456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Humming Up Front? Finding the Best Wheel Bearing for Ram 2500 Trucks by Year

best wheel bearing for ram 2500: tranquil dirt road enveloped by dense forest greenery

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A heavy duty pickup puts a lot of weight on its front hubs, and a Ram 2500 with a diesel up front and a trailer behind it can wear one out long before the rest of the truck is tired. The best wheel bearing for Ram 2500 owners is the hub assembly built for their exact model year and drive type, because Ram changed the front hub several times between 2003 and today.

This guide sorts six front hub listings by generation, from the 2003 to 2005 trucks to the current body. If you want the brand side of the story first, our rundown of wheel hub assembly brands worth trusting explains how the main names differ.

Quick answer

Which front hub fits my Ram 2500?

Match the hub to your years and drive type. A 2019 to 2023 truck takes the MOOG 515206, a 2014 to 2018 truck takes a 515162 style hub such as the Detroit Axle pair, and a 2003 to 2005 4WD truck takes the TRQ 515061 set. Confirm fit with your VIN before ordering.

Our Quick Picks

Three quick picks for the current Ram 2500, the 2014 to 2018 trucks and the 2003 to 2005 4WD trucks. All six hubs are reviewed below.

MOOG 515206 product photo
2019 and newer

MOOG 515206

Front hub · sealed · sold singly

A direct replacement hub for the current Ram 2500 body.

Suits2019 to 2023 trucks with a front hum on one side
View on Amazon →
Detroit Axle 2014-2018 Front Pair product photo
2014 to 2018

Detroit Axle 2014-2018 Front Pair

Front pair · 8-lug · ABS on hub

Both front hubs for the 2014 to 2018 trucks in one box.

SuitsHigh-mileage trucks due on both sides
View on Amazon →
TRQ 2003-2005 Front Set product photo
2003 to 2005 4WD

TRQ 2003-2005 Front Set

Front set · 2 hubs · lifetime warranty

Both front hubs for the early third generation 4WD trucks.

SuitsOlder diesel trucks kept for the long haul
View on Amazon →

Start With the Generation and Drive Type

On a Ram 2500 the front wheel bearing is part of a sealed hub assembly. The bearing, flange, wheel studs and usually the ABS sensor come as one unit that bolts to the steering knuckle, and you replace the whole piece rather than repacking a loose bearing.

  • 2003 to 2005: the first years of the third generation, with a 4WD hub sold under part number 515061.
  • 2006 to 2008: a revised 4WD hub, 515101, also listed for 8-lug Ram 1500 trucks of the same years.
  • 2009 to 2011: separate 4WD and 2WD hubs, so the drive type decides the part.
  • 2012 to 2013: a short run with its own 4WD hub, so check carefully if your truck sits on the line.
  • 2014 to 2018: the 515162 style hub, shared with the Ram 3500.
  • 2019 and newer: the current body, with the 515206 style hub.

The registration year is only a starting point. Build dates and cab and chassis models shift fit, so check your VIN before you pay.

Features That Matter on a Heavy Duty Hub

  • Seals: multi-lip seals keep brine and grit away from the rollers.
  • ABS sensor: some hubs carry the sensor on the unit, while others use a sensor wire, and the plug must match your harness.
  • Studs and flange: Ram 2500 front hubs are 8-lug units, so match the lug count and flange bolt pattern to the old part.
  • Single or pair: a two-pack makes sense on a high-mileage truck, since both sides have carried the same load.

Rear bearings are a separate job. Most Ram 2500 trucks use a full-floating rear axle with tapered bearings that run in the axle’s gear oil, so none of the front hubs below apply to the back of the truck.

Best Wheel Bearing for Ram 2500: Six Hubs by Model Year

None of these listings fits every Ram 2500. Confirm your year, cab, drive type and engine on Amazon, and check whether the box holds one hub or two.

1. MOOG 515206: Front Wheel Bearing and Hub Assembly with Quad Lip Seal for 2019-2023 Ram 2500

MOOG 515206 product photo
Key features
  • Listed for 2019-2023 Ram 2500 and 2019-2023 Ram 3500
  • Sealed bearing assembly built for quiet running
  • Quad lip seal keeps out moisture and debris
  • Rust resistant hub with secure studs

The MOOG 515206 is a front wheel bearing and hub assembly for the current generation of heavy duty Ram. The listing names the 2019 to 2023 Ram 2500, along with the 2019 to 2023 Ram 3500. It is sold as a single hub, so order two if both sides need attention. Confirm fit on Amazon before ordering.

The listing calls this a sealed, noise-free hub, and the main protection comes from a quad lip seal meant to keep moisture and debris away from the bearing. MOOG also points to a rust resistant hub surface and secure wheel studs that come already pressed in, so the part bolts in as one piece. On a truck that sees brine every winter, the seal and the coating are the two features worth paying attention to.

This hub suits an owner of a newer Ram 2500 who has traced a hum or a little wheel play to one front corner and wants a replacement from an established chassis parts brand. It does not fit 2018 and older trucks, and it is a front part only, so it will not help with a noise coming from the rear axle.

View MOOG 515206 on Amazon

2. Detroit Axle Front Hub Pair: Two 8-Lug Wheel Bearing Hubs with ABS for 2014-2018 Ram 2500

Detroit Axle 2014-2018 Front Pair product photo
Key features
  • Listed for 2014-2018 Ram 2500 and 2014-2018 Ram 3500
  • Two front hubs, left and right, in one kit
  • 8 lugs, ABS on the hub, 4-bolt square flange
  • 10-year warranty

The Detroit Axle front hub pair covers the 2014 to 2018 Ram 2500, a generation that shares its front hub with the Ram 3500. The listing names 2014 to 2018 Ram 3500 trucks and some 2013 Ram 3500 crew cab and standard cab pickups as well. The kit holds two front wheel bearing and hub assemblies, one for each side. Confirm your truck on Amazon before ordering, especially if it is a cab and chassis model.

Detroit Axle lists the hub specifications plainly: front left and right position, 8 bolt studs, the ABS sensor on the hub and a four-bolt square mounting flange. Those are the details to compare against the old part when it comes off. The listing also includes a 10-year warranty, which is worth noting for a work truck that racks up miles quickly.

This pair suits a 2014 to 2018 owner whose truck has high miles, tows often or carries a plow frame, since both front hubs have seen the same load and salt. It is not the right buy if only one side has failed early from an impact or if your truck is a 2019 or newer model.

View Detroit Axle 2014-2018 Front Pair on Amazon

peaceful winding road through lush green countryside

3. MOOG 515122: Front Wheel Bearing and Hub Assembly for 2009-2011 Ram 2500 4WD

MOOG 515122 product photo
Key features
  • Listed for 2009-2010 Dodge Ram 2500 and 2011 Ram 2500
  • Also listed for 2009-2011 Ram 3500
  • Quad lip seal against moisture and debris
  • Easy install hub with studs fitted

The MOOG 515122 is a front wheel bearing and hub assembly for the 2009 to 2011 trucks. The listing names the 2009 and 2010 Dodge Ram 2500, the 2011 Ram 2500 and the matching Ram 3500 years. Many other sellers list the 515122 number as the 4WD hub, while the 2WD trucks of the same years use a different part, so check your drive type first. It is sold as a single hub.

MOOG describes this as an easy install hub kit with secure studs and a rust resistant hub. A quad lip seal is meant to keep moisture and debris out of the sealed bearing, which helps a hub last longer on salted roads. It replaces the original unit as one piece, with no loose bearing to pack.

This hub suits an owner of a 2009 to 2011 4WD truck who has found a bad bearing on one side and wants a single replacement from a well known chassis brand. It is not meant for 2WD trucks of the same years, which take the 515123 style hub below, and it will not fit the 2012 and newer trucks.

View MOOG 515122 on Amazon

4. Detroit Axle 515123: 2WD Front Wheel Bearing and Hub Assembly with ABS Sensor for 2009-2011 Ram 2500

Detroit Axle 515123 RWD product photo
Key features
  • For rear-wheel drive (2WD) models only
  • Listed for 2009-2010 Dodge Ram 2500 and 2011 Ram 2500
  • 8 bolts, 4 mounting bolts, ABS sensor wire
  • 10-year warranty

The Detroit Axle 515123 is the two-wheel drive counterpart for the 2009 to 2011 trucks. The listing says plainly that it fits rear-wheel drive models only, and it names the 2009 and 2010 Dodge Ram 2500 and Ram 3500, plus the 2011 Ram 2500 and 3500. The box holds one front hub that fits either side. Confirm your drive type on Amazon or with your VIN before ordering.

The listed specifications are 8 bolt studs, four mounting bolts and an ABS sensor wire that runs from the hub to the truck’s harness. That sensor wire is worth inspecting on the old part, because a chafed or corroded lead can cause an ABS fault even when the bearing itself feels fine. Detroit Axle backs the hub with a 10-year warranty, according to the listing.

This hub suits a 2WD Ram 2500 used as a work truck or a hauler, where the drive type is easy to miss when ordering parts online. A 2WD hub has no splined center for a front axle shaft, so it is a different part from the 4WD 515122 above. It will not fit a 4WD truck of any year, and it does not cover 2012 and newer models.

View Detroit Axle 515123 RWD on Amazon

from above of anonymous artisan using rivet press and setting rivets on leather belt while working at table in

5. A-Premium Front Hub Pair: 8-Lug Wheel Bearing and Hub Assemblies with ABS for 2006-2008 Ram 2500 4WD

A-Premium 2006-2008 Front Pair product photo
Key features
  • Listed for 2006-2008 Ram 1500, 2500 and 3500, 4WD only
  • Two front hubs with speed sensors included
  • 8 lugs, 4-hole flange, pre-greased
  • Reference part number 515101

The A-Premium front hub pair is a two-piece set of 515101 style hubs for the 2006 to 2008 4WD trucks. The listing names the Dodge Ram 2500 and 3500 of those years, along with the 8-lug Ram 1500 4WD. It is marked 4WD only. The kit holds a left and a right front hub, and the listing gives the OE reference numbers 05179955AA and 5179955AA alongside 515101.

A-Premium lists roller bearings for axial and radial loads, a 4-hole flange, 8 lug studs, a speed sensor already fitted and a pre-greased bearing. The splined center accepts the front axle shaft directly, and the listing says the new hub includes the axle spline, bearing cage and sealing parts. A-Premium also states a one-year unlimited-mileage guarantee on the hub. Check that the sensor plug matches your harness before fitting.

This pair suits an owner of a 2006 to 2008 4WD truck who wants to refresh both front corners at once on a budget-minded set. It is not meant for 2WD trucks, and owners who plan to keep the truck for many more years may prefer a single hub from a longer-established chassis brand.

View A-Premium 2006-2008 Front Pair on Amazon

6. TRQ Front Wheel Bearing and Hub Assembly Set: Driver and Passenger Hubs for 2003-2005 Ram 2500 4WD

TRQ 2003-2005 Front Set product photo
Key features
  • Listed for 2003-2005 Dodge Ram 2500 and 3500 4WD
  • Driver and passenger hubs in one set
  • Cross-references 515061, HA590032 and BR930502
  • Limited lifetime warranty

The TRQ front wheel bearing and hub assembly set is a two-piece kit for the 2003 to 2005 Dodge Ram 2500 and 3500 4WD trucks. It holds one driver side hub and one passenger side hub. The listing cross-references a long list of numbers, including 515061, Timken HA590032 and SKF BR930502, which makes it easier to compare against the part already on the truck. Use the Amazon Garage fit check before ordering.

TRQ sells this as a pre-assembled, direct-fit replacement for the original hubs, so it bolts in without modification. The brand also runs a large library of do-it-yourself install videos, which helps a home mechanic who has never pulled a solid front axle hub before. The listing includes a limited lifetime warranty against defects in materials and workmanship, though it excludes normal wear and misuse.

This set suits an owner who is keeping an early third generation truck on the road, often for its diesel engine, and wants both front hubs replaced in one job. It is a 4WD part, so it will not fit the 2WD trucks of those years, which use a different hub. It also does not cover the 2006 and newer trucks.

View TRQ 2003-2005 Front Set on Amazon

Part Number Cheat Sheet for Ram 2500 Front Hubs

Use this table to find the right listing, then confirm it against your VIN.

Your Ram 2500Listing to checkDrive typeIn the box
2019 to 2023MOOG 515206Confirm on AmazonOne hub
2014 to 2018Detroit Axle front pairConfirm on AmazonTwo hubs
2009 to 2011MOOG 5151224WDOne hub
2009 to 2011Detroit Axle 5151232WD onlyOne hub
2006 to 2008A-Premium front pair4WD onlyTwo hubs
2003 to 2005TRQ front set4WDTwo hubs
Ram 2500 front hub listings compared by model year, drive type and quantity

A 2012 or 2013 truck uses its own 4WD hub, so search that part separately. First, make sure the noise really is a bearing. Our guide to wheel bearing noise symptoms shows how a hum that changes with speed and load differs from tire or driveline noise.

captivating countryside road with a scenic view of lush green hills and vibrant skies

Salt, Plows and Stuck Hubs in West Michigan

Grand Rapids winters are hard on heavy duty front ends. Brine works past worn seals, potholes hammer the bearings, and a plow frame adds weight up front.

MOOG’s overview of its hub assemblies for cars and trucks notes that hubs are built to seal out water, dirt and contaminants. It adds that its truck hubs use a unitized design and a heat shield to deflect brake heat, and that some hubs come with a corrosion-resistant epoxy coating.

picturesque dirt road stretches through Montana's vast countryside with mountains in the background

Rust also makes removal slower. A hub that has sat in a salty knuckle for years can seize in its bore, and our page on how long wheel bearings typically last covers why a truck that tows or plows often needs hubs sooner than the average.

When the Hub Job Belongs in a Shop

A front hub swap on most of these trucks means pulling the caliper, rotor, axle nut and four flange bolts. Torque every fastener to the specification for your truck, not by feel.

The best wheel bearing for Ram 2500 trucks cannot fix a knuckle bore that has rusted out or an axle shaft with a worn U-joint. If you are also replacing bearings on another vehicle that uses press-in units, our look at the wheel bearing press kits for home garages explains which tools that job needs.

tranquil winter landscape featuring a snow-covered forest pathway lined with frosty trees

If the hub will not budge, or you would like the steering joints checked at the same time, our wheel bearing replacement service in Grand Rapids handles heavy duty trucks. Hendrick Hoffman is ASE and State of Michigan certified in steering and suspension, and you can read about his background on our about us page.

Frequently Asked Questions

Can the front wheel bearing on a Ram 2500 be replaced on its own?

Not on the trucks covered here. The front bearing is sealed inside a hub assembly with the flange, studs and usually the ABS sensor, so the whole unit is replaced as one part.

Does a 2WD Ram 2500 use the same front hub as a 4WD truck?

No. A 4WD hub has a splined center for the front axle shaft, and a 2WD hub does not. On 2009 to 2011 trucks, for example, the 4WD part is the 515122 and the 2WD part is the 515123.

Should I replace both front hubs on my Ram 2500 at once?

It often makes sense on a truck with high miles, since both hubs have carried the same weight and salt. If one side failed early from an impact or a torn seal, replacing just that side is reasonable.

Can a bad front hub turn on the ABS light?

Yes. On hubs that carry the wheel speed sensor, a worn bearing or damaged sensor can trigger the ABS warning. Our guide to an ABS light that stays on explains the other common causes.

Is your Ram 2500 humming louder every time you merge onto the highway? Call 456 AutoFix at 616-279-3832 from 8am to 5pm, Monday to Friday, or set up a front hub inspection through our contact page.

Need the truck for work all day? Leave it at 456 Carrier St NE in Creston once you are done, and use our after-hours drop-off.