456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Dealer Part or Bearing Maker? Timken vs Motorcraft on a Ford Explorer

timken vs motorcraft: stunning aerial shot of a winding mountain road surrounded by greenery

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A worn hub on a Ford Explorer rarely fails all at once. It starts as a low hum that rises with road speed, changes pitch when you sweep through a long curve, and slowly gets louder over a few months. When the dealer quote arrives with a Motorcraft part on it, the obvious next search is timken vs motorcraft, because Timken sells a hub that lists the same Ford number on its box.

To keep this fair, every part below is a hub and bearing assembly for one Ford position: the unit sold under Ford number BB5Z-1104-A for the 2011-2019 Explorer and the 2013-2019 Police Interceptor Utility. If you want a wider field of brands and part numbers, our guide to wheel hub assembly brands covers more vehicles.

Quick answer

Should an Explorer get a Timken or a Motorcraft hub?

Both are bolt-on hub assemblies for the same BB5Z-1104-A position. Choose Motorcraft HUB-87 if you want the brand Ford dealers stock. Choose Timken HA590446 if you want a bearing specialist’s unit that prints the Ford number it replaces. Either way, match the number on your old hub first, because the corner varies by year.

Our Quick Picks

Timken HA590446 and Motorcraft HUB-87 for the same 2011-2019 Explorer hub position, plus SKF BR930809 as a third option that shares the interchange. All three are covered in full below.

Timken HA590446 product photo
Timken pick

Timken HA590446

Bolt-on hub, BB5Z-1104-A interchange

Bearing specialist hub that names the Ford number it replaces.

SuitsOwners who want an aftermarket hub and can match the Ford number
View on Amazon →
Motorcraft HUB-87 product photo
Motorcraft pick

Motorcraft HUB-87

Factory-brand hub, part HUB-87

The Ford parts counter option, ordered by its part number.

SuitsExplorer owners who want the factory brand on the shelf
View on Amazon →
SKF BR930809 product photo
Third option

SKF BR930809

Same interchange, SKF wheel end

A third bearing maker for the same hub, with instructions on the box.

SuitsBuyers who want another name brand to compare
View on Amazon →

Dealer Brand or Bearing Specialist

Motorcraft is Ford’s own parts label, the name on the boxes behind a Ford dealer’s parts counter. Buying it means buying the part the dealer would order for your VIN, under the number Ford uses in its own catalog. The trade-off is that the Amazon page tells you very little, so the part number does all the work.

Timken is a bearing company first, and its hub assemblies are sold to repair shops and parts stores under its own HA and SP part numbers. Its listing for this hub does what the Motorcraft one does not: it prints the Ford number BB5Z1104A in the title, plus the SKF and MOOG numbers that share the same fit. That makes it easier to confirm that both boxes are aimed at the same corner of the same truck.

What a hub and bearing assembly replaces

On the Explorer, the wheel bearing is not a loose part you press into the knuckle. It comes sealed inside a flanged hub that bolts to the knuckle, with the wheel studs already fitted. The whole unit is the replacement part, which is why the dealer, Timken and SKF all sell it as one piece.

That design keeps the job simpler than on cars with press-in bearings. There is no bearing to pack with grease and no preload to set. The work is mostly removing the brake caliper, rotor, axle nut where a halfshaft is fitted, and the bolts that hold the hub to the knuckle.

Timken vs Motorcraft Wheel Bearings on Paper

The table uses only what each Amazon US listing states, along with the MOOG 512460 listing that ties the numbers together. Where a page is silent, the cell says so rather than guessing.

PointTimken HA590446Motorcraft HUB-87
Brand typeBearing maker, aftermarket lineFord’s own parts brand
Ford number shownBB5Z1104A in the titleNot shown; HUB-87 is the Motorcraft number
Other numbers shownSKF BR930809, MOOG 512460None
Vehicles namedNone in the listingNone in the listing
Country of originNot statedUnited States
Warranty wordingNot statedNot stated
Timken vs Motorcraft hub assemblies for the Ford BB5Z-1104-A position on the 2011-2019 Explorer, from their Amazon US listings

On paper the two boxes look more alike than different. The Timken listing gives you more to check against, while the Motorcraft listing gives you the factory label and a stated country of origin. Neither page states a warranty term, so ask the seller before you order if that matters to you.

peaceful rural road

The position matters as much as the brand. MOOG’s listing names the 2011-2019 Explorer with no corner, and other listings for the same interchange say front and rear on 2011 and 2012 models but rear only on later ones. Read the number off the old hub or confirm it for your VIN before trusting any year range.

Timken vs Motorcraft: The Three Explorer Hubs Side by Side

Each listing below is a single hub, so a pair job means ordering two. Enter your year, drivetrain and trim in Amazon’s fit tool too, since none of the three pages prints a full vehicle chart.

Timken HA590446: Wheel Bearing and Hub Assembly Replacing Ford BB5Z-1104-A

Timken HA590446 product photo
Key features
  • Timken part number HA590446
  • Title lists Ford BB5Z1104A, SKF BR930809 and MOOG 512460
  • Described as an OE-grade replacement
  • Sold as a single hub assembly

Timken HA590446 is a wheel bearing and hub assembly sold one per box. The Amazon title states that it replaces Ford BB5Z1104A, SKF BR930809 and MOOG 512460, and calls it an OE-grade replacement. That Ford number is the hub that MOOG’s own listing ties to the 2011-2019 Explorer and the 2013-2019 Police Interceptor Utility, so the cross-reference is the easiest way to see whether this unit belongs on your truck.

The listing is thin. It gives package size, a package weight of about 4.6 kg and a quantity of one, but it prints no vehicle chart, no position and no warranty term. Because the hub is a bolt-on unit, it arrives with the bearing sealed and preset inside the flange, so there is no bearing to press and no grease to pack. You still need to move the brake caliper, rotor and any axle nut to swap it.

This pick suits a driver who has read the number off the old hub, or confirmed BB5Z-1104-A for the VIN, and wants a bearing specialist’s part rather than the dealer one. It is a poor match if you only know the model year, because the listing gives no fitment help and the corner it belongs on can vary by year and drivetrain. Check Amazon’s fit tool before ordering.

View Timken HA590446 on Amazon

straight highway with trucks amidst overcast skies and surrounding fields

Motorcraft HUB-87: Genuine Ford Hub Assembly for the BB5Z-1104-A Position

Motorcraft HUB-87 product photo
Key features
  • Motorcraft part number HUB-87
  • Ford's own parts brand
  • Country of origin listed as United States
  • Listing names no vehicles, order by number

Motorcraft is the parts brand Ford sells through its dealers, and HUB-87 is its hub and bearing unit for this position. MOOG’s 512460 listing names HUB-87 and BB5Z-1104-A among the numbers it replaces, which links this box to the same Explorer hub as the Timken. We also cover HUB-87 in our Ford wheel bearing brand roundup, and it reappears here because no other Motorcraft part fits this head-to-head.

The Amazon page is short. It lists the part number, a package weight of about 11 pounds and a country of origin of United States, and that is all. There is no fitment table, no position and no warranty wording, so treat it as a counter part that you match by number rather than by model year.

HUB-87 makes sense when you want the brand Ford itself stocks and have confirmed the number from the old hub, a Ford parts catalog or the VIN. It is a weaker fit for buyers who rely on Amazon’s vehicle chart, since the listing gives that chart nothing to work with. Like any bolt-on hub, it still needs the caliper, rotor and axle nut torqued to the figures in the Ford service information.

View Motorcraft HUB-87 on Amazon

SKF BR930809: Wheel Hub Bearing Assembly for Ford 2011-2019

SKF BR930809 product photo
Key features
  • SKF part number BR930809
  • Title says compatible with Ford 2011-2019
  • Includes the parts for a complete bearing job
  • QR code on the box label links to SKF instructions

SKF BR930809 is the third number in the Timken title, which makes it a natural third choice for the same Explorer hub. The Amazon title calls it compatible with Ford 2011-2019, and the listing says the box includes all the components needed for a complete wheel bearing replacement. SKF adds that the part meets or exceeds OE specifications.

Two details set it apart from the other two boxes. SKF prints a QR code on the box label that leads to its installation steps and technical information, and the listing states plainly that the part should be fitted by a knowledgeable mechanic using correct tools and following both SKF’s instructions and the vehicle’s own procedure. Neither Timken nor Motorcraft says that much on its Amazon page.

This unit suits a buyer who wants a third name brand to compare against the first two, or who values printed instructions in the box. It is not a reason to skip the fit check: the listing names a span of Ford years rather than a model and corner, so confirm the BB5Z-1104-A position for your Explorer and drivetrain before you order, and look at the old hub’s number if you can reach it.

View SKF BR930809 on Amazon

Picking the Box for Your Explorer

Most Explorer owners asking this question are not chasing a performance gain. They want the hum gone, the ABS light off and a hub that lasts through the next several winters, and how they buy parts shapes the choice more than the logo does.

Your situationCloser matchWhy
You want the dealer’s own partMotorcraft HUB-87Ford’s parts brand, ordered by its number
You check cross-references firstTimken HA590446Title prints the Ford, SKF and MOOG numbers
You want printed install stepsSKF BR930809QR code on the box links to instructions
Only one side humsAny, matched by numberConfirm which corner before buying
You only know the model yearNone yetFind the part number first
Choosing between Timken, Motorcraft and SKF hub assemblies for the Explorer’s BB5Z-1104-A position

If you are still unsure which corner is making the noise, our article on wheel bearing noise symptoms walks through the hum, growl and click patterns and how load shifts in a turn point to one side. Guessing the wrong corner is the most common way to spend money on a hub and keep the noise.

scenic aerial view of rural Nepal with lush greenery and small villages

For comparisons on other vehicles, see how the same bearing maker stacks up in our Timken and MOOG hub comparison on a Silverado and the Timken and SKF matchup on a Camry. SKF’s automotive bearing business now runs as SKF Vertevo, and its vehicle aftermarket overview describes a range that runs from powertrain parts to the wheel end.

Swapping an Explorer Hub at Home

Start with the vehicle on solid stands, not just a jack, and the wheel off. Our guide to jack stands for Ford vehicles covers ratings and lift points for a truck this heavy. Then the caliper and its bracket come off and get hung with wire so the hose is not stretched.

Next come the rotor, the axle nut on corners with a halfshaft, and the hub bolts behind the knuckle. Torque the new hub bolts and the axle nut to the figures in the Ford service information for your year and drivetrain, and use a new axle nut if the manual calls for one. Do not run the nut down with an impact gun and call it done.

black car navigating a winding road through lush green mountains

ABS sensor and tone ring notes

None of the three listings mentions a wheel speed sensor in the box, so plan on keeping your existing one. Unclip its wiring before you pull the hub, keep the sensor tip clean, and route the lead back into its clips so it cannot rub on the halfshaft or rotor. If the ABS or traction light comes on after the swap, our page on why an ABS light stays on lists the usual causes.

Not every Ford is this simple. Some models use a bearing pressed into the knuckle, and those jobs need a press tool and the right adapters, which our wheel bearing press kit guide explains. If you open up a different Ford and find a press-in bearing, stop and line up the tool before you go further.

Grand Rapids Salt and a Seized Hub

West Michigan winters are hard on wheel ends. Road salt and slush work into the gap between the hub flange and the knuckle, and after a few seasons the old hub can rust in place even with every bolt removed. Freeze-thaw potholes add the impacts that wear the bearing in the first place.

tranquil rural scene

Soak the hub bolts and the flange seam with penetrating oil the night before, and clean the knuckle bore with a wire brush before the new hub goes in. A thin coat of anti-seize on the bore, kept off the sensor and the bolt threads, makes the next replacement easier. Both brands go into the same rusty bore, so this prep step matters more than which side of the timken vs motorcraft debate you land on.

Wheel bearings do not run on a fixed schedule, and our article on how long wheel bearings last explains why salt, potholes and heavy loads cut that life short. Check for new hum or play each time you swap between winter and summer tires.

When the Explorer Should Come to a Shop

A hub that is rusted solid to the knuckle, an axle nut you cannot break loose, or an ABS light that will not clear are all good reasons to stop. So is a noise you cannot pin to one corner, since replacing the wrong hub costs a part and a weekend.

We handle wheel bearing replacement in Grand Rapids on foreign and domestic vehicles, Explorers included. Hendrick Hoffman holds ASE and State of Michigan certification in steering and suspension and in brakes, the two systems this job touches.

Frequently Asked Questions

Is Timken as good as Motorcraft for an Explorer hub?

In the timken vs motorcraft choice, neither Amazon listing publishes test data or a warranty term, so there is no measured winner. Motorcraft is Ford’s own brand, while Timken prints the Ford number BB5Z1104A it replaces. Pick the one you prefer and match the number on your old hub.

Does Motorcraft HUB-87 fit the front or the rear?

It depends on the year and drivetrain. Listings for this interchange disagree, with some naming both ends on 2011 and 2012 Explorers and only the rear on later trucks. Confirm the corner with the number on the old hub or a VIN lookup before you order.

Should I replace Explorer hubs in pairs?

It is not required, since a hub is not matched to its partner the way brake pads are. Many owners replace both sides on a high-mileage truck because the other hub has seen the same miles and salt, but a single noisy hub can be replaced on its own.

Do I need a press to change this hub?

No. The Explorer hub bolts to the knuckle as a complete unit, so the bearing is never pressed by hand. You may still need a puller or a lot of penetrating oil if rust has locked the old flange into the knuckle.

Hearing a hum from the Explorer that grows with speed? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or book a wheel bearing check through our contact page.

If your workday runs the same hours as ours, leave the Explorer at 456 Carrier St NE in Creston through our after-hours drop-off, with a note on which side the noise seems to come from.