photo
GM V8 trucks

NGK G-Power Platinum TR5GP

Platinum, 8 pack

A platinum plug listed for the Gen III/IV small block 5.3L.

SuitsOlder Silverado and Sierra trucks with the 5.3L
View on Amazon →
Bosch 96337 Double Iridium product photo
Popular V6s

Bosch 96337 Double Iridium

Double iridium, 4 pack

Iridium on both electrodes, with a long US fitment list.

SuitsJeep, Ram, Dodge and Honda V6 owners
View on Amazon →
Champion Iridium 9407 product photo
Honda four-cylinder

Champion Iridium 9407

Iridium, 4 pack

A four-plug set named for two of the most common Hondas.

SuitsCivic and CR-V owners doing their own plugs
View on Amazon →

Three Things That Decide Which Plug Fits

Brand matters less than most shoppers expect. A plug must match the engine physically and thermally first, and the factory plug is usually made by one of the brands below anyway. Three details do most of the work:

  • Part number and dimensions: thread size, reach, seat type (gasket or taper) and hex size must match the head. A cross-reference from your OE number is the safest starting point.
  • Electrode material: copper and nickel plugs wear quickly, platinum lasts longer, and iridium on one or both electrodes lasts longest. Most modern engines came with platinum or iridium, so going back to copper shortens the interval.
  • Heat range: how fast the plug moves heat from its tip into the cylinder head. Too hot risks pre-ignition, too cold lets carbon build up.

Heat Range, OEM and the NGK vs OEM Question

Heat range causes more confusion than anything else on the plug shelf. Champion explains that a plug acts as a heat exchanger, and that hot plugs with a longer insulator nose burn off deposits while cold plugs suit high-load, high-rpm use. Its guide to choosing the right spark plug heat range is clear that for most vehicles, the maker-recommended plug and heat range is the right choice.

That also answers the “NGK vs OEM” and “Denso vs OEM” searches. On many engines, NGK or Denso is the OEM plug, just in a carmaker’s box. Matching the OE part number matters far more than the logo on the insulator.

Best Spark Plugs by Brand: The Picks in Detail

Each of the best spark plugs below is a specific listing with the engines or part numbers it names. Confirm your engine code and model year with the fit checker on Amazon or in the maker’s catalog before you order, since one engine family can use several different plugs.

1. NGK G-Power Platinum TR5GP: 8 Pack for the 5.3L LS-Based V8

NGK G-Power Platinum TR5GP product photo
Key features
  • Listed for 1999-2013 Silverado 1500 5.3L
  • Fine wire platinum tipped center electrode
  • Trivalent plating against corrosion and seizing
  • Copper core and triple seals

The NGK TR5GP is part of NGK’s G-Power line, a platinum plug sold here as a set of eight. This listing names the 1999-2013 Chevrolet Silverado 1500 with the 5.3L V8 and places it in the Gen III/IV small block family, the LS-based engines found in a long run of GM trucks and SUVs. A full set in one box means one purchase covers the whole engine.

NGK describes a fine wire platinum tipped center electrode that lowers the voltage needed to fire, which helps starting and throttle response. The shell carries trivalent metal plating to resist corrosion and seizing in the head, and a copper core helps pull heat away from the tip. Corrugated ribs on the insulator guard against flashover, and triple seals keep combustion gas where it belongs.

Owners comparing the TR5 with the TR6 are looking at heat range: in NGK’s numbering a higher number means a colder plug, so the TR6 runs cooler than the TR5. A stock engine should use the heat range its maker specifies. The same listing title does not cover every LS variant or year, so check your engine size and model year with the fit checker before you order.

View NGK G-Power Platinum TR5GP on Amazon

2. Bosch 96337 Double Iridium: 4 Pack OE Fine Wire Plug for V6 Engines

Bosch 96337 Double Iridium product photo
Key features
  • Iridium firing pin and iridium ground inlay
  • Pre-gapped at the factory
  • Nickel-plated threads, no anti-seize needed
  • Listed for many Chrysler, Jeep, Ram and Honda V6s

The Bosch 96337 is an OE Fine Wire Double Iridium plug, sold in a pack of four, so a V6 needs two packs. Its fitment list is one of the broadest in this roundup: the listing names the 2011-22 Jeep Grand Cherokee, the 2012-22 Wrangler, the 2013-22 Ram 1500, the Dodge Charger, Challenger, Durango and Grand Caravan, plus Honda Odyssey, Pilot and Ridgeline and several Acura models. Bosch adds that engine affects fitment, so the fit checker is still the final word.

Double iridium means both the firing pin and the ground electrode carry iridium, which Bosch says gives four times the life of a standard copper plug. The 360-degree laser welded ultra-fine firing pin is claimed to cut the voltage needed to fire by up to 24 percent. Bosch also states the plug meets OE requirements for modern gasoline engines, including direct injection.

Two practical details make installation simpler. The plugs come pre-gapped, so you shouldn’t need to adjust them out of the box, and the nickel-plated rolled threads are designed to come out of an aluminum head without galling, with no anti-seize required. It suits a daily driver that should go a long stretch between plug changes.

View Bosch 96337 Double Iridium on Amazon

Two metal plug-shaped parts on a gray surface

3. Champion Iridium 9407 RER8ZWYCB4: 4 Pack for Honda Civic and CR-V

Champion Iridium 9407 product photo
Key features
  • Listed for 2006-2022 Civic and CR-V
  • Fine-wire, V-trimmed iridium center electrode
  • V-trimmed ground electrode
  • Heat-Active alloy electrodes

Champion’s Iridium 9407, part number RER8ZWYCB4, comes as a set of four, which is exactly one change for a four-cylinder engine. The listing title names the 2006-2022 Honda Civic and Honda CR-V, two of the most common cars in any parking lot. Honda built several engines across those years, so confirm your engine size and model year before you order.

The center electrode is iridium with a fine-wire, V-trimmed design that Champion says improves ignitability. The ground electrode is V-trimmed as well, which focuses the spark. Champion also describes a Heat-Active alloy that lets the electrodes reach operating temperature quickly and hold it under changing engine loads.

That quick warm-up matters for the short trips many Michigan drivers make in winter, where an engine may barely reach full temperature before it is shut off again. As an iridium plug it is built for long service intervals, so follow the plug change interval in your owner’s manual rather than a general rule. Champion’s own guidance on heat range is to use the plug your vehicle maker specifies, which is the safe choice for a stock Honda that hasn’t been modified.

View Champion Iridium 9407 on Amazon

4. Denso 3421 SK20HR11: Iridium Long Life Plug with Platinum Ground

Denso 3421 Iridium Long Life product photo
Key features
  • Extra long life iridium design
  • 0.7mm fine wire iridium-tipped center
  • Platinum tipped ground electrode
  • Sold as a single plug

Denso is one of the large original equipment suppliers to Japanese automakers, and its Iridium Long Life range is the type often fitted at the factory. The 3421, part number SK20HR11, is sold here as a single plug, so order one per cylinder. Denso lists it as an extra long life iridium plug, the type meant for engines with long factory change intervals.

The center electrode is a 0.7mm fine wire tipped with iridium, and the ground electrode is tipped with platinum. Putting precious metal on both electrodes slows the wear that gradually widens the gap, which is what lets this kind of plug stay in an engine for a long time. A fine center wire also needs less voltage to fire, which helps cold starts and smooth idle.

This plug is the one to look at when your vehicle’s original plug is an SK20HR11 or when a parts catalog cross-references to Denso 3421. It isn’t a performance or colder plug, so it doesn’t suit an engine that has been modified for more boost. As with any single-plug listing, check the fit checker for your engine and confirm the gap your vehicle maker calls for before you install it.

View Denso 3421 Iridium Long Life on Amazon

Sparks from a grinder in a workshop

5. ACDelco 41-101: GM Original Equipment Iridium Spark Plug

ACDelco 41-101 Iridium product photo
Key features
  • GM Original Equipment part
  • Iridium fine-wire electrode
  • One-piece suppressor seal
  • Designed for Chevrolet, Buick, GMC and Cadillac

The ACDelco 41-101 belongs to the GM Original Equipment line, the parts GM engineers design and validate for Chevrolet, Buick, GMC and Cadillac vehicles. ACDelco notes that some parts in this line were sold earlier under the GM Genuine Parts or ACDelco Professional names. For an owner who wants to replace like with like on a GM engine, an OE part number is the most direct route.

It is an iridium plug, and ACDelco lists the benefits as stable idle, smooth running, reliable cold starting and quick acceleration. The small iridium fine-wire electrode is described as helping burn away carbon deposits on the tip as they form. A one-piece suppressor seal blocks radio frequency noise that can interfere with vehicle electronics, and it also helps prevent combustion leakage.

This is a different part number from the 41-162 and 41-110 plugs covered in our other comparisons, and it doesn’t fit every GM engine. The listing gives no vehicle list, so look up the plug your engine takes in your owner’s manual or with the fit checker before you buy, and check the quantity in the listing so you order enough for every cylinder. It suits owners who want the factory part without a dealer trip.

View ACDelco 41-101 Iridium on Amazon

6. Autolite Iridium XP XP5325: 4 Pack Iridium Plug with Platinum Ground

Autolite Iridium XP XP5325 product photo
Key features
  • 0.6mm laser welded iridium finewire
  • Platinum protected ground electrode
  • Up to 100,000 miles depending on engine
  • Nickel-plated, corrosion resistant shell

Autolite has made spark plugs since 1936, and the Iridium XP is its main iridium line for everyday vehicles. The XP5325 comes in a pack of four, and the listing cross-references it to several other part numbers, including ACDelco 41-835 and Denso 3191. That makes it a common swap when a parts lookup sends you to one of those numbers, though fitment still depends on your exact engine.

The center electrode is a 0.6mm iridium finewire, laser welded to the tip, and the ground electrode is protected with platinum. Autolite’s Iridium XP page adds that the finewire is enhanced with iridium and ruthenium, that the ground wire is taper cut, and that the shell is nickel plated to resist corrosion. A multi-rib ceramic insulator helps prevent flashover.

Autolite rates the Iridium XP for up to 100,000 miles depending on engine type, and says the design works with all ignition types, including distributorless systems. Its install guide also recommends gapping new plugs to the owner’s manual or the Autolite catalog figure. It suits a driver who wants long-life iridium at a step below the premium lines, as long as the fit checker confirms the part number.

View Autolite Iridium XP XP5325 on Amazon

Matching the Plug to Common Engines

Use this table to shortlist the best spark plugs for your engine. The “listed for” column repeats only what each listing states, and no plug here fits every version of the vehicles named.

PlugTypeListed forSold as
NGK TR5GPPlatinum1999-2013 Silverado 1500 5.3L (LS-based V8)8 pack
Bosch 96337Double iridiumMany 2011-22 Jeep, Ram, Dodge, Honda and Acura V6s4 pack
Champion 9407Iridium2006-2022 Honda Civic and CR-V4 pack
Denso 3421Iridium, platinum groundEngines specifying the SK20HR11Single plug
ACDelco 41-101IridiumGM engines that call for the 41-101Single plug
Autolite XP5325Iridium, platinum groundCross-reference to ACDelco 41-835 and Denso 31914 pack
Best spark plugs in this guide compared by type, listed fitment and pack size.

A note on the “NGK TR5 vs TR55” question: they are separate NGK part numbers that cross-reference to different factory plugs. The TR5GP listing replaces GM numbers such as 19145290, while the TR55GP listing replaces ACDelco 41-902, so look up which one your engine specifies rather than treating them as interchangeable.

Chrome sockets on a black surface

On some transverse V6 engines, the rear bank of plugs sits under the intake plenum, which turns a simple job into a much longer one. If that engine also has a timing belt, owners often pair the plug change with belt service while the engine is opened up. Our roundup of timing belt kit brands and what each kit includes shows the parts involved in that bigger job.

Cold Starts, Road Salt and Fresh Plugs

West Michigan winters are hard on ignition parts. A worn plug needs more voltage to fire, and a cold, dense charge on a January morning asks for even more, so a tired set often shows up first as a rough cold start or a stumble that clears once the engine warms. Short trips across town add carbon, because the engine rarely gets hot enough to burn deposits off the tips, and even the best spark plugs foul sooner under that kind of driving.

Interior of an older car

Salt spray and slush also find their way around coil boots, so check them for cracks or white tracking marks when you change plugs. Thread the new plugs in by hand first and tighten them to the torque the plug maker or vehicle maker gives, especially in an aluminum head.

When New Plugs Won’t Fix It

Even the best spark plugs can’t cure a misfire they didn’t cause. A weak ignition coil, a leaking injector, a vacuum leak or low compression can all set the same misfire codes, and our guide on why a car hesitates when accelerating walks through those causes. If the check engine light is blinking, read about a flashing check engine light before you drive much further.

Side mirror reflecting a snowy road

A plug that comes out oily, glazed or badly worn on one cylinder is a clue worth keeping. Our check engine light diagnostic service in Grand Rapids reads the codes and tests the coil, injector and compression on that cylinder, and when the engine is also due for a belt, our timing belt replacement service lets you plan both jobs for one visit.

Frequently Asked Questions

Are iridium spark plugs worth it?

For most modern engines, yes. Iridium wears slowly, so the plug holds its gap for a long service interval, and many engines came with iridium from the factory. Going back to copper on such an engine means changing plugs far more often.

Is NGK better than the OEM spark plug?

Often NGK or Denso is the OEM plug. What matters is matching the OE part number, type and heat range. A different brand that cross-references correctly will do the same job.

What is the difference between NGK TR5 and TR6?

Heat range. In NGK’s numbering a higher number is a colder plug, so the TR6 runs cooler than the TR5. A stock engine should stay with the heat range its maker specifies.

Do I need to gap new spark plugs?

Check the gap against the figure your vehicle maker or plug maker states. Many iridium plugs, such as the Bosch Double Iridium, come pre-gapped, and a fine iridium center wire should never be bent.

Rough idle after a plug change, or a misfire code that keeps coming back? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up an engine check through our contact page.

Can’t get away from work during shop hours? Bring the car to 456 Carrier St NE after hours and leave it in our drop-off, and we’ll call you once we’ve had a look.