As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A diesel pickup holds more oil than a gas car, runs it harder and loads it with soot, so the filter carries a heavier job between changes. The best oil filter for diesel trucks starts with the right number for your engine, whether that is a Cummins in a Ram, a Duramax in a GM heavy duty or a Power Stroke in a Super Duty.
This guide covers what sets a diesel filter apart, how to find your number, and six filters across the three engine families, including the older 7.3L and 6.0L Power Stroke. For gas vehicles, our roundup of the best oil filter brand for cars and light trucks covers the everyday side.
Quick answer
Which oil filter should a diesel truck owner buy?
Buy the filter listed for your exact engine: a 5083285AA-type spin-on such as the Fleetguard LF3972 for 5.9L and 6.7L Cummins, a PF2232 match for 2001-2019 Duramax, or the Motorcraft cartridge your Power Stroke takes. Confirm fit by VIN and change it with every oil change your manual calls for.
Our Quick Picks
One starting point per engine family: Fleetguard for Cummins Rams, a PF2232 cross for 2001-2019 Duramax trucks and the factory Motorcraft cartridge for the 6.0L and 6.4L Power Stroke. All six filters are reviewed below.

Fleetguard LF3972
Cummins Filtration's own spin-on for the Ram Cummins.

Doc's Diesel PF2232 Cross
A PF2232 cross that names the 6.6L Duramax in its listing.

Motorcraft FL-2016
The factory Motorcraft element for the 6.0L and 6.4L.
What Sets a Diesel Oil Filter Apart
Diesel combustion makes soot, and some of it reaches the crankcase, where it thickens the oil and wears bearings. A diesel filter is usually larger than a car filter, so it can hold more of that load before it starts to restrict flow.
Details worth comparing on a listing:
- Efficiency rating: a figure such as “99% at 25 microns” or “95% at 30 microns” tells you how fine a particle the media catches and how often.
- Burst strength: a diesel builds high oil pressure on a cold start, so the can must be strong.
- Spin-on or cartridge: Cummins and older Duramax engines take spin-on cans, while the 7.3L and 6.0L/6.4L Power Stroke use a paper element inside a housing on top of the engine.
- Full-flow or bypass: everything here is a full-flow filter, the one the engine needs. A bypass kit is an optional extra, never a replacement.
The oil matters as much as the filter. The American Petroleum Institute’s engine oil licensing and certification program sets the categories printed on the bottle, with input from vehicle and engine makers including the Truck and Engine Manufacturers Association. Use the category and grade your owner’s manual lists.
Find Your Filter Number Before You Pick a Brand
Diesel filter numbers changed over the years even within one engine family. Ram switched the 6.7L Cummins to a cartridge filter for 2025, and GM moved the L5P Duramax from PF2232 to PF26 in 2020.
Start with the number on your old filter or in the manual, run it through the Amazon fit checker, and confirm by VIN. Owners of the newest engines will find model-specific picks in our posts on the best oil filter for 6.7 Cummins Rams, the best oil filter for Duramax engines and the best oil filter for the Ford 6.7 diesel.
Best Oil Filter for Diesel Trucks, Engine by Engine
Each listing below names one filter number, so check it against your truck before buying.
1. Fleetguard LF3972: Spin-On Lube Filter 3-Pack for 5.9L and 6.7L Cummins, Replaces 5083285AA

- Replaces Chrysler 5083285AA
- Fits 5.9L and 6.7L Dodge light-duty diesels
- Rated 95% at 30 microns (TWA)
- Pack of three filters
Fleetguard is the filter brand of Cummins Filtration, so the LF3972 comes from the same corporate family as the engine in many Ram heavy duty pickups. The listing says it fits Dodge light-duty trucks with the 5.9L and 6.7L turbo diesel, and it names Chrysler 5083285AA and Cummins 3949561 as primary applications. It also lists Baldwin BT7349 and Donaldson P558615 as equivalent numbers, which helps if you are matching an old filter from another brand.
The listing gives real dimensions rather than marketing language. It quotes an overall height of 176.7 mm, a largest outside diameter of 93.47 mm, a gasket outside diameter of 71.88 mm and a 1-16 UN-2B thread. Efficiency is listed as 95% at 30 microns on a time-weighted basis. Those figures let you compare it directly with the filter you are taking off, and the three-pack covers several changes.
This filter suits Cummins trucks that use the spin-on can. Ram moved the 6.7L to a cartridge housing for 2025, so newer trucks need a different part, and our 6.7 Cummins guide covers those. As with any diesel filter, confirm the number for your year by VIN and follow the change interval in your owner’s manual.
View Fleetguard LF3972 on Amazon
2. K&N HP-4003: Spin-On Oil Filter with Wrench-Off Nut for Select 1989-2022 Ram and Dodge

- Wrench-off nut on the can
- Pleated synthetic-blend media
- Works with synthetic, conventional or blend
- Lab tested for capacity and burst strength
The HP-4003 is K&N’s spin-on filter for select Ram, Dodge and Sterling trucks from 1989 to 2022. Its most practical feature sits on the end of the can: a nut that takes a socket or wrench, so you can remove the filter without a strap tool. On a big diesel filter that has been on through a hot summer of towing, that can save a lot of time and skinned knuckles.
K&N describes the media as a pleated synthetic blend that removes most harmful contaminants while keeping a consistent flow of oil to the engine. The listing says the filter is laboratory tested for capacity and burst strength, which matters on a diesel that builds high oil pressure on a cold start. It is designed for synthetic, conventional and blended motor oils, so it doesn’t limit your choice of oil.
Because the listing covers a broad range of model years and brands, it does not guarantee a fit for every Ram. Enter your year, cab and engine in the Amazon fit checker and confirm by VIN before ordering. The nut makes removal easier, but it doesn’t change the interval: replace it with every oil change your manual calls for.

3. K&N HP-3003: Spin-On Oil Filter with Wrench-Off Nut for Select 2001-2019 Chevrolet, GMC and Hummer

- Wrench-off nut for socket removal
- Synthetic-blend pleated media
- Select 2001-2019 GM and Hummer fitment
- Capacity and burst strength tested
The HP-3003 brings the same K&N design to select Chevrolet, GMC and Hummer vehicles from 2001 to 2019. Its listing title gives that date range but does not name the engine, so treat this as a filter to verify rather than assume. Use the Amazon fit checker with your exact truck and engine, and check the result against your VIN or the number on your current filter.
The feature list matches K&N’s other HP filters. The media is pleated synthetic blend, the filter is designed for high flow, and K&N says it is laboratory tested for capacity and burst strength. It is designed for synthetic, conventional and blended oils, so you can keep using the grade your manual lists. The welded nut on the end lets you take it off with a socket rather than a band wrench.
That nut is the main reason to choose it over a plain factory-style can, especially on a heavy duty truck where the filter sits low and hot. If the fit checker doesn’t confirm it for your diesel, pass on it and use a PF2232 match like the Doc’s Diesel filter below. Either way, change it with the oil on your manual’s schedule.
4. Doc’s Diesel Oil Filter: PF2232 Replacement 12-Pack for 2001-2019 6.6L Duramax

- Replaces ACDelco PF2232
- 2001-2019 Silverado and Sierra 2500HD/3500HD
- 25 microns at 99% (third-party test)
- Box of 12 filters
Doc’s Diesel sells this filter as a direct replacement for ACDelco PF2232, the spin-on number GM used on the 6.6L Duramax for close to two decades. The listing also crosses it to GM 88917036, WIX 57202, Baldwin B1441 and Purolator L35399. It confirms fit for 2001-2019 Silverado and Sierra 2500HD and 3500HD with the 6.6L, plus Kodiak and Topkick medium trucks and 2006-2016 Express and Savana vans with the same engine.
The listing states a rating of 25 microns at 99% efficiency in third-party testing, using high-flow synthetic media that works with synthetic, conventional or blended oil. It also says the filter is tested for capacity and burst strength. The box holds 12 filters, which is a lot for one driver but practical for a small fleet or an owner who plans to keep a truck for years.
On interval, the listing suggests 5,000 to 7,000 miles and tells you to follow the engine maker’s schedule first, which is the right order. Trucks from 2020 on with the L5P use PF26 instead, so this pack isn’t for them. Check your VIN before you buy a dozen of anything.
View Doc's Diesel PF2232 Cross on Amazon

5. Motorcraft FL-2016: Genuine Cartridge Oil Filter for 6.0L and 6.4L Power Stroke

- Genuine Motorcraft part
- Part number FL2016-LX
- Cartridge element
- Built to Ford fit, form and function specs
The 6.0L and 6.4L Power Stroke don’t use a spin-on can. They use a paper element that drops into a housing on top of the engine, under a threaded cap, and FL-2016 is the Motorcraft number for that element. Cross-reference listings for those engines, such as the Doc’s Diesel filter for 2003-2010 Super Duty trucks, name FL2016 as the factory part they replace.
Motorcraft’s own listing is short. It describes a genuine Motorcraft engine oil filter, part number FL2016-LX, manufactured to meet Ford’s specifications for fit, form and function. That is the main argument for it: you get the part the engine was designed around, without needing to compare third-party micron claims. Replace the O-rings on the cap when you change the element, since a hardened seal there is a common source of seepage.
A top-mounted cartridge is easier to change than a spin-on under the truck, and it creates less waste. The listing itself doesn’t print a vehicle list, so confirm your year and engine with the Amazon fit checker and your VIN. Change it at every oil change, on the schedule your owner’s manual sets.
View Motorcraft FL-2016 on Amazon
6. Motorcraft FL-1995-A: Oil Filter Element and Gasket Kit for 1994-2003 Ford Diesel Super Duty

- Element and gasket kit
- Supersedes FL-1995 and F4TZ-6731-A
- Lists 1994-2003 F-Series, E-Series and Excursion
- Genuine Motorcraft OE replacement
The FL-1995-A is the current Motorcraft number for the filter element and gasket kit used on Ford’s 1994-2003 diesel trucks and vans, the 7.3L Power Stroke era. It supersedes the older FL-1995 and Ford part F4TZ-6731-A. The listing names a long list of applications, including F-250 to F-550 Super Duty from 1999 to 2003, earlier F-250 and F-350 trucks, E-Series vans and the 2000-2003 Excursion.
Like the newer Ford diesels, these engines use a cartridge element in a housing rather than a spin-on can. The kit includes the gasket, which is worth replacing every time on an engine this age. Motorcraft says its filters are tested under extreme conditions and engineered to screen out abrasives, and calls them the only filters recommended for Ford, Lincoln and Mercury vehicles.
Many of these trucks now have very high mileage, so a correct element and a fresh seal are cheap insurance against leaks at the housing. Check that your exact year, chassis and engine appear in the fit checker, and confirm by VIN, because the application list is long and specific. Change the element with every oil change your manual lists.
View Motorcraft FL-1995-A on Amazon
Filter Numbers by Engine Family
Choosing the best oil filter for diesel trucks gets easier once you know your engine family.
| Filter | Engine family (per listing) | Type | Worth a look if |
|---|---|---|---|
| Fleetguard LF3972 | 5.9L and 6.7L Cummins, Dodge light duty | Spin-on, 3-pack | You want the Cummins Filtration version of 5083285AA |
| K&N HP-4003 | Select 1989-2022 Ram and Dodge | Spin-on with wrench-off nut | Your old filter is hard to grip |
| K&N HP-3003 | Select 2001-2019 Chevrolet, GMC, Hummer | Spin-on with wrench-off nut | The fit checker confirms it for your GM diesel |
| Doc’s Diesel PF2232 cross | 2001-2019 6.6L Duramax | Spin-on, 12-pack | You service one truck for years, or several |
| Motorcraft FL-2016 | 6.0L and 6.4L Power Stroke | Cartridge element | You want the factory Ford part |
| Motorcraft FL-1995-A | 1994-2003 7.3L Power Stroke era | Cartridge element and gasket | You keep an older Super Duty or Excursion running |
If two filters both list your engine, either is a reasonable choice. The best oil filter for your truck is simply the correct number, changed on time, with the oil grade the maker specifies.

Diesel Trucks in a Grand Rapids Winter
Thick oil on a January morning in West Michigan takes longer to reach the turbo and bearings. A block heater cuts that strain, and our guide to the best engine block heater for diesel trucks covers the cords and elements for each engine.
Long idling adds fuel and soot to the oil without adding miles. Many manuals treat heavy idling, towing and short trips as severe service, which shortens the interval. For the difference between normal and severe service schedules, see how often to change oil.

Check your manual for a winter viscosity, and see our roundup of the best motor oil for cold weather starts. Even the best oil filter for diesel trucks can’t make up for oil that is too thick to flow at start-up.
When a New Filter Won’t Fix It
A fresh filter won’t cure low oil pressure, a coolant leak into the oil or fuel dilution from a sticking injector. Milky oil, a rising oil level between changes or a pressure gauge that drops at hot idle all point to a problem inside the engine.

For stuck caps and cans, see our guide to the best oil filter wrench for big trucks and tight bays. If you’d rather hand the job off, our oil change service in Creston handles foreign and domestic vehicles, pickups included, and we look for leaks and worn hoses while the truck is in the bay.
More Buying Guides
Frequently Asked Questions
Can I put a gas engine oil filter on my diesel truck?
Only if it is the number listed for your diesel engine. Diesel filters are usually larger, with media and valves sized for the engine’s oil volume and soot load. A filter that threads on but is meant for a gas engine may have the wrong bypass setting or capacity.
Is an aftermarket filter as good as Mopar, ACDelco or Motorcraft?
A quality aftermarket filter listed for your engine is a reasonable choice. Fleetguard, for example, lists the LF3972 as a replacement for Chrysler 5083285AA. Stick with makers that publish a clear filter number and fitment, and confirm by VIN.
How often should I change the oil filter on a diesel pickup?
Every time you change the oil, on the schedule in your owner’s manual. Towing, heavy idling and short winter trips often count as severe service, which means a shorter interval. A filter’s mileage rating describes its capacity, not your truck’s schedule.
Do I need a bypass oil filter on my diesel?
No. A bypass filter is an optional add-on that cleans a small share of the oil more finely. Your engine still needs its full-flow filter, changed on schedule, and most trucks run their whole life without a bypass kit.
Rather skip crawling under a heavy duty pickup with a drain pan? Give our Creston shop a call at 616-279-3832 any weekday from 8am to 5pm, or send us a booking request online.
If your truck is busy during work hours, bring it to 456 Carrier St NE in Grand Rapids after we close and use our after-hours drop-off, with a note on the dash about the service you want.
