As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A growl from the front of a pickup that rises with speed usually points to a wheel hub, and the parts search that follows tends to end with two familiar boxes. Timken vs moog is one of the most common brand questions we hear at the counter, because both names sit in the same price tier and both claim OE-grade quality.
To keep the match honest, this page compares the two brands in general and then puts one hub from each against the other for a single truck and corner: the front of a 2014-2018 Chevrolet Silverado 1500 with four-wheel drive. Both parts share the interchange number 515160, and an SKF hub with the same cross-reference rounds out the picks as a third option. If you drive something else, our roundup of wheel hub assembly brands and their part numbers covers more makes and models.
Quick answer
Is a Timken or a MOOG hub the better buy for your truck?
Either is a sound choice when the part number matches your truck. Timken is a bearing manufacturer whose HA590491 is sold as an OE-grade Generation 3 unit. MOOG’s 515160 adds a listed quad lip seal and coated studs that help in road salt. Confirm fit, then torque the axle nut to the factory figure.
Our Quick Picks
One front hub from each brand for the same 2014-2018 Silverado 1500 4WD corner, plus an SKF unit that cross-references to the same number. All three are covered in full below.

Timken HA590491
A bearing maker's Generation 3 hub sold against the GM factory number.

MOOG 515160
A sealed hub with listed corrosion features for salted roads.

SKF BR930914
Another bearing maker's hub that ships with a link to SKF's own fitting steps.
Two Companies, Two Routes to the Same Hub
Timken is a bearing and power transmission manufacturer, and its automotive page talks about more than 125 years of specialized expertise. Much of its business serves industrial machinery, rail and power generation as well as vehicles. Its replacement hubs carry that bearing-maker identity, and the listings lean on phrases such as OE-grade replacement rather than on extra features.
MOOG comes at the job from the chassis side. It is a DRiV brand that sells steering, suspension and driveline parts alongside hubs, and it markets itself as the problem solver for repairs that keep coming back. Its hub assemblies page splits the range into premium, high utilization and coated hubs, with seals and heat shields picked per application.
Neither company publishes a simple country-of-origin rule for every hub. Forum owners report boxes from several countries under both names, and the label can change from one batch to the next. If origin matters to you, read the box when it arrives rather than relying on a brand reputation.
What the 4WD front hub does on this Silverado
On the 2014-2018 Silverado 1500 with four-wheel drive, the front hub is a sealed, bolt-on unit. The bearing, the wheel flange with its six studs and the wheel speed sensor for the ABS all live in one assembly, and the front axle shaft passes through the splined center. When the bearing wears, you replace the whole unit rather than pressing in a new bearing.
That matters for the comparison. Because the sensor is part of the hub, a failing unit can switch on the ABS and traction control lights as well as making noise. It also means both brands have to match the factory connector and tone ring, so a correct part number counts for more than the logo on the box.
Timken vs Moog Hub Assembly on Paper
The table lines up what each Amazon US listing states for the 515160 position. Timken’s listing names the numbers it replaces rather than vehicles, while MOOG’s lists the trucks and SUVs directly. Where a listing is silent, the table says so instead of guessing.
| Point | Timken HA590491 | MOOG 515160 | SKF BR930914 |
|---|---|---|---|
| How fit is shown | Replaces 20971870, 103233, 515160, MB50302 | 2014-2018 Silverado 1500 and Sierra 1500, plus 2015-2020 GM SUVs | Cadillac 2013-2018, Chevrolet and GMC 2014-2020 |
| Design named | Generation 3, self-retained bolt-on unit | Sealed bearing with factory preload | Complete hub bearing assembly, meets or exceeds OE specs |
| ABS | Active sensing technology | Supports ABS sensor integration | Not stated |
| Sealing and corrosion | Not detailed | Quad lip seal, coated studs, rust-resistant hub | Not detailed |
| Warranty wording | Includes manufacturer provided warranty, no term given | Contact retailer or seller, no term given | Not stated |
On paper the gap is narrow. MOOG spells out more of its corrosion and sealing features, while Timken keeps its listing short and leans on its bearing engineering. None of the three listings states a warranty term, so ask the seller before you count on coverage.
Timken vs Moog: Three Silverado Hubs in Detail
Each hub below is sold for the same front position on either side of a 2014-2018 four-wheel-drive Silverado 1500. Run your VIN or year, cab and drivetrain through Amazon’s fit checker first, since two-wheel-drive trucks and other model years can take a different number.
Timken HA590491: Generation 3 Front Hub Bearing Unit, Replaces GM 20971870 and 515160

- Bolt-on Generation 3 hub bearing unit
- Replaces 20971870, 103233, 515160, MB50302
- Active sensing technology for ABS
- Sold as an OE-grade replacement
The HA590491 is Timken’s hub bearing unit for the 515160 position, and its listing identifies fit by the numbers it replaces: GM 20971870 along with 103233, 515160 and MB50302. Parts catalogs place that number at the front of 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks with four-wheel drive, plus several related GM SUVs. Because the listing names part numbers rather than vehicles, use Amazon’s fit checker with your VIN or exact truck before you order.
Timken describes the unit as a Generation 3 wheel end system, meaning a self-retained, integrated package bearing that bolts to the knuckle as one piece. The description mentions active sensing technology, which ties into the ABS wheel speed signal, and hub-forming technology that Timken says reduces strain on components. The listing calls it an OE-grade replacement and says it includes a manufacturer provided warranty, without stating a term.
This hub suits a Silverado owner who wants a part from a company that makes bearings for factories as well as the aftermarket. It arrives as a complete unit, so no press is needed. It does not suit two-wheel-drive trucks, and the listing gives few sealing or coating details, so salt-belt buyers may want to compare closely.
View Timken HA590491 on Amazon

MOOG 515160: Front Wheel Bearing and Hub Assembly for 2014-2018 Silverado 1500 with Quad Lip Seal

- Fits 2014-2018 Silverado 1500 and Sierra 1500
- Quad lip seal against water and dirt
- Coated wheel studs, rust-resistant hub
- Supports ABS sensor integration
The 515160 is MOOG’s front wheel bearing and hub assembly for 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks, and the listing also names the 2015-2020 Tahoe, Suburban, Yukon, Yukon XL, Escalade and Escalade ESV. Its part number is the interchange that Timken’s HA590491 replaces, so the two fill the same front position. Confirm the four-wheel-drive fit for your truck in Amazon’s checker, since the listing does not spell out the drivetrain.
MOOG builds this hub around a sealed bearing with a factory preload, which it says keeps the unit quiet at highway speed. A quad lip seal is meant to keep moisture and debris out, and coated wheel studs plus a rust-resistant hub are there to slow corrosion and ease future removal. The listing also states that the hub supports ABS sensor integration, which matters because the speed sensor lives in this assembly.
This hub suits a truck that spends winters on brined roads and an owner who wants the fit listed by vehicle. Like any bolt-on unit it needs a clean knuckle bore and a correctly torqued axle nut. The listing gives no warranty term and directs buyers to the seller, so ask before you buy.
SKF BR930914: Front Wheel Hub Bearing Assembly with 515160 Interchange and OE-Spec Build

- Front hub bearing assembly sold as BR930914
- Listed for 2014-2020 Chevrolet and GMC models
- Meets or exceeds OE specifications
- Box label QR code opens SKF instructions
The BR930914 is SKF’s front wheel hub bearing assembly for GM trucks and SUVs, and its Amazon title lists Cadillac models from 2013-2018 along with Chevrolet and GMC models from 2014-2020. Retail parts catalogs cross-reference the number to 515160 and to Timken’s HA590491, which places it on the same Silverado 1500 four-wheel-drive front corner. The title names makes and years rather than models, so run your exact truck through Amazon’s fit tool.
SKF is a Swedish bearing company, which puts this hub on the same side of the industry as Timken rather than the chassis side where MOOG sits. The listing says the box holds every component needed for a complete wheel bearing replacement and that the part meets or exceeds OE specifications. A QR code on the box label leads to SKF’s instructions and more detailed technical data.
SKF asks for installation by a knowledgeable mechanic with the correct tooling, following its own steps and the vehicle procedure. This hub fits a buyer who wants a bearing-brand choice when the Timken is out of stock. The listing gives no sealing, coating or warranty details, so ask the seller about coverage.

Matching the Brand to Your Truck
For most owners the choice comes down to the conditions the truck lives in and what is already on the other side. The table below is a starting point, not a rule, and the right part number always comes first.
| Your situation | Leans toward | Why |
|---|---|---|
| You want a hub from a bearing manufacturer | Timken HA590491 | Sold as an OE-grade Generation 3 unit |
| The truck sees salted roads all winter | MOOG 515160 | Listed quad lip seal, coated studs and rust-resistant hub |
| You want the fit spelled out by vehicle | MOOG 515160 | Listing names the trucks and SUVs it fits |
| Your first choice is out of stock | SKF BR930914 | Another bearing maker, cross-referenced to 515160 |
| The other side already has a good hub | Same brand as that side | Keeps both front corners on one design |
| Both sides are noisy or the miles are high | Either brand, bought as a pair | Fresh bearings on both sides of the axle |
A quick way to settle the timken vs moog question for your own truck is to look at the parts that are hardest to remove next time. If the last hub fought you off the knuckle, MOOG’s corrosion features may be worth having. If you mainly want a hub from a company that builds bearings for factories, Timken is the natural pick.

How long these hubs should last
Hub life depends far more on how the truck is used and installed than on the label. Deep water, potholes, oversize tires and an axle nut left loose or overtightened all shorten bearing life, and our guide to how long wheel bearings last explains what wears them out early. A correctly torqued hub from any of these brands should give years of service under normal use.
Some cars and older trucks use a bearing pressed into the knuckle rather than a bolt-on hub. Those jobs need a press or a puller set, and our page on the wheel bearing press kit choices for home garages walks through the tools. The 515160 hub on this Silverado does not need one.
Road Salt, Rust and a Hub That Will Not Budge
West Michigan winters are rough on front hubs. Brine and slush pack into the joint between the hub and the steering knuckle, and after a few seasons the two can rust together so firmly that the bolts come out but the hub stays put. Soak the joint and the bolts with penetrant the night before, and expect to use a slide hammer or hub puller on an older truck.

Before the new hub goes in, clean the knuckle bore back to bare metal with a wire brush or abrasive pad. A thin film of anti-seize on the outer bore, kept away from the sensor and connector, makes the next removal easier. Torque the hub bolts and the axle nut to the figures in the service manual for your truck, using a torque wrench rather than an impact gun.
Whichever brand you choose, the timken vs moog decision matters less than a clean, correct install. A hub that seats on rusty scale can run with a slight wobble, and that can wear the new bearing and warp the rotor long before its time.
When the Job Is Better Left to a Shop
Not sure the noise is a hub at all? Tire wear, a dragging caliper or a worn CV joint can sound similar, and our article on wheel bearing noise symptoms helps you narrow it down. A hub with play may also come with an ABS warning, which our guide to an ABS light that stays on covers.

If you do not have a hub puller, a large torque wrench or a safe way to support the truck, a shop visit is the safer route. We handle wheel bearing replacement in Grand Rapids for trucks, cars and SUVs. While the corner is apart we look over the CV axle, ball joints and brakes, and our owner Hendrick Hoffman’s ASE and State of Michigan credentials include steering, suspension and brakes.
More Buying Guides
Frequently Asked Questions
Is Timken better than MOOG for wheel hubs?
Neither wins every time. Timken builds bearings for many industries and sells its hubs as OE-grade, while MOOG lists more sealing and corrosion features on many of its hubs. The right hub is the one sold for your exact year, drivetrain and position, installed and torqued correctly.
Does the hub include the ABS sensor on a 2014-2018 Silverado?
On the four-wheel-drive front, the wheel speed sensor is part of the hub assembly, and the Timken and MOOG listings both refer to ABS. Check that the connector on the new hub matches the old one before you start, and clear any stored ABS codes after the repair.
Should I replace both front hubs at the same time?
It is not required, but on a high-mileage truck the other side is often close behind. Replacing both saves a second teardown, and using the same brand on each side keeps the front end consistent.
Do I need an alignment after a new hub?
A bolt-on hub swap by itself does not usually change alignment. If the tie rod end, ball joint or knuckle was disconnected or replaced during the job, have the alignment checked to protect your tires.
Front end still humming after a new hub? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a wheel bearing inspection on our contact page.
Working the same hours we do? Bring the truck to 456 Carrier St NE after closing, use the after-hours drop-off, and we will take it from there.
