As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
An Accord with tired dampers floats over highway seams, thumps through potholes and leans more than it used to on a freeway ramp. Choosing the best struts for Honda Accord sedans and coupes starts with two facts: the generation of your car and which corner you are fixing.
This guide sorts six listings for the 2008 to 2012 and 2013 to 2017 cars by front or rear position, loaded or bare. If you are still deciding whether the struts are the problem at all, start with our checklist on how to tell if struts are bad.
Quick answer
Which struts should go on a worn Honda Accord?
Match the listing to your model year, body style, engine and corner. For most owners, a loaded Monroe Quick-Strut is the simplest front repair on a 2013 to 2017 or a 2008 to 2012 car. If your springs are still healthy and you can compress them safely, a bare KYB Excel-G costs less per corner.
Our Quick Picks
Three quick picks: a loaded Monroe front corner for the 2013 to 2017 car, a loaded Monroe front left for 2008 to 2012 and a bare KYB Excel-G front strut for owners keeping good springs. All six listings are reviewed below.

Monroe Quick-Strut 272971
A complete front corner that renews the mount and spring with the damper.

Monroe Quick-Strut 172562L
A bolt-in front corner for the eighth-generation car.

KYB Excel-G 340030
An OE-style gas damper for cars whose springs are still good.
What Sits at Each Corner of an Accord
Honda changed the Accord’s front suspension twice in twenty years, so the word “strut” does not mean the same part on every car. Parts catalogs use it for any coilover damper.
- 2003 to 2012: a double wishbone front end with a coil spring wrapped around the damper. Catalogs still sell that unit as a front strut.
- 2013 to 2017: MacPherson struts up front, with a multi-link rear that also uses a coilover damper at each wheel.
- 2018 to 2022: MacPherson front struts again, but Touring trims carry adaptive dampers that standard replacement parts exclude.
Inside one generation, the 4-cylinder and V6 cars often use different springs, and coupes can differ from sedans. Monroe states on its Quick-Strut assembly page that each coil spring type is based on model and engine size, so two listings for the same year may not swap.
Loaded Assembly or Bare Damper: Deciding Before You Order
A loaded strut, sometimes sold as a quick strut or complete corner, arrives with the damper, spring, insulators and top mount already bolted together. You swap the whole unit, so the job needs ordinary hand tools and no spring work. It also renews the mount, often the true source of a clunk.
A bare strut is only the damper. The old spring and mount have to be compressed, removed and fitted to the new body, so read our guide to coil spring compressors for strut work before you plan on doing that in the driveway. Bare parts make sense when the springs still hold the car at its normal height and the mounts are quiet.
Whichever type you choose, buy the matching opposite side as well. Many listings cover a single corner and name it with an L or R, so a pair means two separate part numbers.
Best Struts for Honda Accord: Six Listings by Year and Corner
Each listing below names the Accord years it is sold for, and none of them fits every version of the car. Enter your year, body style, engine and trim in Amazon’s fit checker before ordering, and replace dampers as an axle pair.
1. Monroe Quick-Strut 272971: Loaded Front Strut and Coil Spring Assembly for 2013-2017 Accord

- Listed for 2013-2017 Honda Accord
- Strut, spring and upper mount preassembled
- No spring compressor needed
- Salt spray tested protective coating
The Monroe Quick-Strut 272971 is a complete front corner sold for the 2013 to 2017 Honda Accord, the first generation of the car with MacPherson struts up front. Monroe offers the 272970 as its companion number, so expect to buy both parts to cover the left and right sides. The Amazon title does not spell out the side, which makes the fit notes the place to confirm the corner, body style and engine before you order.
Every unit comes with the strut, an application-specific coil spring and a premium upper mount already assembled. Monroe says the spring is calibrated to the original design to bring back factory ride height, while the new mount is meant to cut noise, vibration and memory steer. The steel is coated against rust and checked with salt spray testing, a useful detail for a car that lives on salted winter roads.
Because the spring stays captive in the assembly, you unbolt the old strut at the top mount and the knuckle, then fit the new unit without a compressor. That suits an owner whose Accord has a tired top mount, a sagging corner or simply high mileage. It is not aimed at lowering the car or at anyone after a sportier, firmer ride.
View Monroe Quick-Strut 272971 on Amazon
2. Unity 11217: Front Left Complete Strut Assembly for 2013-2017 Accord

- Listed for 2013-2017 Honda Accord, front left
- Top mount, bearing plate, bumper and spring included
- Restores factory ride height
- No specialty tools required
Unity Automotive’s 11217 is a front left complete strut assembly for the 2013 to 2017 Accord, which puts it on the driver side of a US car. The matching passenger side is the 11218, so a front axle job means ordering both numbers. As with any Accord strut, check that the listing covers your engine and body style, since the 4-cylinder, V6, sedan and coupe do not all share springs.
The assembly arrives with the strut, coil spring, top mount, bearing plate, bump stop and insulators already put together. Unity says it is built to restore factory ride height and give a stable, comfortable ride, and that it is engineered for a direct fit. Replacing the bearing plate and insulators at the same time removes two common sources of creaks and steering notchiness on an older car.
This is a plain, stock-feel replacement for a commuter Accord that has started to float or knock. It needs no spring compressor, only the usual hand tools, a jack and stands and some penetrating oil for rusty bolts. It is not a performance upgrade, and owners who want a firmer ride or a lowered stance should look elsewhere.

3. Monroe Quick-Strut 172562L: Front Left Strut and Coil Spring Assembly for 2008-2012 Accord

- Listed for 2008-2012 Honda Accord
- Fully assembled strut, spring and mount
- Spring calibrated to OE ride height
- Coated and salt spray tested
The Monroe Quick-Strut 172562L covers the front left corner of the 2008 to 2012 Accord. On this generation the front is a double wishbone design, and the coilover damper sitting between the arms is the part catalogs call a strut. The L suffix marks the driver side; Monroe sells the right side under its own number, and the listing asks buyers to check the fit notes for engine and trim qualifiers.
The unit combines the damper, an application-specific coil spring and an upper mount in one preassembled piece. Monroe describes the spring as calibrated to the factory design so the car sits at its original height again. The tube and weld design is intended for structural strength, and the coating is salt spray tested to resist corrosion, which matters on a car that may already have a dozen Michigan winters behind it.
With the spring already captive, there is no compressor step, and the job comes down to unbolting the old corner and fitting the new one. It suits an eighth-generation Accord that leans, bottoms out or has a worn mount. It does not suit a lowered car, and coupe owners should confirm the fit closely before buying.
View Monroe Quick-Strut 172562L on Amazon
4. KYB Excel-G 340030: Bare Gas Front Strut for 2008-2012 Accord

- Calibrated for the Honda Accord
- Seamless cylinder with Teflon piston band
- Triple chrome plated piston rod
- Sintered iron rod guide holds alignment
The KYB Excel-G 340030 is a bare gas strut, so it replaces only the damper body and leaves you to reuse the spring and top mount. Its cross-reference list includes Honda part numbers from the 2008 to 2012 Accord front and the Monroe 72562, the bare counterpart of the Quick-Strut above. The title does not say which side it covers, so check whether you need one number for both sides or two, and confirm the fit with your engine and body style.
KYB says this strut is calibrated to bring back the original handling and control of the Accord. Inside, a seamless working cylinder and a Teflon coated piston band help keep a tight seal, while a triple chrome plated rod and multi-lip oil seals are meant to slow wear. A sintered iron rod guide helps the strut hold correct wheel alignment over time.
The trade-off is labor. The old spring must be compressed and moved across, a job that calls for a proper compressor and some care. This part suits an owner, or a shop, refreshing dampers on a car whose springs still hold normal ride height. If the mounts clunk or the springs have sagged, a loaded assembly is the simpler fix.
View KYB Excel-G 340030 on Amazon

5. KYB Strut-Plus SR4173: Rear Complete Corner Assembly for 2008-2012 Accord

- Designed for the Honda Accord
- Replaces Monroe 172563 rear assembly
- Fatigue tested coil spring with coating
- Left and right specific components
KYB’s Strut-Plus SR4173 is a complete corner assembly, and its title lists it as a replacement for Monroe 172563, the rear assembly sold for the 2008 to 2012 Accord. That makes it the rear-axle partner to the front parts above. KYB builds left and right specific parts, so read the listing and fit notes closely, confirm the side, sedan or coupe body and engine, and order the other side to match.
Each Strut-Plus unit comes preassembled with the damper, coil spring and mount. KYB says it is designed to restore proper ride height and original handling on the Accord, and that the coil spring is fatigue tested and finished with a corrosion resistant coating. The components follow the factory left and right layout, so the car should sit level once both sides are in.
Rear dampers are easy to forget, but a soft back end on an eighth-generation Accord shows up as float over dips, a bouncy feel with passengers and uneven rear tire wear. Because the spring comes installed, this is a bolt-in swap with no compressor. It is a stock replacement, not a lowering or performance part, and it will not suit other generations.
View KYB Strut-Plus SR4173 on Amazon
6. KYB Excel-G 340049: Bare Gas Rear Strut for 2013-2017 Accord

- Calibrated for Honda and Acura models
- Multi-lip oil seals and chrome rod
- Teflon coated piston band
- Vehicle-specific fit
The KYB Excel-G 340049 is a bare gas strut whose cross-reference list includes Honda rear damper numbers used on the 2013 to 2017 Accord, along with several related Acura numbers. KYB describes it as calibrated for Hondas and Acuras rather than naming one model, so run your year, body style and engine through the Amazon fit checker before ordering. Plan on two units, one for each rear corner.
Like the front Excel-G, it uses a seamless working cylinder and a Teflon coated piston band to keep the seal tight. A triple chrome plated piston rod and multi-lip oil seals are there to reduce wear, and a sintered iron rod guide helps keep the wheel aligned. KYB says the damping is set to restore the car’s original handling and control.
This is a damper only, so the existing rear spring and mount have to be compressed and transferred. That suits a shop or an experienced home mechanic replacing leaking or soft rear dampers on a ninth-generation car whose springs are still at height. If the rear sits low or the mounts are cracked, a complete rear assembly saves time and reuses nothing worn.
View KYB Excel-G 340049 on Amazon
Which Listing Lines Up With Your Accord
This table narrows the best struts for Honda Accord owners to one or two numbers; confirm the part against your VIN.
| Your Accord and job | Listing to check | Type | Watch for |
|---|---|---|---|
| 2013 to 2017, front, worn mounts or sagging | Monroe Quick-Strut 272971 | Loaded | One corner per box; order the opposite side |
| 2013 to 2017, front left, plain refresh | Unity 11217 | Loaded | Right side is a separate number |
| 2008 to 2012, front left | Monroe Quick-Strut 172562L | Loaded | Check engine and body style notes |
| 2008 to 2012, front, springs still good | KYB Excel-G 340030 | Bare | Needs a spring transfer |
| 2008 to 2012, rear | KYB Strut-Plus SR4173 | Loaded | Left and right specific parts |
| 2013 to 2017, rear, springs still good | KYB Excel-G 340049 | Bare | Confirm sedan or coupe fit |

A noise is not always a strut. A chirp or creak over speed bumps often comes from a dry sway bar bushing or a worn end link, and our article on why a car squeaks when going over bumps helps you rule those out first. Owners of other Honda models will find more choices in our roundup of struts across the Honda lineup.
Salt, Frost Heaves and an Aging Accord in West Michigan
Freeze-thaw cycles open Grand Rapids potholes every spring, and road salt works into the strut bodies and lower bolts of an older car, so soak those bolts with penetrating oil a day before the job.
Watch for a car that keeps bouncing after a dip, a nose that dives hard under braking, cupped tire tread and oily streaks running down a damper body. Rattles from the top of the front strut tower on a 2013 to 2017 car usually point to a tired mount, which favors a loaded assembly over a bare one.

Doing the Swap Yourself or Handing It Over
A loaded strut on an Accord is a reasonable job for a careful home mechanic with jack stands, a torque wrench and a free afternoon. Bare struts add the spring step, and a compressed coil can do real harm if a tool slips, so let a shop handle that part if you have any doubt.
Plan on a wheel alignment afterward, whichever of the best struts for Honda Accord cars you install. New front struts shift camber and toe slightly, and an Accord left out of spec wears the inner tire edges and can drift on the highway. For a wider look at ride-control parts on commuter cars, see our guide to shocks and struts for daily drivers.

If you would rather have it done, our suspension repair service in Grand Rapids covers struts, shocks, mounts and the steering parts around them. Hendrick Hoffman, who owns the shop and works on the cars himself, is ASE and State of Michigan certified in steering and suspension; his background is on our about us page.
More Buying Guides
Frequently Asked Questions
Should I replace all four Accord struts at once?
Always replace them as an axle pair. Doing all four makes sense when the rear dampers have the same mileage and show the same signs, because fresh fronts on a soft rear end can leave the back of the car bouncing.
Do 4-cylinder and V6 Accords use the same struts?
Often not. The V6 is heavier at the front, so many generations use different springs or complete assemblies by engine. Pick a listing that names your engine, or confirm it in the fit notes.
Can a 2018 Accord Touring use regular replacement struts?
Touring trims from 2018 on have adaptive dampers wired to the car, and standard struts usually exclude them. Check that a listing names adaptive damper models before buying, or ask a shop to price the factory part.
Is an alignment really needed after new struts?
Yes. Removing the strut changes how the knuckle sits, even with careful marking, and a small toe error wears tires quickly. Book the alignment as soon as the new parts are in.
Does your Accord bounce, wander or knock over Grand Rapids potholes? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a suspension inspection through our contact page.
Working during our hours? Park the car at 456 Carrier St NE when you are done for the day and leave the keys with our after-hours drop-off.
