As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Honda that floats over dips, dives under braking or thumps on every expansion joint is usually telling you its struts are spent. The best struts for Honda owners are not one brand or one box: they are the listing built for your model, generation and corner, because a Civic, an Accord, a CR-V and a Pilot share almost nothing below the springs.
This guide maps out how those four models differ, what to check before you order and six Amazon listings that each name a specific Honda. If you are still deciding whether the struts are the problem at all, our guide on how to tell if struts are bad walks through the signs.
Quick answer
What kind of strut should a Honda Civic, Accord, CR-V or Pilot get?
For a stock Honda, an OE-style damper such as Bilstein B4 or Monroe OESpectrum restores the factory ride, while a complete assembly like KYB Strut-Plus, Monroe Quick-Strut, Gabriel ReadyMount or Unity avoids compressing the spring. Pick the listing that names your model and corner, then confirm year, engine and trim on Amazon.
Our Quick Picks
Three quick picks: an OE-style strut for the tenth-generation Civic, a ready-to-fit assembly for the CR-V and a front pair kit for the Pilot. All six listings are reviewed below.

Bilstein B4 22-291004
An OE-style twin-tube strut for the tenth-generation Civic.

Monroe Quick-Strut 272491
A bolt-in strut, spring and mount unit for the third and fourth-generation CR-V.

Unity 2-11645-11646-001
Both front corners for the second-generation Pilot in one kit.
How Honda Strut Setups Vary Across the Lineup
All four models use a MacPherson strut at each front corner, which holds the coil spring and sets the angle of the wheel. The rear varies by generation, with some using struts and others a separate spring and shock.
- Civic: light front struts; the 2017 to 2020 Si adds adaptive dampers.
- Accord: parts rarely cross between generations.
- CR-V: a heavier crossover that loads its struts harder.
- Pilot: a three-row SUV with longer, stronger struts.
Honda splits most front struts by side, so an axle usually needs two part numbers or a pair kit.
Matching a Listing to Your Exact Honda
None of the listings below covers every version of its model. Use the title as a starting filter and then enter your car in the Amazon fit checker with these details in hand:
- Model year, which also tells you the generation.
- Body style, since sedan, coupe and hatchback can differ.
- Engine and drivetrain, such as a four-cylinder or V6, front-wheel or all-wheel drive.
- Trim, especially sport or performance versions.
- Corner: front or rear, left or right.
Trim matters more on a Civic than most owners expect. Honda explains that the Si’s adaptive damper system uses a solenoid in each damper to firm up the valving in SPORT mode, so a standard Civic strut is not a like-for-like swap there. The Honda part number on your old strut, or the replaced numbers printed in a listing, is the surest cross-check.
Best Struts for Honda: Six Listings by Model and Position
Each pick is a specific Amazon US listing tied to a named Honda. Two cover the Civic, two the Pilot and one each the Accord and CR-V; if your year or side differs, search the same brand line for the matching number.
1. Bilstein B4 22-291004: OE Replacement Front Left Twin-Tube Strut for 2017-2020 Honda Civic

- Front left strut for the 2017-2020 Civic
- Twin-tube OE replacement design
- Constant damping under any load
- Bilstein gas-pressure technology
The tenth-generation Civic is now old enough that plenty of them are on their first set of front struts with a lot of miles behind them. This Bilstein listing is a B4 OE Replacement twin-tube strut, part number 22-291004, and its title names the 2017 to 2020 Honda Civic and the front left corner. The B4 series is meant to bring back the original ride rather than change it.
According to the listing, the strut offers high power reserves, OE-level quality and damping that holds steady under any load, along with the gas-pressure technology Bilstein credits for traction and precise handling. That steady control is what you notice on a commuter car that runs empty one day and full of passengers the next. As a bare strut, it reuses your existing coil spring, upper mount and boot, so the swap calls for a spring compressor.
Only the left side is covered here, so buy the matching right-hand Bilstein number to keep the front axle even. The 2017 to 2020 Si uses adaptive dampers, which makes trim worth checking before you order. Enter year, body style, engine and trim in the Amazon fit checker, and plan an alignment after the job.
View Bilstein B4 22-291004 on Amazon
2. KYB Strut-Plus SR4267: Complete Strut, Spring and Mount Assembly for Honda Civic

- Complete corner unit for the Honda Civic
- KYB Excel-G strut inside
- Application-matched KYB coil spring
- Pre-assembled, no spring compression
KYB’s Strut-Plus line packages a strut, coil spring and upper mount as one complete corner unit, and this listing, SR4267, says it is designed for the Honda Civic. The title does not give model years or a side, so treat it as a Civic part that still needs a fit check for your generation and corner. Inside each unit is a strut from KYB’s Excel-G replacement line.
The listing describes an Excel-G strut with a stronger steel outer shell and damping valves engineered for the application, matched to a KYB spring designed to hold proper ride height longer. Because the spring and mount come already fitted, you avoid the most dangerous step of a strut job and replace aging rubber and bearing parts at the same time. That makes it practical for an older Civic whose mounts have started to creak.
Since the title leaves out years and position, look up SR4267 in the Amazon fit checker with your year, body style, engine and trim before buying, and find its opposite-side partner. A complete assembly carries more weight per box than a bare strut, which is worth knowing if you are working alone. Book an alignment once both front corners are done.
View KYB Strut-Plus SR4267 on Amazon

3. Gabriel Ultra ReadyMount G57055: Front Right Strut and Coil Spring Assembly for 2003-2007 Honda Accord

- Front right assembly for the 2003-2007 Accord
- Strut, coil spring and mount pre-assembled
- No spring compressor needed
- 4.62 in stroke, 17.12 in extended length
The seventh-generation Accord is still a common sight on Michigan roads, and many have tired front struts and sagging springs by now. Gabriel’s Ultra ReadyMount G57055 is a complete front right strut and coil spring assembly, and its listing names the 2003 to 2007 Honda Accord. It arrives pre-assembled, so the spring compressor step drops out of the job entirely.
The listing gives a stroke of 4.62 inches, an extended length of 17.12 inches and a collapsed length of 12.5 inches, which helps when you compare it with the part you are removing. It also prints a long list of interchange numbers, including KYB SR4121 and SR4135 and Monroe 172123R, so you can match it against whatever was installed before. Gabriel describes the unit as fit and ride tested, with G-Force ride control.
This assembly covers the right front corner only; the left side is a separate Gabriel number, and both should go in together. Some Accord trims and body styles from these years use different parts, so run your year, engine and trim through the Amazon fit checker before ordering. Expect to need an alignment afterward, because the strut locates the top of the front wheel.
View Gabriel ReadyMount G57055 on Amazon
4. Monroe Quick-Strut 272491: Strut and Coil Spring Assembly for 2007-2014 Honda CR-V

- Fits 2007-2014 Honda CR-V per listing
- Strut, spring and upper mount assembled
- No spring compressor needed
- Protective coating, salt spray tested
The CR-V carries more weight than a Civic and often hauls a full load of people and gear, so its front struts tend to wear in a way you can feel on the highway. Monroe’s Quick-Strut 272491 is a complete strut and coil spring assembly, and the listing states it fits the 2007 to 2014 Honda CR-V. Everything needed for that corner comes as a single unit with no spring compression.
Monroe says each application uses a coil spring calibrated to restore OE ride height and support the vehicle’s weight, along with a premium upper mount intended to reduce noise, vibration and memory steer. The listing also points to a protective coating and salt spray testing, which carries real weight for a crossover that spends every winter on brined roads. Replacing the mount and spring at the same time also deals with the creaks older CR-Vs often develop.
Monroe asks buyers to use the Amazon Confirmed Fit bar and read any qualifier notes, and that step matters here because left and right corners can carry different numbers. Enter year, engine, drivetrain and trim, check the side, and buy the matching unit for the other corner. An alignment should follow once both are in.
View Monroe Quick-Strut 272491 on Amazon

5. Monroe OESpectrum 72647: Twin-Tube Suspension Strut for 2009-2015 Honda Pilot

- Fits 2009-2015 Honda Pilot per listing
- Twin Technology Active Control System
- Rod-displaced valving tuned per vehicle
- PTFE-banded piston and chrome-plated rod
A loaded Pilot puts a lot of weight on its front struts, and worn ones show up as nose-dive under braking and float over highway dips. Monroe’s OESpectrum 72647 is a bare suspension strut whose listing names the 2009 to 2015 Honda Pilot. OESpectrum is Monroe’s line aimed at bringing back original equipment ride and control.
The listing describes a Twin Technology Active Control System meant to keep control under most conditions while isolating impact noise and harshness, plus rod-displaced valving tuned to each vehicle. It also lists an all-weather fluid with additives for temperature extremes, a PTFE-banded piston and a chrome-plated piston rod with a bronze-reinforced rod guide. The protective boot and jounce bumper are sold separately, so check yours and order new ones if they have split.
As a bare strut, it uses your existing coil spring and upper mount, which suits a Pilot whose springs and mounts are still in good shape. The swap does require a spring compressor and some care, and many owners leave that part to a shop. Confirm year, drivetrain, trim and corner with the Amazon fit checker, replace in axle pairs and book an alignment afterward.
View Monroe OESpectrum 72647 on Amazon
6. Unity 2-11645-11646-001: Front Pair Complete Strut Assemblies for 2009-2015 Honda Pilot

- Front pair kit for the 2009-2015 Pilot
- Top mount, bearing plate and spring included
- Restores factory ride height
- No specialty tools needed
Ordering two single-corner units for a three-row SUV means matching part numbers twice, and this Unity kit removes that step. Listing 2-11645-11646-001 is a front two-wheel complete strut assembly kit, and its title names the 2009 to 2015 Honda Pilot. It pairs Unity part numbers 11645 and 11646, one for each front corner.
Each assembly arrives preassembled with the top mount, bearing plate, bumper, insulators and coil spring, according to the listing. Unity says the units restore factory ride height and are engineered for a trouble-free fit, and that the all-new components remove the need for specialty tools, so no spring compressor is involved. On a second-generation Pilot that has seen many salted winters, replacing the mounts and bearing plates with the struts deals with clunks and stiff steering at the same time.
Because both corners come in one box, the front axle gets matching parts on the same day, which keeps the SUV level and predictable under braking. The kit covers the front only, so the rear dampers are a separate job if they are worn too. Confirm year, drivetrain and trim in the Amazon fit checker, and plan on a wheel alignment once the new assemblies are torqued down.
View Unity 2-11645-11646-001 on Amazon
Side-by-Side: Which Honda Strut Listing Fits Your Job
Picking among the best struts for Honda models mostly comes down to the type column. A bare strut is the damper alone, while a complete assembly arrives with a new spring, seat and upper mount fitted.
| Listing | Honda and position | Type | Keep in mind |
|---|---|---|---|
| Bilstein B4 22-291004 | 2017-2020 Civic, front left | Bare strut | Check trim (the Si has adaptive dampers); right side sold separately |
| KYB Strut-Plus SR4267 | Civic, per listing | Complete assembly | Title gives no years; check generation and side |
| Gabriel ReadyMount G57055 | 2003-2007 Accord, front right | Complete assembly | Pair it with the left-hand unit |
| Monroe Quick-Strut 272491 | 2007-2014 CR-V | Complete assembly | Confirm the corner in the fit notes |
| Monroe OESpectrum 72647 | 2009-2015 Pilot | Bare strut | Reuses your spring and mount |
| Unity 2-11645-11646-001 | 2009-2015 Pilot, front pair | Complete assemblies | Both front corners in one kit |
On a high-mileage Honda, the spring seats and mounts are often as tired as the damper, and a complete assembly replaces them all at once. Go with a bare strut only when the Honda’s springs and mounts are in good shape.

Have a second car from another brand? Our roundup of the best shocks and struts for daily drivers also covers other commuter cars beyond Honda.
Road Salt, Frost Heaves and Honda Struts in West Michigan
Grand Rapids winters work against suspension parts from two directions. Salt brine creeps into spring perches and lower strut bolts, while the freeze-thaw swing every March opens potholes that hammer the dampers. The Car Care Council lists potholes and driving habits among the main causes of wear in its steering and suspension overview, and it suggests a check at least once a year, usually alongside an alignment.
That is why the best struts for Honda cars in this area are often complete assemblies, with fresh perches and hardware in the box instead of a reused, rusty spring seat.

A dry sway bar bushing can creak much like a strut, and our guide to why a car squeaks when going over bumps helps you narrow it down. After a hard pothole hit, our list of pothole damage signs covers what else to look at.
Doing It at Home or Bringing It In
A complete assembly on a Civic or older Accord is a fair job for a careful home mechanic with jack stands and a torque wrench. A bare strut is riskier: the spring must be compressed before the top nut comes off, and a slipping spring can injure you, so read our guide to choosing a coil spring compressor before you try it.
Seized knuckle bolts and the alignment after any front strut swap are other reasons to hand the job over. Hearing a knock instead? Our guide to a clunking noise over bumps lists the likely culprits.

Our team handles suspension repair in Grand Rapids for Hondas and other foreign and domestic vehicles, from struts and shocks to mounts and steering links. Hendrick Hoffman, who owns the shop and leads the work in the bays, holds ASE and State of Michigan credentials in steering and suspension.
More Buying Guides
Frequently Asked Questions
What are the best struts for Honda CR-V models?
It depends on the generation and how much work you want to do. For a 2007 to 2014 CR-V, the Monroe Quick-Strut 272491 is a complete assembly that skips the spring compressor. Check the fit notes for the corner and confirm year and trim on Amazon first.
Do Honda struts need to be replaced in pairs?
Yes. Change both fronts or both rears at the same visit. A new strut next to a worn one leaves the car leaning, braking and turning unevenly, and the tires can wear faster.
Will regular struts fit a Civic Si?
Not on the 2017 to 2020 Si. Honda fitted that trim with adaptive dampers controlled by a solenoid, so a standard Civic strut is not a direct replacement. Run the exact trim through the Amazon fit checker before ordering.
Does a Honda need an alignment after new struts?
After front struts, yes. The strut sets the top of the wheel, so removing it can shift camber and toe. A quick alignment protects the new tires and keeps the steering centered.
Is your Honda wallowing, nosing down hard or knocking on rough pavement? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or set up a suspension check through our contact page.
Can’t get away during our hours? Park the Honda at 456 Carrier St NE, Grand Rapids, MI 49505 and leave the keys with our after-hours drop-off.
