456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Leveled or Stock? Picking the Best Struts for Ram 1500 Trucks

best struts for ram 1500: motorhome at dusk in the hills

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A tired Ram 1500 front end shows it in small ways: the nose bobs after an expansion joint and dives hard under braking. Picking the best struts for Ram 1500 trucks starts with two facts, the generation and the drive type, because the parts are not shared across all of them.

Below we split the choices between the 2009 to 2018 trucks (plus the Classic) and the 2019 and later redesign. If you drive a car or crossover instead, our roundup of shocks and struts for everyday commuters is the better starting point.

Quick answer

What front struts suit a Ram 1500?

Sort by generation and drive type first. A 2009 to 2018 Ram 1500 4WD or a Classic can take a loaded Gabriel ReadyMount for stock height or a Bilstein 5100 pair to level the nose. A 2019 or later truck at stock height bolts in the Rough Country N3 pair. Air-suspension trucks need other parts.

Our Quick Picks

Three quick picks: a leveling Bilstein 5100 pair for 2009 to 2018 4WD trucks, a loaded Rough Country N3 pair for 2019 and later, and a loaded Gabriel unit for older work trucks. All six listings are reviewed below.

Bilstein B8 5100 Front Pair product photo
Leveling, 2009-2018

Bilstein B8 5100 Front Pair

Front pair · 2009-2018 Ram 1500 4WD

A height-adjustable monotube pair for taking the rake out.

Suits4WD owners who want a level stance
View on Amazon →
Rough Country N3 Loaded Pair product photo
Bolt-in, 2019+

Rough Country N3 Loaded Pair

Loaded front pair · 2019-2027 Ram 1500

Preassembled struts that skip the spring compressor.

SuitsDriveway swaps at factory height
View on Amazon →
Gabriel Ultra ReadyMount G57147 product photo
Loaded, 2009-2018

Gabriel Ultra ReadyMount G57147

Loaded front, single · Ram 1500 4WD

A complete corner unit for a stock-height work truck.

SuitsHigh-mileage 4WD trucks and Classics
View on Amazon →

Which Ram 1500 Is in Your Driveway?

Since 2009 the Ram 1500 has used a coilover strut at each front wheel, while the rear axle rides on coil springs with separate shocks. So a strut purchase on this truck is a front-only job, and the truck decides which part fits.

  • 2009 to 2018: the truck most listings target. The Ram 1500 Classic sold from 2019 on is the same design.
  • 2019 and later: a new front end with its own struts.
  • 4WD or RWD: the drive types use different struts.
  • Air suspension: different front units, excluded by most listings here.

Trim matters on the newer truck too. Ram’s 1500 lineup page lists a Bilstein front and rear suspension and a 1-inch raised ride height on the Rebel, so a part for a standard trim may not match it. A 2500 or 3500 4×4 uses a solid front axle with plain shocks, not struts.

Stock Height, Leveled or Full Coilover?

Ram 1500 struts come in three forms.

  • Loaded assembly: damper, spring and upper mount bolted together, so there is no spring work.
  • Bare strut: the damper only. The factory spring and mount move across from the old strut.
  • Performance coilover: a matched damper and spring, often with adjustable ride height.

Most Rams leave the factory with the nose sitting lower than the bed, a stance called rake. Rancho’s tech tip on leveled struts explains that rake helps steering and braking while towing or hauling, and that a spacer on top of an old strut keeps the worn damper and spring in service. A leveling strut renews both.

Only a bare strut needs spring compression, and a truck spring stores a lot of force. Read our comparison of coil spring compressors for strut work before you try it. Change both front struts together so the truck sits even.

Best Struts for Ram 1500: Six Front Listings Compared

Each pick below names the years, drive type and lift range its own listing states. None of them fits every Ram 1500, so enter your year, cab, drive type and trim in Amazon’s fit checker and read the exclusions before you order.

1. Bilstein B6 4600 24-329132: Front Monotube Strut for 2019-2022 Ram 1500 at Factory Height

Bilstein B6 4600 Front Strut product photo
Key features
  • Listed for 2019-2022 Ram 1500, front
  • Part number 24-329132, sold singly
  • Reuses factory coil spring and mounts
  • Truck can be aligned to factory specs

The Bilstein B6 4600 is the brand’s factory-height line for trucks, and part number 24-329132 is the front unit for the 2019 to 2022 Ram 1500. The listing sells it as a single strut, so you need two for the front axle. It is aimed at a truck that keeps its original ride height, with no leveling kit or lift. Confirm your drive type and trim in the fit checker, since Rebel, TRX and air-suspension trucks run different front hardware.

The listing describes a direct fit that uses the factory coil springs and the original mounting points, so nothing on the truck has to be modified. Because the ride height stays where Ram set it, the front end can be aligned back to factory specifications, which helps tire wear stay even. Bilstein pitches the B6 line on precise handling and vehicle control rather than added lift.

This is a bare strut rather than a loaded assembly. The old spring and top mount must be compressed off the factory strut and rebuilt onto the Bilstein, which takes a proper strut compressor or a shop. Pick it to keep your stance with better damping, not to level the front.

View Bilstein B6 4600 Front Strut on Amazon

2. Bilstein B8 5100: Front Strut Pair for 2009-2018 Ram 1500 4WD with 0-2.8 in. Lift

Bilstein B8 5100 Front Pair product photo
Key features
  • Listed for 2009-2018 Ram 1500 without air suspension
  • Front pair with 0-2.8 inch front lift
  • Digressive, velocity-sensitive valving
  • Zinc-plated body; not for RWD trucks

Bilstein’s B8 5100 is the brand’s leveling line, and this listing is a front pair for the 2009 to 2018 Ram 1500 without air suspension. It gives a front lift range of zero to 2.8 inches, so you can keep the factory nose height or raise it to take out most of the rake. The listing states that it does not fit RWD models, which makes it a 4WD part. Trucks with the optional air ride need something else.

The valving is described as digressive and velocity sensitive, reacting to how quickly the suspension moves rather than holding one rate. Bilstein says it tunes each application through road testing for steering precision and control under changing loads and terrain. A zinc-plated finish protects the body from rust and road salt, a practical point for a Michigan truck.

Like the 4600, the 5100 arrives as a bare damper. You move the factory spring and top mount across, and the spring seat position you choose sets the height within the listed range. Raising the front changes the alignment angles, so book an alignment straight after the install. It suits a 4WD owner who wants a level look and firmer control.

View Bilstein B8 5100 Front Pair on Amazon

gravel road along a fence line

3. Rough Country N3: Loaded Front Strut Pair for 2019-2027 Ram 1500 2WD/4WD at Stock Height

Rough Country N3 Loaded Pair product photo
Key features
  • Listed for 2019-2027 Ram 1500 2WD and 4WD
  • Coil springs installed, bolt-on pair
  • 1 3/8 inch bore, nitrogen gas charged
  • For stock-height trucks only

Rough Country’s N3 loaded strut pair is built for the 2019 to 2027 Ram 1500 in both 2WD and 4WD form, at stock ride height. The listing calls it an OE replacement for trucks with no lift, and it states plainly that it is not compatible with leveling or lift spacers. If your truck already sits higher on a leveling kit, look for a lift-specific version instead.

Each strut arrives fully assembled with its coil spring installed, so the swap is a bolt-on job with no spring compressor. The damper uses velocity-sensitive valving that the maker describes as infinitely variable, adapting to the road for a factory-like ride on pavement or rough ground. An oversized 1 3/8 inch bore, nitrogen gas charge, low-friction oil and a hardened chrome piston rod are listed for consistent performance over time.

Because the spring comes with the strut, you also replace a sagging factory spring in the same job, which helps on a high-mileage truck. It suits a newer Ram owner who wants a quick, safe driveway install at the original height, rather than a leveled or lifted build.

View Rough Country N3 Loaded Pair on Amazon

4. Gabriel Ultra ReadyMount G57147: Loaded Front Strut for 2009-2018 Ram 1500 4WD and 2019-2020 Classic

Gabriel Ultra ReadyMount G57147 product photo
Key features
  • Listed for 2009-2018 Ram 1500 4WD and 2019-2020 Classic 4WD
  • Pre-assembled strut and coil spring
  • 6.06 inch stroke, sold as a 1-pack
  • No spring compression needed

Gabriel’s Ultra ReadyMount G57147 is a complete front strut and coil spring assembly for the 2009 to 2010 Dodge Ram 1500 4WD, the 2011 to 2018 Ram 1500 4WD and the 2019 to 2020 Ram 1500 Classic 4WD. It is sold as a single unit, so order two for the front. The listing gives a 6.06 inch stroke, and its interchange numbers help you match the old part off your truck.

The ready-to-install design removes the need to compress a spring, which is the main reason owners pick a loaded assembly. The new unit bolts into the frame pocket and to the lower control arm. Gabriel describes it as pre-assembled with all the parts needed for a DIY install, and as fit and ride tested. The new spring replaces one that may have sagged after years of hauling.

This is a replacement-height part, not a leveling one, so the truck keeps its factory rake. It does not cover RWD trucks or the redesigned 2019 and later Ram 1500. It suits an owner of an older 4WD work truck or Classic who wants a fresh front end at stock height without paying for performance valving.

View Gabriel Ultra ReadyMount G57147 on Amazon

snowy road through misty woods

5. FOX 2.0 Performance 983-02-050: Front Coilover Pair for 2009-2016 Ram 1500 4WD with 0-2 in. Lift

FOX 2.0 Performance Coil-Over Pair product photo
Key features
  • Listed for 2009-2016 Dodge Ram 1500 4WD, gas engines
  • Front pair of struts with springs
  • Adjustable preload ring, 0-2 inch lift
  • Preset at 2 inches; no air ride

The FOX 2.0 Performance coil-over pair, part number 983-02-050, is listed for the 2009 to 2016 Dodge Ram 1500 4WD with a gas engine and no air ride. It is a front pair of struts with springs, meant for trucks at factory height or with up to two inches of front lift. Diesel trucks, RWD trucks and air-suspension trucks fall outside the listing.

Ride height is set with an adjustable preload ring on each coilover, anywhere from factory height up to two inches of lift. The listing notes that the units come preset at two inches, so if you want stock height you will need to back the preload off before installing. Because the springs come with the dampers, the swap does not involve moving the factory springs.

Lifting the front this way changes the suspension angles, so plan a full alignment right after the install. The coilover format suits an owner who wants to level the truck and run a performance damper in one step. It is a poorer fit for someone who simply wants the original ride back on a high-mileage work truck.

View FOX 2.0 Performance Coil-Over Pair on Amazon

6. Rancho RS5000X RS55808: Twin-Tube Front Strut for 2009-2018 Ram 1500 and Ram 1500 Classic

Rancho RS5000X RS55808 Strut product photo
Key features
  • Listed for 2009-2010 Dodge Ram 1500, 2011-2021 Ram 1500
  • Also lists 2019-2023 Ram 1500 Classic
  • 60 PSI nitrogen gas charge
  • Rated for -40 to 248°F internally

Rancho’s RS5000X RS55808 is a bare suspension strut listed for the 2009 to 2010 Dodge Ram 1500, the 2011 to 2021 Ram 1500 and the 2019 to 2023 Ram 1500 Classic. The listing tells buyers to enter year, engine and trim and read the qualifier notes. Do that before ordering, especially on a 2019 or later truck, since the redesigned Ram uses its own front end.

Rancho describes Cross Tuned valving with a rebound system and a compression phase tuned for each vehicle, plus progressive engagement valving that softens small low-speed impacts. The twin-tube body holds all-weather fluid rated for internal temperatures from minus 40 to 248 degrees Fahrenheit. A 60 PSI nitrogen charge is listed to reduce foaming and fade, and a nitro-carburized rod and polyvinyl boot help resist scuffs and rust.

Because it is a bare strut, the factory spring and top mount are reused, which takes a strut compressor. Rancho notes the RS5000X can also pair with a leveling spacer. It suits an owner whose springs are still healthy and who wants a durable, everyday replacement damper rather than a complete assembly.

View Rancho RS5000X RS55808 Strut on Amazon

Matching a Listing to Your Truck

Find the row that matches your truck, then confirm the part number against your VIN. The best struts for Ram 1500 owners are the ones listed for their exact truck.

Your Ram 1500Listing to checkStyleWatch for
2019 to 2022, stock heightBilstein B6 4600 24-329132Bare monotubeSold singly
2009 to 2018 4WD, levelingBilstein B8 5100 front pairBare, height adjustableNot for RWD or air ride
2019 to 2027, stock heightRough Country N3 loaded pairLoadedNot for lifted trucks
2009 to 2018 4WD or Classic 4WDGabriel Ultra ReadyMount G57147LoadedSold per side; buy two
2009 to 2016 4WD gas, 0 to 2 inch liftFOX 2.0 Performance 983-02-050Coilover pairPreset at 2 inches
2009 to 2018 or ClassicRancho RS5000X RS55808Bare twin-tubeSpring compressor needed
Ram 1500 front strut listings compared by generation, ride height and style
boy resting on a tire in a garage

Not every front-end noise points to a strut. A squeak on speed bumps is often a dry bushing or sway bar link, which our article on why a car squeaks when going over bumps sorts out. Worn ball joints also cause wander, so rule them out too.

Salt, Potholes and Ram Front Ends in West Michigan

Grand Rapids spring roads are rough on a full-size pickup. Freeze-thaw potholes slam the front struts into their stops, and a Ram towing or hauling hits each hole with extra weight. Seals wear and the damping fades until the nose floats on the highway.

The warning signs are a front end that keeps bouncing after a dip, heavy nose dive under braking, scalloped wear on the front tires and an oily film on the strut body. Our walk-through on how to tell if struts are bad explains each one.

mechanic sitting beside a wheel

Road salt adds time to the job. The lower strut bolt likes to seize in the control arm, and the upper nuts corrode on the frame bucket. Soak the hardware with penetrating oil the night before and buy new nuts.

Installing Ram Struts and Booking the Alignment

A loaded strut or preassembled coilover is a fair home project with jack stands, a breaker bar and patience. On most 4WD trucks you also unbolt the sway bar link and work the old unit out past the axle shaft. A bare strut needs a proper compressor and some experience.

Whatever you install, get the front aligned afterward. A new strut can sit at a different height than the worn one, and a leveling strut lifts the nose by design, both of which shift camber and toe. Skip it and you get a pull and fast inner-edge tire wear.

city lights through a windshield at night

If you would rather leave it to a shop, our suspension repair service in Grand Rapids handles struts, shocks, mounts and the steering parts next to them. Hendrick, who runs the shop, holds ASE and State of Michigan certifications that include steering and suspension, and our about us page has his background.

Frequently Asked Questions

Do Ram 1500 4WD and RWD trucks use the same front struts?

Usually not. The two drive types use different strut lengths and mounts, and many listings name only one of them. The Bilstein 5100 pair in this guide, for instance, is listed as not fitting RWD trucks, so check the drive type in the fit checker.

Will 2009 to 2018 struts fit a Ram 1500 Classic?

Often, because the Classic carries over the older truck. The Gabriel and Rancho listings here name Classic years outright. They do not fit the redesigned 2019 and later Ram 1500, which has its own front end.

Is a leveling strut better than a leveling spacer?

On a truck with miles on it, generally yes. A spacer keeps the old strut and spring in service, while a leveling strut renews both and sets the new height. Plan an alignment with either one.

Ram floating over dips or diving at every stop sign? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a suspension check on our contact page.

Short on daytime hours? Bring the pickup to 456 Carrier St NE in Grand Rapids whenever it suits you and leave it with our after-hours drop-off.