As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The 6.7L Power Stroke has been under the hood of Ford Super Duty trucks since the 2011 model year, and it has used the same oil filter family the whole time. The best oil filter for Ford 6.7 diesel engines is one built to the Motorcraft number, with the same thread, gasket and valve settings as the part Ford designed the engine around.
Below we cover the factory number, what a diesel filter has to cope with, and six filters for an F-250, F-350 or larger truck. For a wider look at spin-on filters from the big makers, see our comparison of the best oil filter brand for everyday cars and trucks.
Quick answer
What oil filter does the 6.7 Power Stroke use?
Ford’s current part is the Motorcraft FL-2124-S, which replaces the original FL-2051-S on 2011 and newer 6.7L Super Duty trucks. Common crosses include the WIX 57151XP, Baldwin B7379 and Fleetguard LF17494. Check the number on your old filter and confirm your truck with Amazon’s fit checker before ordering.
Our Quick Picks
Three quick picks: the current Motorcraft number, a synthetic-media cross for extended intervals, and a magnetic filter for hard-working trucks. All six filters are reviewed below.

Motorcraft FL-2124-S
The current Motorcraft part that replaces the original FL-2051-S on 6.7L trucks.

WIX 57151XP
A WIX XP cross built for synthetic oil and long service intervals.

PPE High-Efficiency Oil Filter
A premium filter with a built-in magnet for trucks that tow or idle a lot.
One Filter Family Since 2011
Early 6.7L trucks left the factory with the Motorcraft FL-2051-S, Ford number BC3Z-6731-B. Motorcraft later moved to FL-2124-S, and its listing says plainly that the newer number supersedes the old ones. If your receipts or your old filter say FL-2051-S, you are shopping for the same family.
The aftermarket crosses line up the same way. The WIX, Baldwin, Fleetguard and Doc’s Diesel listings all point back to that Motorcraft part, so a 2012 F-250 and a 2022 F-350 usually take filters from one shelf.
- Look at the can: the part number printed on the filter you remove is the surest match.
- Check the engine, not the badge: an F-150, a 5.0L or the 7.3L gas V8 in later Super Duty trucks uses a different filter entirely.
- Check fitment: give Amazon your 6.7 diesel truck’s year, model and engine first.
What the Filter Has to Handle on a Power Stroke
A diesel makes soot as part of normal combustion, and some of it ends up in the oil along with dust and fine wear metal. The filter’s job is to hold that debris away from the bearings, cam and turbocharger while still letting plenty of oil through on a cold start.
Two small valves inside the can matter as much as the media. An anti-drainback valve keeps oil from running out of the filter when the engine is off, so pressure comes up quickly at the next start. The bypass valve opens if the media clogs or the oil is thick, sending unfiltered oil to the engine rather than none at all. Premium filters often add a magnet or finer media, and their micron claims are each maker’s own figures.
Best Oil Filter for Ford 6.7 Diesel: Six Filters Reviewed
Fit notes come straight from each Amazon listing, and the years they name are not a full fit list. Run the Power Stroke through Amazon’s fit checker with year, model and engine before this one goes in the cart.
1. Motorcraft FL-2124-S: Factory Oil Filter for 2011-2026 Super Duty, Replaces FL-2051-S

- Ford's own parts brand
- Supersedes FL-2051-S and BC3Z-6731-B
- Listed for 2011-2026 F-250 to F-450 Super Duty
- Element and gasket kit, one filter
Motorcraft is Ford’s own parts brand, and the FL-2124-S is the number it now sells for Super Duty trucks with the 6.7L diesel. The listing states that it supersedes FL-2051-S, FL-2051 and the Ford numbers BC3Z-6731-A and BC3Z-6731-B, with interchange number MU2Z-6731-C. It comes as an element and gasket kit, one filter per box.
The application list on the listing runs from 2011 to 2026 for the F-250, F-350 and F-450 Super Duty, 2011 to 2025 for the F-550, 2021 to 2025 for the F-600, and the F-650 and F-750 for 2016 to 2019 and 2021 to 2026. The crosses below all describe themselves as replacements for it, so buying the Motorcraft part removes any doubt about thread size, gasket diameter or bypass setting.
This filter suits owners who keep records by Ford number, and anyone who wants the part the engine left the factory with. It offers no magnet or special media claims, and a single box means buying again at each change. As always, match the number on your old filter or check year, model and engine with Amazon’s fit checker before ordering.
View Motorcraft FL-2124-S on Amazon
2. WIX XP 57151XP: Synthetic-Media Oil Filter for Ford Super Duty 6.7L Diesel

- Listed for Super Duty 6.7L diesel, 2011-2014
- Synthetic-blended media, no wire backing
- 99% at 23 microns (maker figure, based on 51515XP)
- Up to 20,000-mile intervals (maker claim)
The WIX 57151XP is the XP version of the WIX filter that crosses to the Motorcraft FL-2051-S family. Its listing names Ford F-Series Super Duty pickups with the 6.7L diesel from 2011 to 2014. XP is the WIX line made for synthetic oil, and the listing says it is meant for severe use such as towing, stop-and-go driving and long highway runs.
Inside, WIX uses a synthetic-blended media with natural fibers, which it says removes the need for a wire backing. The maker rates it at 99 percent efficiency at 23 microns, a figure it notes is based on testing of the 51515XP. WIX also claims change intervals of up to 20,000 miles, but your truck’s oil life monitor and Ford’s schedule decide when the oil actually comes out, not the filter box.
This filter fits owners who already run a synthetic diesel oil. The listing title only names 2011 to 2014 trucks, so owners of later Super Duty models should run their truck through the part finder before assuming a match. It is sold as a single filter. Check the fit by entering your year, model and engine on Amazon first.

3. Fleetguard LF17494: Cummins Filtration Lube Filter for Ford 6.7L V8 Turbo Diesel

- Made by Cummins Filtration
- Listed for the Ford V8 406 6.7L turbo diesel
- Spin-on lube filter
- Crossed by Baldwin and other listings to the 6.7L
Fleetguard is the filter brand of Cummins Filtration, a name better known in big rigs, buses and equipment than on parts store shelves. The LF17494 listing describes it as an oil filter for the Ford V8 406 6.7L FI turbo diesel, which is the Power Stroke engine. It is a spin-on lube filter sold as a single unit.
The listing itself is brief and gives no media type, micron rating or valve details, so there is little to compare on paper. What it does have is wide cross-reference support. The Baldwin B7379 listing names LF17494 as one of the filters it replaces, and several other 6.7L filter listings print the same number, which places it squarely in the Motorcraft FL-2051-S family that the engine was built around.
This filter makes sense for owners who already buy heavy-duty brands for other equipment, or for anyone who finds it easily through a truck parts supplier. Shoppers who want published efficiency figures will find more detail on the WIX, Doc’s Diesel and PPE listings. Because the listing names the engine rather than specific truck years, confirm your year, model and engine with Amazon’s fit checker before ordering.
View Fleetguard LF17494 on Amazon
4. Baldwin B7379: Spin-On Oil Filter 6-Pack for Ford Super Duty Diesel Trucks

- Six genuine Baldwin B7379 filters
- About 3 11/16 in wide and 6 13/16 in long
- Replaces WIX 57151, Fleetguard LF17494, FRAM PH8977
- Bulk pack for fleets and repeat changes
Baldwin is a heavy-duty filter maker with a long history in commercial trucks, and the B7379 is its spin-on oil filter that crosses to the 6.7L Power Stroke family. This listing sells six genuine B7379 filters in one order. It gives the size as roughly 3 11/16 inches across and 6 13/16 inches long.
The cross-reference on the listing covers WIX 57151 and 57151XP, Fleetguard LF17494 and FRAM PH8977, and the Doc’s Diesel 6.7L listing names the B7379 as one of its crosses as well. The listing describes the fit as Ford Super Duty trucks and other heavy-duty diesel platforms. It also asks buyers to verify engine fitment, which is good advice since Super Duty trucks have come with gas engines too.
A six-pack suits anyone running more than one diesel truck, a small fleet, or an owner who changes oil often while towing and wants filters on the shelf. It is more than a one-time buyer needs, and the listing does not state media or micron details. Before buying, confirm your year, model and engine with Amazon’s fit checker and compare the number with your old filter.
View Baldwin B7379 6-Pack on Amazon

5. Doc’s Diesel 6.7L Power Stroke Oil Filter: 25 Micron Rated, 2011-2026 F-250 to F-550

- Listed for 2011-2026 F-250 to F-550
- 25 micron at 99% (third-party test, per listing)
- Replaces FL2051, WIX 57151 and Baldwin B7379
- Works with synthetic, conventional or blend oil
Doc’s Diesel sells filters made for diesel pickups, and this one is listed specifically for the 6.7L Power Stroke. The listing names the 2011 to 2026 Ford F-250, F-350, F-450 and F-550, plus the F-650 and F-750 from 2017 to 2026. It says the filter replaces the Motorcraft FL2051, WIX 57151 and Baldwin B7379, so it sits in the same family as everything else here.
The maker states it was third-party tested to 25 microns at 99 percent efficiency, and that it was also checked for capacity and burst strength. The listing describes a heavy-duty metal housing and high-flow media meant to keep oil moving on cold mornings. It works with synthetic, conventional or blended oils, and it spins on with an ordinary filter wrench during a normal change.
This filter suits owners of later trucks who want a listing that names their model year outright, since the WIX title stops at 2014. The listing suggests change intervals, but your oil life monitor and Ford’s schedule should come first. It is sold as a single filter and has no magnet. Check this listing against your Power Stroke’s year and engine in the fit checker first.
View Doc's Diesel 6.7L Oil Filter on Amazon
6. PPE Premium High-Efficiency Oil Filter: 5 Micron with Magnet for 2011-2024 6.7L Power Stroke

- Listed for 2011-2024 Super Duty 6.7L Power Stroke
- 5 micron nominal rating
- Integrated neodymium magnet
- Sold individually
Pacific Performance Engineering, usually shortened to PPE, builds aftermarket parts for diesel trucks, and this premium filter is listed for 2011 to 2024 Ford Super Duty trucks with the 6.7L Power Stroke. It is sold individually. Of the six filters here, it is the one aimed most clearly at owners who want something beyond a factory-equivalent part.
The listing gives two main features: a 5 micron nominal rating and an integrated neodymium magnet. The magnet is there to hold fine steel particles that the media alone may let through, and the nominal rating points to finer filtration than the factory-style filters claim. Keep in mind that nominal and absolute micron ratings are measured differently, so the number is best read as the maker’s own description rather than a direct comparison.
This filter suits trucks that tow heavy, pull campers through the summer or sit idling on job sites, where owners like the idea of extra protection. It does not replace a sensible change schedule. The listing stops at 2024, so newer trucks should be checked carefully. Let Amazon’s fit checker confirm the Power Stroke match before you buy this filter.
View PPE High-Efficiency Oil Filter on Amazon
Cross-Reference at a Glance
Match this table against the filter already on your engine. If you own a Super Duty and you came here for the best oil filter for Ford F250 6.7 diesel trucks, the same rows apply.
| Filter | Fit named on the listing | Number it lines up with | Pack |
|---|---|---|---|
| Motorcraft FL-2124-S | 2011-2026 F-250 to F-450 Super Duty | Supersedes FL-2051-S | 1 filter |
| WIX 57151XP | Super Duty 6.7L diesel, 2011-2014 | FL-2051-S family | 1 filter |
| Fleetguard LF17494 | Ford 6.7L turbo diesel V8 | FL-2051-S family | 1 filter |
| Baldwin B7379 | Ford Super Duty (verify engine) | Crosses WIX 57151, LF17494 | 6 filters |
| Doc’s Diesel 6.7L | 2011-2026 F-250 to F-550 | Replaces FL2051, B7379 | 1 filter |
| PPE High-Efficiency | 2011-2024 Super Duty 6.7L | FL-2051-S family | 1 filter |
When several filters suit your truck, let its work decide. A Motorcraft or WIX filter fits a daily driver, heavy towing favors a magnet and finer media, and fleets may prefer a bulk pack. Whichever way you lean, the best oil filter for Ford 6.7 diesel use is still one that matches the number on your old can.

Service Notes for Super Duty Owners
Ford’s oil life monitor tracks how the engine is actually used, so treat it and the owner’s manual as your schedule. Towing, extended idling and short trips in the cold shorten the interval, and our article on how often to change oil walks through the situations that call for an earlier change. Fill with the grade your manual lists; the US Department of Energy’s vehicle maintenance tips on fueleconomy.gov make the same point about sticking to the recommended grade.
On this engine the oil filter sits on top, so some oil runs down when you loosen it. Have rags ready, lightly oil the new gasket, and tighten it the way the filter’s instructions say rather than by feel.

The fuel filters are a separate service on every 6.7L, with their own water separator and their own Ford interval. Changing the oil filter does nothing for them.
Grand Rapids winters ask more of a diesel. Single-digit starts make the oil sluggish, so many owners plug in overnight; our guide to the best engine block heater for diesel trucks compares the options. The grade matters too, and our look at the best motor oil for cold weather explains what the winter numbers on the bottle mean.
Signs the Truck Needs a Shop

A few signs call for a closer look. An oil pressure warning, wet spots around the filter housing, an oil level that climbs between changes or a check engine light all deserve attention before the next long tow. A code reader is a sensible first step, and our guide to the best scan tool for Ford trucks and cars covers the tools that read Ford systems.
If you would rather not crawl around a tall truck with a drain pan, book our oil change service in Creston, which handles diesel pickups as well as cars.
More Buying Guides
Frequently Asked Questions
Is the FL-2124-S the same as the FL-2051-S?
For buying purposes, yes. Motorcraft lists the FL-2124-S as the replacement for the FL-2051-S and the older Ford numbers on 2011 and newer 6.7L Super Duty trucks. If you find either number on the old filter, the newer part is the one Motorcraft sells today.
Did the oil filter change on 2017 or 2020 Super Duty trucks?
Not according to the Motorcraft listing, which covers 2011 through 2026 F-250, F-350 and F-450 trucks with one part. The fuel filters are a different story, so do not assume a fuel filter for one year fits another.
Does an F-150 or the 7.3L gas engine use the same filter?
No. The F-150 engines and the 7.3L gas V8 take smaller filters with different numbers. This guide covers only the 6.7L Power Stroke diesel, so match the filter to the engine under your hood.
Want the oil change off your list this week? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a Power Stroke oil service on our contact page.
Can’t spare the truck during business hours? Drive it over to 456 Carrier St NE after work and use the after-hours drop-off, and we’ll take it from there.
