As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A hollow knock from the front of a pickup every time it rolls over a driveway lip is one of the cheapest suspension problems to fix, as long as you order the right part. The best sway bar links for Ram trucks are the ones built for your exact generation, axle and ride height, because a 2016 Ram 1500, a 2021 Ram 1500 and a 2018 Ram 2500 each take a different link.
Below are six listings for the DS Ram 1500, the 1500 Classic, the new-body 1500 and the heavy duty trucks. For a wider look at links on cars, SUVs and other trucks, see our overview of sway bar end links for every kind of vehicle.
Quick answer
Which sway bar links should a Ram owner buy?
Start with the body style. A 2009 to 2018 Ram 1500 or a 1500 Classic takes the MOOG K80894 up front, while a 2019 or newer Ram 1500 needs a new-body link such as the TRQ set. A 2014 or newer 2500 or 3500 uses the MOOG K750889. Always confirm fit before ordering.
Our Quick Picks
Three quick picks for the DS Ram 1500, the new-body Ram 1500 and the heavy duty trucks. All six listings are reviewed below.

MOOG K80894
A serviceable front link for the DS truck and the 1500 Classic.

TRQ Front and Rear Link Set
One box that covers every link on a new-body Ram 1500.

MOOG K750889
A serviceable link for 2014 and newer heavy duty Rams.
Know Your Ram Before You Order a Link
A sway bar link is a short rod with a joint or bushing at each end. It ties the stabilizer bar to the lower control arm up front, or to the axle out back, so the bar can resist body lean in corners. A worn link lets the bar rattle and the truck lean.
- 2009 to 2018 Ram 1500: the DS body, with a front link and, on many trims, a rear link.
- 2019 to 2024 Ram 1500 Classic: the same DS truck sold alongside the new one, so it takes DS parts.
- 2019 and newer Ram 1500: the redesigned DT body, with its own front and rear links.
- 2014 and newer Ram 2500 and 3500: a solid front axle with a separate heavy duty link.
The Classic is where most ordering mistakes happen. A 2021 Ram 1500 Classic and a 2021 Ram 1500 share a model year and nothing else under the fenders, so check the title on your registration or the body code before you buy.
What Makes a Replacement Link Worth Buying
- Joint design: a booted ball stud suits a 1500, while some heavy duty links use spherical joints.
- Grease fitting: fresh grease pushes out water and grit.
- Hardware: new nuts in the box save a trip.
- Length: a leveled or lifted front end can need a longer link so the bar is not pulled into a bind.
Buy links in pairs for the same axle. Both sides have seen the same miles, and a matched pair loads the bar evenly.
Best Sway Bar Links for Ram: Six Listings by Truck and Axle
Every listing below names its years and position, and none of them fits every Ram. Enter your year, cab, drive type and engine on Amazon to confirm fit before ordering, and check whether the box holds one link or a pair.
1. MOOG K80894: Front Stabilizer Bar Link with Greaseable Socket for 2006-2018 Ram 1500 and 1500 Classic

- Listed for 2011-2018 Ram 1500 and 2019-2024 Ram 1500 Classic
- Greaseable socket flushes out old grease and debris
- Integral boot keeps dirt and water out
- Stop-out design sets bushing preload
The MOOG K80894 is a front stabilizer bar link for the DS generation Ram 1500. The listing names 2006 to 2010 Dodge Ram 1500, 2011 to 2018 Ram 1500 and 2019 to 2024 Ram 1500 Classic trucks, along with some 2003 to 2014 Ram 2500 models. Many other sellers list this part number for 4WD trucks only, so enter your drive type in the Amazon fit checker before ordering. It sells as a single link, so order two for the front axle.
MOOG calls this design a problem solver, since it combines features of socket-style and bolt-style links. A stop-out design means that once the nut sits fully against its stop, the molded bushings are preloaded correctly, which takes guesswork out of torque. An integral boot shields the joint, and a grease fitting lets you pump in fresh lubricant that pushes out water and debris.
This link suits an owner who plans to keep a 2009 to 2018 truck or a Classic for years and does not mind a grease gun at oil changes. It does not fit the redesigned 2019 and newer Ram 1500, and it is a stock-length part, so leveled trucks may need a longer link.
2. Mevotech Professional Grade MS258155: Front Stabilizer Bar Link Kit for 2019-2024 Ram 1500

- Listed for the 2019-2024 Ram 1500 front
- Mounting hardware included
- Protective surface treatment against rust
- In-house and third-party durability testing
The Mevotech MS258155 is a Professional Grade front stabilizer bar link kit listed for the 2019 to 2024 Ram 1500. That is the redesigned DT truck, not the 1500 Classic that shared showrooms with it. Check your registration or body code first. Then confirm year, cab, drive and engine on Amazon before ordering, and check how many links the box holds.
Mevotech sells this line as a replacement grade part built for professional installers. The listing points to three main features. First, the mounting hardware comes in the box, which matters because old nuts on rusted studs often get damaged on the way off. Second, a protective surface treatment slows corrosion, and third, Mevotech says the design went through in-house and third-party durability testing.
This kit suits a new-body Ram 1500 owner who has traced a front knock to the links and wants a direct replacement without buying rear links too. A home mechanic with basic hand tools and a way to hold the stud can manage the swap. It is not meant for the Classic, heavy duty Rams or trucks with a lift that changes link length.
View Mevotech MS258155 on Amazon

3. TRQ Sway Bar Stabilizer Link Set: 2 Front and 2 Rear Links for 2019-2024 Ram 1500

- Listed for the 2019-2024 Ram 1500
- Two front and two rear links in one kit
- Pre-assembled direct replacement parts
- Limited lifetime warranty against defects
The TRQ Sway Bar Stabilizer Link Set covers all four links on the 2019 to 2024 Ram 1500, with two front links and two rear links in one kit. The listing cross-references OE numbers in the 68399868 and 68409882 families, along with aftermarket numbers such as K750996 and MS258155. As with every Ram listing, confirm fit for your exact truck in the Amazon fit checker first.
TRQ describes these as pre-assembled direct replacements that bolt in without modification. The company also offers a large library of do-it-yourself install videos, which helps if this is your first suspension job. The set carries a limited lifetime warranty against defects in materials and workmanship when used as intended, and the listing notes that the warranty excludes normal wear and tear, misuse and modifications.
A full set makes sense on a higher-mileage new-body truck where the front links knock and the rear links show cracked boots or play. One trip under the truck covers both axles. It is more than you need if only one axle is worn, and it does not fit the 1500 Classic or any heavy duty Ram.
View TRQ Front and Rear Link Set on Amazon
4. Suspension Dudes Code Red K750396: Rear Sway Bar Link Pair for 2009-2018 Ram 1500 and 1500 Classic

- Listed for 2009-2018 Ram 1500 and 2019-2024 Classic
- Rear position, sold as a pair
- High-strength build with corrosion-resistant coating
- Direct-fit replacement for the K750396 number
The Suspension Dudes Code Red listing is a pair of rear sway bar links matching the K750396 part number. It names the 2009 to 2010 Dodge Ram 1500, the 2011 to 2018 Ram 1500 and the 2019 to 2024 Ram 1500 Classic. These links only matter if your truck has a rear stabilizer bar, so look under the back of the truck for one before ordering. Then confirm your exact truck in the Amazon fit checker.
The seller describes the Code Red line as built from high-strength materials with a corrosion-resistant coating, sold as a direct fit replacement. The listing says the links help hold the rear bar in control to reduce body roll and steady cornering. The coating matters, since rear links sit in the spray off the rear tires.
This pair suits a DS truck or Classic owner who hears a rattle from the back over rough pavement or sees torn boots on the rear links during an oil change. It is a rear part only, so it will not stop a front knock, and it does not fit the new-body Ram 1500.
View Suspension Dudes K750396 Rear Pair on Amazon

5. MOOG K750889: Stabilizer Bar Link with Greaseable Socket for 2014-2022 Ram 2500 and 2013-2022 Ram 3500

- Listed for 2014-2022 Ram 2500 and 2013-2022 Ram 3500
- Greaseable socket helps resist rust and wear
- Design updated from the OE part
- Quiet operation with an easy install
The MOOG K750889 is a stabilizer bar link listed for the 2014 to 2022 Ram 2500 and the 2013 to 2022 Ram 3500. These heavy duty trucks use a solid front axle, so their sway bar hardware is heavier than anything on a Ram 1500. Owners shopping for the best sway bar links for Ram 2500 trucks should start with this part number. Confirm year, engine and cab on Amazon before buying, and check how many links come in the box.
MOOG says the K750889 improves on the original equipment design while keeping quiet operation and a straightforward install. Its standout feature is a greaseable socket. Pumping in fresh grease at each service pushes out moisture and grit, which helps the joint resist rust and wear. That helps on a work truck that sees brined winter roads.
This link suits a stock-height 2500 or 3500, diesel or gas, that has started knocking over expansion joints or feels loose turning into a jobsite. It is not built for a leveled or lifted truck that needs a longer link, and it does not fit any Ram 1500.
6. Spohn D03-FEL-2: Extreme Duty Front Sway Bar End Links for 2003-2012 Ram 2500 and 3500 with a 2 Inch Level

- Listed for 2003-2012 Dodge Ram 2500 and 3500
- Sized for trucks with a 2 inch front level
- Teflon-lined chromoly spherical joints
- Low-deflection polyurethane bushings
The Spohn D03-FEL-2 is a pair of extreme duty front sway bar end links for the 2003 to 2012 Dodge Ram 2500 and 3500. The listing says they are made for trucks with a 2 inch front leveling kit installed. Raising the front changes the distance between the bar and the axle, and a stock-length link can bind or hold the bar at an awkward angle. Confirm your truck and lift height before ordering.
Spohn builds these links around Teflon-lined chromoly spherical joints, which the company says allow bind-free movement as the axle travels. The ends use low-deflection polyurethane bushings that Spohn says will not tear or break down the way soft rubber can. That firmer connection suits a heavy truck that plows snow or tows a gooseneck.
This pair suits an owner of an older leveled diesel or gas heavy duty Ram who wants links designed for the new ride height rather than stock parts pulled into a bind. Spherical joints and stiff polyurethane can pass a little more feel into the cab. It is not meant for stock-height trucks, Ram 1500s or 2013 and newer heavy duty models.
View Spohn D03-FEL-2 on Amazon
Matching a Listing to Your Truck
Start here, then verify the part number against your VIN.
| Your Ram | Listing to check | Position | Watch for |
|---|---|---|---|
| 2009 to 2018 Ram 1500 or 2019 to 2024 Classic | MOOG K80894 | Front | Sold as a single link |
| 2019 to 2024 Ram 1500, new body | Mevotech MS258155 | Front | Not for the Classic |
| 2019 to 2024 Ram 1500, both axles due | TRQ front and rear set | Front and rear | Four links in one box |
| 2009 to 2018 Ram 1500 or Classic | Suspension Dudes K750396 pair | Rear | Only trucks with a rear bar |
| 2014 to 2022 Ram 2500, 2013 to 2022 Ram 3500 | MOOG K750889 | Front | Confirm per-box quantity |
| 2003 to 2012 Ram 2500 or 3500, 2 inch level | Spohn D03-FEL-2 | Front | Sized for a leveled truck |
A link is only one possible source of a knock. Worn ball joints, tie rod ends, strut mounts and loose shocks can make a similar sound, and our guide to a clunking noise over bumps walks through how to narrow it down. If the outer steering joints are loose too, our picks of tie rod ends for Ram pickups pair well with a link job.

Road Salt, Frost Heaves and Ram Links in West Michigan
Winter in Grand Rapids is rough on small suspension joints. Once brine splits a boot, grit wears the socket loose, and spring potholes finish the job.
MOOG’s guide to the symptoms of bad sway bar links lists clunking over bumps, loose steering, an unstable feel in lane changes and extra body roll as the common signs. It names corrosion, pothole impacts and heavy loads as the usual causes, and a work truck in Michigan often sees all three.

Salt also makes the swap slower. The nut on a ball stud link often spins the stud with it, so plan to hold the stud with a hex or Torx bit and soak the threads with penetrating oil the night before.
Doing the Swap Yourself or Booking a Shop
On most Rams a link swap is two nuts per side, and on a 1500 it can be done with the wheel on the ground or the truck on ramps. Torque the nuts to the figure in the instructions, not by feel.
The best sway bar links for Ram 1500 and 2500 owners will not cure every rattle, so if new links leave the knock behind, the problem is elsewhere. Worn shocks let the axle bounce and hit harder over bumps, and our guide to shocks and struts for daily drivers covers what to check there.

When you would rather hand it off, our Grand Rapids suspension repair service can check the links, joints and bushings together in one visit. Hendrick Hoffman holds ASE and State of Michigan certification in steering and suspension work, and you can read more about him on our about us page.
More Buying Guides
Frequently Asked Questions
Does the Ram 1500 Classic use the same sway bar links as the new Ram 1500?
No. The Classic is the 2009 to 2018 DS truck carried forward, so it takes DS parts such as the MOOG K80894 up front. The redesigned 2019 and newer Ram 1500 uses different links.
Do I need longer sway bar links after leveling my Ram?
Often, yes. Raising the front changes the angle between the bar and the axle or control arm, and a stock link can bind or pull the bar out of position. Use a link sized for your lift, such as the Spohn links for a 2 inch level on older heavy duty trucks.
Should Ram sway bar links be replaced in pairs?
It is the sensible approach. Both links on an axle have covered the same miles, and replacing both keeps the bar working evenly from side to side. Check whether a listing holds one link or two before ordering.
Can a bad sway bar link cause a clunk when I turn?
Yes. A loose link usually knocks over bumps and can also clunk as the body leans in a turn or a driveway entrance. Ball joints and tie rod ends can make similar sounds, so check for play in those too.
Hearing a knock from your Ram every time you pull into the driveway? Call 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or request a pickup suspension check on our contact page.
If your workday runs past our hours, bring the truck to 456 Carrier St NE in Grand Rapids after work, then use our after-hours drop-off.
