As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Grand Cherokee with tired front struts tends to float after a dip, dip its nose under braking and thump over broken pavement. The best struts for Jeep Grand Cherokee models are the ones built for your generation, engine and suspension type, because a 2008 WK and a 2018 WK2 share almost nothing up front.
This guide sorts front strut listings for the 2005 to 2010 WK and the 2011 to 2021 WK2, from factory-style corners to a mild lift and a firmer monotube set. Driving a sedan or a smaller crossover instead? Start with our roundup of shocks and struts for daily drivers.
Quick answer
Which front struts suit a Grand Cherokee?
Match the strut to your generation and confirm the Jeep has steel coil springs, not Quadra-Lift air. A loaded Monroe Quick-Strut restores a 2011 to 2015 WK2, a Detroit Axle pair covers 2016 to 2020 on a budget, and a Bilstein 5100 set firms up and slightly raises a 2005 to 2010 WK.
Our Quick Picks
Three quick picks: a loaded Monroe for a 2011 to 2015 WK2, a Detroit Axle pair for 2016 to 2020 and a Bilstein 5100 set for the 2005 to 2010 WK. All six listings are reviewed below.

Monroe Quick-Strut 272546L
A complete bolt-in corner that renews the spring and mount as well.

Detroit Axle Front Strut Pair
Both front corners in one box for a lower-cost refresh.

Bilstein 5100 Shock and Strut Set
Bilstein's 5100 tune with an adjustable front height.
Know Your Grand Cherokee Front End First
Grand Cherokee suspension has changed across five generations, and that decides whether you need struts at all.
- 1993 to 2004 (ZJ and WJ): solid axles front and rear with separate coil springs and plain shocks. There are no struts on these Jeeps, so our guide to shocks for Jeep models is the right page.
- 2005 to 2010 (WK): independent front suspension with a coilover strut at each front wheel, and a solid rear axle with shocks.
- 2011 to 2021 (WK2): independent at both ends, with front struts and separate rear shocks on coil-spring trims. Many upper trims carry Quadra-Lift air suspension instead.
- 2022 and later (WL): few branded aftermarket struts are listed yet.
Two more exclusions matter. SRT, SRT8 and Trackhawk models use their own adaptive dampers, and Jeeps with Quadra-Lift need air struts, not the coil-spring assemblies below. Look in the wheel well: a coil spring wrapped around the strut means these listings apply.
Loaded Corner or Bare Strut, Stock or Lifted
Most Grand Cherokee owners do well with a loaded strut, sometimes called a complete or quick strut. It arrives with the damper, coil spring, upper mount and boot already assembled, so the old corner unbolts and the new one goes straight in.
A bare strut is only the damper. Your factory spring has to be compressed and moved across, which takes a proper tool and real care; read our guide to coil spring compressors for strut work before trying it at home. The other choice is height: most listings return the Jeep to factory stance, while lifted struts raise the nose for a little more clearance and larger tires.
Best Struts for Jeep Grand Cherokee: Six Listings by Generation
Each listing names its own years, and none fits every Grand Cherokee. Confirm year, engine and trim in Amazon’s fit checker, and replace struts in pairs.
1. Monroe Quick-Strut 272546L: Loaded Front Strut and Coil Spring Assembly for 2011-2015 Grand Cherokee

- Listed for 2011-2015 Jeep Grand Cherokee
- Strut, spring and upper mount preassembled
- No spring compressor needed
- Salt spray tested protective coating
The Monroe Quick-Strut 272546L is a complete front corner for the 2011 to 2015 Grand Cherokee, and the L suffix marks the driver side. Monroe sells the passenger side as 272546R, so order both and replace them together to keep the front end even. Because WK2 trims differ in suspension type, run your full vehicle details through Amazon’s fit checker and read any qualifier notes first.
Each unit arrives with the strut, an application-specific coil spring and the upper mount already assembled. Monroe says the spring is calibrated to the original design so it restores ride height and carries the Jeep’s weight properly. The premium upper mount is meant to bring back crisp steering and cut noise, vibration and memory steer, and the protective coating has been salt spray tested for wet, salted winters.
The appeal is a simpler job. The spring stays captive inside the assembly, so you remove the old strut and bolt this one in without touching a compressor. It suits a high-mileage WK2 that has started to sag, wander or bounce and needs to go back to stock. It does not fit Quadra-Lift air models, and it will not lift the Jeep.
View Monroe Quick-Strut 272546L on Amazon
2. Unity 4-11213-256500-001: Front Complete Struts and Rear Shocks Kit for 2011-2015 Grand Cherokee

- Listed for 2011-2015 Jeep Grand Cherokee
- Both front strut assemblies included
- Both rear shock absorbers included
- Excludes SRT models
Unity’s 4-11213-256500-001 kit covers all four corners of a 2011 to 2015 Grand Cherokee in one box. It contains driver and passenger front complete strut assemblies plus driver and passenger rear shock absorbers. The listing excludes the SRT, which uses its own adaptive dampers, and owners of air-suspension Jeeps should treat it as unsuitable as well.
The front assemblies follow an OE-style layout, with spring, mount and strut already put together so the corners bolt straight in. Unity says the kit restores factory ride height and gives a stable, comfortable ride, and that it is engineered for a good fit and a trouble-free installation. Replacing the rear shocks at the same time stops tired rear dampers from undoing the work of fresh front struts.
This kit makes the most sense on a WK2 that has covered high mileage on its original suspension, where every damper has worn at roughly the same rate. Buying the whole set at once also saves cross-checking four separate part numbers. It is a stock-height replacement only, so it will not change the stance or suit trail use, and an alignment should follow the install.
View Unity 4-11213-256500-001 Kit on Amazon

3. Rough Country 501064: 2.5-Inch Loaded N3 Lifted Front Struts for 2011-2015 Grand Cherokee

- Listed for 2011-2015 Jeep Grand Cherokee
- Raises the front about 2.5 inches
- Pre-loaded coil for bolt-on fitting
- Limited lifetime replacement warranty
Rough Country’s 501064 is a loaded N3 strut for the 2011 to 2015 Grand Cherokee that lifts the front by about 2.5 inches. It is aimed at coil-spring WK2 owners who want extra ground clearance and space for slightly bigger tires without moving to a full suspension rebuild. Check the listing for quantity, since it is worth knowing whether one box covers one corner or both before you order.
Each strut comes with its coil already installed, so the job is a bolt-on with no spring compressor involved. Rough Country says the ride stays smooth and factory-like despite the added height, and it backs the part with its limited lifetime replacement warranty. The maker also sells a complete 2.5-inch WK2 lift kit, part 91130, that pairs these struts with rear parts so the Jeep stays level.
Lifting only the nose leaves the Jeep tilted, so most owners treat this strut as the front half of that kit. The added height changes camber and toe, which makes an alignment part of the job, and the steering may feel slightly different afterward. It is not for a Quadra-Lift Jeep or for anyone who wants to keep factory height.
View Rough Country 501064 Lifted Struts on Amazon
4. Detroit Axle 2pc Front Struts: Coil Spring Assembly Pair for 2016-2020 Grand Cherokee

- Listed for 2016-2020 Jeep Grand Cherokee
- Two front struts with coil springs
- Ready to install, no special tools
- 10-year warranty
Detroit Axle’s kit supplies two front struts with coil springs for the 2016 to 2020 Grand Cherokee. Getting both sides in one order removes the risk of mismatched left and right parts and keeps the front axle even. As with every WK2 listing, it suits steel-spring trims only, so check the fit notes for your engine and trim before ordering.
Each strut arrives as a complete assembly, ready to install with no extra work or special tools needed. Detroit Axle says its assemblies go through impact, wear and fatigue testing to help ensure quality and durability, and it backs this kit with a 10-year warranty. The pair format also simplifies the job of matching spring rates side to side, which keeps the Jeep sitting level. Keep the order details with your records in case a warranty claim comes up later.
This kit fits owners who want to refresh an older or high-mileage WK2 without paying for a name-brand corner on each side. It aims to restore a stock ride and height, not to sharpen handling or add lift. Note that the listing stops at the 2020 model year, so a 2021 owner needs a part that names that year.
View Detroit Axle Front Strut Pair on Amazon

5. Gabriel G57083 Ultra ReadyMount: Front Strut and Coil Spring Assembly for 2005-2010 Grand Cherokee 5.7L V8 AWD

- Listed for 2005-2010 Grand Cherokee 5.7L V8 AWD
- Also fits 2006-2010 Commander 3.7L V6
- Pre-assembled, no spring compression
- 6.75 in stroke, 21 in extended length
The Gabriel G57083 Ultra ReadyMount is a front strut and coil spring assembly for the 2005 to 2010 Grand Cherokee with the 5.7-liter V8 and all-wheel drive. The same part is listed for the 2006 to 2010 Commander with the 3.7-liter V6. It is sold as a single unit, so plan on two for the front axle and confirm your engine and drive type, since other WK versions use different springs.
The assembly arrives ready to install, which removes the spring compression step and cuts installation time. Gabriel lists a 6.75-inch stroke, a 21-inch extended length and a 14.25-inch collapsed length, and it publishes a long interchange list for cross-checking against your old part number. The maker describes it as fit and ride tested and built around its G-Force ride control.
The heavier Hemi engine puts extra load on the front springs, and a sagging corner on these Jeeps often shows up as uneven ride height or a front end that bottoms out over dips. A fresh loaded corner brings back the spring and mount at the same time. It is a stock replacement, not a lift, and it does not fit the SRT8.
View Gabriel G57083 Ultra ReadyMount on Amazon
6. Bilstein 5100 Set: Monotube Front Struts and Rear Shocks for 2005-2010 Grand Cherokee with 0.75-2 in Front Lift

- Valved for 2005-2010 Grand Cherokee
- 0.75-2 in front lift, 0-1.5 in rear
- 46mm monotube, digressive valving
- Zinc plated, limited lifetime warranty
This Bilstein 5100 set pairs front struts with rear shocks for the 2005 to 2010 Grand Cherokee. Bilstein says the dampers are valved and tuned for that Jeep with 0 to 1.5 inches of rear lift, and the front struts offer 0.75 to 2 inches of front lift. That range lets an owner add a modest level or a small lift while renewing all four dampers at once.
The 5100 uses a 46-millimeter monotube design, which Bilstein says delivers consistent, fade-free damping in all conditions. Its patented digressive valving reacts quickly to changing road surfaces for comfort and control on pavement and gravel. The bodies are zinc plated to resist corrosion, and Bilstein backs the 5100 line with its limited lifetime warranty for qualifying purchases.
These are bare struts, so the factory coil springs and upper mounts must be moved onto the new bodies with a suitable spring compressor. Many owners have a shop handle that step. Expect a firmer, more controlled ride than stock, which suits towing and rough roads, and plan an alignment after setting the front height. It is not the pick for anyone who prefers a soft, factory-style ride.
View Bilstein 5100 Shock and Strut Set on Amazon
Which Listing Fits Your Jeep
Use this table to narrow the best struts for Jeep Grand Cherokee models to one or two listings, then check the part number against your VIN.
| Your Grand Cherokee | Listing to check | Type | Watch for |
|---|---|---|---|
| 2011 to 2015, coil springs, keep stock height | Monroe Quick-Strut 272546L | Loaded, per corner | Buy the right-hand part too |
| 2011 to 2015, worn front and rear | Unity front and rear kit | Loaded struts plus rear shocks | Excludes SRT |
| 2011 to 2015, wants clearance | Rough Country 501064 | Loaded, 2.5-inch lift | Rear parts and alignment needed |
| 2016 to 2020, budget pair | Detroit Axle front pair | Loaded pair | Not for Quadra-Lift models |
| 2005 to 2010, 5.7 V8 AWD | Gabriel G57083 | Loaded, per corner | Engine and drive specific |
| 2005 to 2010, firmer or mild lift | Bilstein 5100 set | Bare struts plus rear shocks | Spring transfer required |

Some front-end noises point elsewhere. A chirp or creak over speed bumps is often a dry sway bar bushing or end link, which our article on why a car squeaks when going over bumps explains, while a single heavy knock can be a worn link or mount; see our post on a clunking noise over bumps.
Grand Rapids Roads and Grand Cherokee Struts
A Grand Cherokee is a heavy SUV, and freeze-thaw potholes around Grand Rapids hit its front struts hard every spring. The Car Care Council’s vehicle systems overview lists potholes among the main wear factors and suggests a steering and suspension check at least once a year, usually with a wheel alignment.
Watch for a second bounce after a dip, nose dive at stop signs, cupped front tires and oil streaks running down the strut body. Our guide on how to tell if struts are bad walks through each check.

Road salt makes the job slower than it looks. Lower strut bolts and upper mount nuts rust solid on Michigan Jeeps, so soak them with penetrating oil the day before and have new hardware ready.
Fitting Grand Cherokee Struts, and When to Let a Shop Do It
A loaded strut is a fair home job with a floor jack and stands. A bare strut such as the Bilstein 5100 is a different matter, because a compressed coil spring holds a dangerous amount of energy. If you do not own a compressor rated for SUV springs, have a shop do the transfer.
Whichever of the best struts for Jeep Grand Cherokee models you fit, book a wheel alignment afterward. New struts shift camber and toe slightly, and lifted struts shift them a lot. Bilstein explains its coverage on its North American warranty page, where the B8 5100 line sits under the limited lifetime terms.

Rather hand the Jeep over? Our suspension repair service in Grand Rapids covers struts, shocks and mounts. Steering and suspension is one of the areas where Hendrick Hoffman, who owns the shop and leads the work, holds both ASE and State of Michigan certification, and his background is on our about us page.
More Buying Guides
Frequently Asked Questions
Do coil-spring struts fit a Grand Cherokee with Quadra-Lift?
Not as a direct swap. Quadra-Lift Jeeps use air struts tied to a compressor and height sensors, so the coil-spring listings here only suit trims that left the factory with steel springs.
Is it worth doing the rear shocks when the front struts go in?
If they have covered the same miles, yes. Worn rear shocks let the back of the Jeep bounce after new front struts settle the nose, and the mismatch is easy to feel with a trailer or a loaded cargo area.
Does a 1999 to 2004 Grand Cherokee have struts?
No. The ZJ and WJ generations use solid axles with separate coil springs and shocks at all four corners, so you shop for shocks, not strut assemblies.
Is a wheel alignment needed after new struts?
Yes. Removing the strut disturbs camber and toe, and a lifted strut changes them further. An alignment protects the tires and keeps the Jeep tracking straight.
Is your Grand Cherokee wallowing over railroad crossings or knocking on rough pavement? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a strut inspection through our contact page.
Tied up during the workday? The shop offers after-hours drop-off, so the Jeep can come to 456 Carrier St NE, Grand Rapids, MI 49505, whenever your evening allows.
