456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Altima Front Hub Showdown: Timken vs Detroit Axle

timken vs detroit axle: aerial shot of a winding path through a forest surrounded by water

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Nissan Altima with a worn front hub usually starts with a low hum around 40 mph that grows louder in long sweeping turns. Price the part online and the choice narrows fast to timken vs detroit axle: one is a century-old bearing name sold one hub at a time, the other is a Michigan parts brand that often ships both sides in a single box.

To keep this fair, every part below is a front hub assembly for the 2013-2018 Altima, the same 4-bolt unit that the Maxima, Murano and Pathfinder of those years share. The specs come only from each Amazon US listing and the makers’ own pages. For a wider look at more names, see our guide to wheel hub assembly brands and their part numbers.

Quick answer

Should a 2013-2018 Altima get a Timken or a Detroit Axle front hub?

Choose Timken if you plan to keep the car for years and want a bearing specialist’s part that lists the Nissan numbers it replaces. Choose the Detroit Axle pair if cost comes first and a 10-year written warranty on both sides appeals. Either way, confirm your engine and year before ordering.

Our Quick Picks

One front hub from each brand for the same 2013-2018 Nissan Altima, plus SKF's BR930745, a number Timken's own listing says its hub replaces. All three are covered in full below.

Timken Front Hub (513296) product photo
Timken pick

Timken Front Hub (513296)

Single front hub, 513296 interchange

Bearing specialist's hub that prints the Nissan numbers it replaces.

SuitsOwners keeping the Altima for years who check part numbers
View on Amazon →
Detroit Axle Front Hub Pair product photo
Detroit Axle pick

Detroit Axle Front Hub Pair

Front pair, 5-lug, encoder ABS

Both front corners in one order with a long written warranty.

SuitsHigh-mileage Altimas where cost and convenience come first
View on Amazon →
SKF BR930745 Front Hub product photo
Interchange alternative

SKF BR930745 Front Hub

Single front hub, BR930745

The SKF number Timken's listing cross-references, with maker instructions.

SuitsDIY owners who want written install steps from the maker
View on Amazon →

Two Companies, Two Ways of Selling a Hub

Timken built its name on tapered roller bearings and sells hub units to repair shops and parts stores as well as online. Its Amazon listing for this Nissan hub is short on marketing and long on cross-references, printing the two Nissan factory numbers and the common aftermarket numbers it replaces. The engineering claims are brief: an integrated raceway and hub that Timken says is up to 30 percent stiffer than a conventional design.

Detroit Axle is a direct-to-buyer brand, and its company overview page gives a Ferndale, Michigan address on West 8 Mile. The page says its hub assemblies, along with its steering, suspension and brake parts, are manufactured to meet or exceed OEM standards, with fitment accuracy as a stated aim. On Amazon it tends to sell hubs in pairs and kits, which is how most Altima owners meet the brand.

What the Altima front hub actually does

On the 2013-2018 Altima, the front bearing is sealed inside a hub assembly that bolts to the steering knuckle with four bolts. The drive axle slides through splines in the center and is held by a large axle nut, and the wheel studs are pressed into the hub flange. Nothing inside is serviceable, so when the bearing gets loud or loose, the whole unit is replaced.

The hub also carries part of the ABS system. A magnetic encoder ring is built into the bearing seal, and the wheel speed sensor in the knuckle reads it to tell the ABS and stability control how fast that wheel is turning. A hub with the wrong encoder, or one with metal debris stuck to the ring, can switch on the ABS warning even though the bearing itself is fine.

Timken vs Detroit Axle on the Listing Sheet

The table below uses only what each Amazon US listing says for this hub. Where a listing is silent, the cell says so rather than filling the gap with a guess.

PointTimken (one hub)Detroit Axle (front pair)
In the box1 preset, pre-greased, pre-sealed hub2 front hub assemblies, left and right
Vehicles namedNone in the title; lists Nissan 40202-JA100 and 40202-ZX10A2013-2018 Altima, 2007-2012 Altima 3.5L, Maxima, Murano, Pathfinder, Quest, QX60
Cross-references printed513296, BR930745 and othersNot listed
Hub detailsIntegrated raceway, narrow package5 lugs, encoder ABS, 4-bolt square flange
Testing claimNot statedImpact, wear and fatigue testing
Warranty in listingNot stated10-year warranty
Timken vs Detroit Axle front hub assemblies for the 2013-2018 Nissan Altima, from their Amazon US listings

The two listings answer different questions. Timken tells you exactly which factory and aftermarket parts its hub replaces, while Detroit Axle tells you which cars it fits and what warranty it carries. Neither page publishes load ratings, seal design or bearing country of origin, so treat claims beyond the table with caution.

Timken vs Detroit Axle Hubs Side by Side, Plus One More

The Timken and SKF parts are sold one per box, while the Detroit Axle listing covers both front corners. Use Amazon’s fit checker with your exact year, engine and trim, because the 2007-2012 Altima with the 2.5-liter four-cylinder takes a different front hub.

Timken Front Wheel Hub Assembly: Preset, Pre-Greased Unit Replacing Nissan 40202-JA100 and 513296

Timken Front Hub (513296) product photo
Key features
  • Preset, pre-greased and pre-sealed hub unit
  • Replaces Nissan 40202JA100 and 40202ZX10A
  • Cross-references 513296 and BR930745
  • Integrated raceway, up to 30 percent stiffer

This Timken listing is a single front wheel hub and bearing assembly, sold preset, pre-greased and pre-sealed so it goes on as one unit. The title does not name vehicles. Instead it prints the parts it replaces: Nissan factory numbers 40202JA100 and 40202ZX10A, plus the aftermarket interchange numbers 513296 and BR930745 that cover the 2013-2018 Altima front. Match those numbers against your old hub or the fit checker before you buy.

Timken’s feature notes focus on the bearing design. The listing says the integrated raceway and hub increase stiffness by as much as 30 percent over conventional bearing systems. It also says the narrow package width and reduced radial section lower unsprung weight, which Timken links to better handling and fuel efficiency. As with any sealed hub, nothing inside needs grease or adjustment during its life.

The listing does not state a warranty term, the bearing origin or what hardware comes in the box, so check the packaging and plan on a new axle nut if your service manual calls for one. Because it is sold singly, a matched front pair means ordering two. It suits owners who want an established bearing maker on a car they plan to keep.

View Timken Front Hub (513296) on Amazon

lone motorcyclist traverses the sandy dunes of Huarmey

Detroit Axle Front Wheel Bearing Hub Pair: 5-Lug Encoder ABS Assemblies for 2013-2018 Nissan Altima

Detroit Axle Front Hub Pair product photo
Key features
  • Two front hub assemblies, left and right
  • Lists 2013-2018 Altima and 2007-2012 Altima 3.5L
  • 5 lugs, encoder ABS, 4-bolt square flange
  • Impact, wear and fatigue tested, 10-year warranty

Detroit Axle sells this listing as a pair of front wheel bearing and hub assemblies, one for each side. The fitment line is long: 2013-2018 Nissan Altima, 2007-2012 Altima with the 3.5-liter engine, 2009-2023 Maxima, 2009-2019 Murano, 2013-2020 Pathfinder and 2011-2017 Quest, plus the Infiniti JX35, QX60 and QX50 of certain years. Confirm your year, engine and trim with the fit checker, since the four-cylinder 2007-2012 Altima is not on the list.

The listing gives the basic hub specifications plainly: front left and right position, five lugs, an encoder-type ABS ring and a 4-bolt square flange. Detroit Axle says its products go through impact, wear and fatigue testing to help ensure durability, and the pair is covered by a 10-year warranty. It does not publish bearing load ratings, seal design or interchange numbers, so compare the new part with your old one before fitting.

Buying both sides at once suits an older, high-mileage Altima where the second hub is likely close behind the first. It keeps the front axle matched and saves a second order. It is a less natural fit for owners who want printed cross-references, and you will still need a new axle nut and a torque wrench for the job.

View Detroit Axle Front Hub Pair on Amazon

SKF BR930745 Front Wheel Hub Bearing Assembly: Complete Replacement Kit for Nissan and Infiniti

SKF BR930745 Front Hub product photo
Key features
  • BR930745 front wheel hub bearing assembly
  • Listed for Nissan 2007-2023 and Infiniti 2013-2021
  • Includes components for a complete replacement
  • QR code links to SKF install instructions

SKF’s BR930745 is the third option here because Timken’s own listing names it among the parts its hub replaces, which makes it a direct alternative on the same Altima front corner. SKF lists the assembly as compatible with a broad range of Nissan models from 2007 to 2023 and Infiniti models from 2013 to 2021. That range is wide, so enter your exact year, engine and trim in the fit checker before ordering.

The listing says the box includes all the components needed for a complete wheel bearing replacement. A QR code on the box label links to SKF’s instructions and more detailed technical information, which is useful if you are doing the job at home for the first time. SKF also states that the part meets or exceeds all OE specifications.

SKF is direct about the work involved. The listing says the part must be installed by a knowledgeable mechanic using the correct tooling, following SKF’s instructions and the vehicle’s own procedure. It is sold as a single hub, and no warranty term appears in the listing bullets, so check the packaging. It suits owners who value maker instructions and a part number they can cross-check with Timken.

View SKF BR930745 Front Hub on Amazon

vibrant red rock formations next to an open road under a clear blue sky

Matching the Hub to How Long You Will Keep the Car

Most Altima owners shopping for a hub are not chasing performance. They want the hum gone, the ABS light off and the car to pass its next inspection, and the number of years left in the car shapes the choice more than the brand name does.

Your situationCloser matchWhy
High-mileage Altima, tight budgetDetroit Axle pairBoth sides in one order with a 10-year written term
Keeping the car for many more yearsTimkenBearing specialist that prints the Nissan numbers it replaces
You want the number Timken cross-referencesSKF BR930745Same interchange, with maker instructions by QR code
Only one side is noisyAny, but inspect bothThe other side has seen the same miles and salt
ABS light came on with the noiseDiagnose firstA sensor or wiring fault can mimic a hub problem
Choosing between Timken, Detroit Axle and SKF front hubs for a 2013-2018 Nissan Altima

Forum threads on both brands run from happy owners to frustrated ones, and the complaints about budget hubs tend to center on noise returning sooner than expected. Those stories are not measured data. They are a good reason to look the new part over before it goes on, spin it by hand and check that the flange runs true.

drone view of snowy road and rail line alongside a frozen lake during sunset

If only one side hums, there is no rule that says you must replace both. Still, the opposite hub has covered the same miles through the same winters, so many owners choose the pair to avoid a second job a few months later. A Detroit Axle pair makes that choice easy, while Timken means buying two boxes.

Fitting a Bolt-On Hub: Axle Nut, Sensor and Torque

Because the Altima front hub bolts to the knuckle, the job does not need a hydraulic press. Many other cars use a press-in bearing that has to be pushed out of the knuckle and a new one pushed in, which calls for the right adapters; our wheel bearing press kit guide covers that style. On this Nissan the work is mostly unbolting, cleaning and bolting back together.

With the car on stands and the wheel off, the caliper and its bracket come off first and get hung from the strut, never from the brake hose. The rotor slides off, the axle nut comes loose, and the wheel speed sensor is unplugged or pulled from the knuckle. The four hub bolts are on the back side of the knuckle, and after years of salt the old hub may need persuading to leave its bore.

open highway in a mountain landscape with clear blue sky and clouds

Clean the knuckle face and bore until they are bare metal, then fit the new hub, keeping the encoder ring free of metal shavings. Torque the hub bolts and the axle nut to the values in the Nissan service manual, not to a number from a forum, and use a new axle nut if the manual calls for one. Finish by torquing the lug nuts in a star pattern; our lug nut torque wrench roundup explains why an impact gun alone is the wrong tool.

Salt, Potholes and Grand Rapids Hubs

Front hubs on a front-wheel-drive sedan carry braking, steering and drive loads at once, and West Michigan adds two more stresses. Freeze-thaw potholes hit the bearing with sharp impacts every spring, and road salt works on the seal and the joint between hub and knuckle all winter. Our article on how long wheel bearings last explains why the same part can run far longer in a dry climate.

Salt also makes the swap harder. The hub can rust into the knuckle, and the brake bracket bolts and sensor can seize in place. Soak the hardware with penetrating oil the night before, and budget for a new wheel speed sensor in case the old one snaps on the way out.

lone rider on a foggy highway winding through a serene forest at dawn

Once the new hub is in, a smear of anti-seize where the hub pilot meets the knuckle, if the service manual allows it, can make the next replacement easier. Listen for new noises at each seasonal tire change, and grab the top and bottom of each tire to feel for play while the car is in the air.

When the Hub Job Belongs at a Shop

Not sure the hub is the source? A growl that changes as you swerve left and right points to a bearing, while a rhythmic thump can be a tire. Our guide to wheel bearing noise symptoms walks through the tests, and if the dash shows a warning, our page on why the ABS light is on covers sensor faults that look like hub trouble.

A hub rusted into the knuckle, a stripped axle nut or no torque wrench big enough for the axle nut are all good reasons to bring the car in. We do wheel bearing replacement in Grand Rapids on foreign and domestic vehicles. Hendrick Hoffman holds ASE and State of Michigan certification in steering and suspension as well as brakes, both of which this job touches.

Frequently Asked Questions

Is Detroit Axle as good as Timken for wheel hubs?

For timken vs detroit axle there is no published test that settles it. Timken is a long-standing bearing maker that lists the Nissan numbers its hub replaces, while Detroit Axle lists fatigue testing and a 10-year warranty. Owners keeping a car for many years often lean to Timken; budget repairs lean to Detroit Axle.

Do I need a press to replace a 2013-2018 Altima front hub?

No. The front hub on these cars is a bolt-on assembly held to the knuckle by four bolts, so a press is not needed. You do need a breaker bar or large socket for the axle nut and a torque wrench to tighten it to the service manual value.

Will these hubs fit a 2010 Altima?

Only some versions. The Detroit Axle listing names the 2007-2012 Altima with the 3.5-liter V6, while the 2.5-liter cars of those years use a different front hub. Check your engine size and confirm the listing with Amazon’s fit checker before you order.

Why is my ABS light on after replacing a hub?

The most common causes are a sensor that was damaged or not fully seated, a connector left unplugged, or debris on the hub’s magnetic encoder ring. A hub with the wrong encoder type can also trigger it. An ABS-capable scan tool can tell you which wheel’s sensor is complaining.

Front end humming on your Altima, or any car, around Grand Rapids? Call 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or request a wheel bearing check on our contact page.

Tied up at work during our hours? Drop the car at 456 Carrier St NE once we have closed, use the after-hours drop-off, and leave a note saying which side is making the noise.