456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Tire Swaps to Brake Checks: The Best Car Jack for DIY Work at Home

best car jack for diy: artistic close-up shot of a metallic ratchet tool bathed in colorful lights

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

The scissor jack in your trunk will get a flat tire changed on the shoulder, but it is slow, wobbly and tiring to use every weekend. The best car jack for DIY work at home is a hydraulic floor jack sized to your car, light enough to roll out without a fight and paired with a set of jack stands.

This guide explains how the common jack types compare, which numbers on a listing matter for a home garage and six jacks that suit first-time and weekend mechanics. If you are putting together your first kit, our list of car maintenance tools for beginners shows what else belongs next to the jack.

Quick answer

What kind of jack should a home mechanic buy?

For most cars, a 2 ton steel floor jack with about 13 inches of lift does the job, and buying it with stands is the easy start, as with the DNA Motoring kit. The Powerbuilt U-Jack makes stand placement simpler, and the AV Steel 3 ton adds reach for crossovers and SUVs.

Our Quick Picks

Three jacks that cover the most common home garage setups; all six are reviewed below.

DNA Motoring 2 Ton Jack and Stands Kit product photo
Starter kit

DNA Motoring 2 Ton Jack and Stands Kit

2 ton jack + 2 stands, 5.1-13 in.

Jack and matching stands in one box for a first garage setup.

SuitsCompact and midsize cars
View on Amazon →
Powerbuilt 2 Ton U-Jack product photo
Easy stand placement

Powerbuilt 2 Ton U-Jack

2 ton, 4.5-18.75 in.

A slotted saddle lets the stand go right where the jack lifts.

SuitsUnibody cars, crossovers
View on Amazon →
AV Steel 3 Ton Floor Jack product photo
More reach

AV Steel 3 Ton Floor Jack

3 ton, 5.5-18.5 in.

Extra height and capacity for a household with an SUV.

SuitsSUVs, minivans, standard pickups
View on Amazon →

Floor, Bottle or Scissor: Which Jack Type Suits Home Repairs

Three kinds of jack show up in most garages, and each one earns its place for a different reason. The scissor jack that ships with the car is built for roadside flats, and its slow crank and narrow base make it a poor fit for regular work.

A bottle jack lifts straight up with plenty of capacity, which suits tall trucks, but many cars sit too low for one. A floor jack, or trolley jack, rolls on casters and reaches under the car on a long arm, which is why it is the everyday choice for home work.

Reading a Jack Listing: The Numbers That Matter at Home

Capacity is the first figure most buyers look at, yet it is rarely the one that causes trouble. A floor jack raises one corner or one end of the vehicle, so a 2 ton rating covers most compact and midsize cars. A 3 ton jack gives extra margin for crossovers, minivans and SUVs, and it usually brings a taller lift as well.

Minimum and maximum height deserve more of your attention. Measure from the floor to the jacking point on your car, then add the few inches needed to clear a tire from the ground. A jack that starts at 5 inches slides under most stock sedans, while lowered cars need a lower entry, which our guide to the low profile floor jack for cars with tight clearance covers in detail.

Weight matters in a small garage: a 20 pound jack hangs on a wall, while a 60 pound one needs floor space. Look for overload and bypass valves and the ASME PASE standard on the listing.

Best Car Jack for DIY Garages: Six Jacks Examined

The capacity and height figures below come from each maker’s page or the Amazon listing, not from our own testing. Compare them with your vehicle’s jacking points and axle weights before you order.

1. DNA Motoring 2 Ton Car Jack and Stands Kit: Floor Jack with Two Ratchet Stands

DNA Motoring 2 Ton Jack and Stands Kit product photo
Key features
  • 2 ton (4,000 lb) floor jack
  • 5.1 to 13 in. lift range
  • Two ratchet stands, 11 to 17 in.
  • Overload protection valve

This kit puts a 2 ton steel floor jack and a pair of ratchet jack stands in one box, which solves the most common mistake new home mechanics make: buying a jack and putting off the stands. According to the listing, the jack rises from 5.1 to 13 inches, and the stands adjust from 11 to 17 inches with a 2 ton rating to match.

The jack rolls on large steel front wheels with swivel casters at the back, and an overload valve stops it lifting beyond its rating. The stands use a sawtooth ratchet bar with a locking lever and a wide pyramid base, so setting them at the right height takes a few seconds. The large saddle gives a stable contact patch on a frame rail or reinforced lift point.

For a sedan, hatchback or small crossover, this covers tire rotations, brake pad checks and oil changes without a second purchase. The maker states plainly that it is not recommended for pickups, trucks or large SUVs, and 13 inches of lift will run short on taller vehicles. If your driveway holds only cars, it is a tidy, sensible way to start lifting at home.

View DNA Motoring 2 Ton Jack and Stands Kit on Amazon

2. Powerbuilt 2-Ton Garage U-Jack: 4.5 to 18.75 in. Lift with Slotted Stand Saddle

Powerbuilt 2 Ton U-Jack product photo
Key features
  • 2 ton capacity
  • 4.5 to 18.75 in. lift range
  • Slotted saddle accepts a jack stand
  • Meets ASME and PALD standards

The U-Jack solves a problem that frustrates many first-time DIYers on unibody cars: the jack takes up the only factory lift point, so there is nowhere sensible to put the stand. Powerbuilt’s answer is a U-shaped saddle. You lift at the approved point, slide a jack stand into the slot so it meets the same spot, then lower the jack and the car settles onto the stand.

The listing gives a lift range of 4-1/2 to 18-3/4 inches with a 2 ton rating, which reaches most passenger cars, crossovers and many SUVs. It also works as an ordinary floor jack when you lift at a frame rail or crossmember. Powerbuilt states it meets ASME and PALD standards and carries a one year factory warranty.

This suits owners who work on newer unibody vehicles and want to keep the stand on the reinforced pinch weld instead of guessing at a nearby panel. The slotted saddle needs a stand with a head that fits it, so check your stands first. Anyone lifting heavy trucks will want more capacity than 2 tons. For many owners of newer cars, that one feature makes it the best car jack for DIY stand placement.

View Powerbuilt 2 Ton U-Jack on Amazon

drone shot of a winding road flanked by lush forest and serene lake waters

3. AV Steel 3 Ton Floor Jack: 6,000 lb Steel Jack with 5.5 to 18.5 in. Lift

AV Steel 3 Ton Floor Jack product photo
Key features
  • 3 ton (6,000 lb) capacity
  • 5.5 to 18.5 in. lift range
  • Built-in overload safety valve
  • Meets ANSI/ASME PASE standards

When the household includes an SUV, minivan or standard half-ton pickup, a short 2 ton jack often tops out before the tire leaves the floor. This AV Steel model is rated for 3 tons and, per its listing, lifts from 5.5 to 18.5 inches, which gives that extra reach with margin on capacity. It uses a single piston pump, so it takes more strokes than a dual piston design.

The maker is unusually direct about the trade-offs. The jack weighs 63.8 pounds, it is not meant for lifted trucks, heavy-duty pickups or RVs, and an adapter is recommended for EV lift points. A large 360 degree saddle, rear swivel wheels and a built-in overload valve round out the design, and it is listed as meeting ANSI/ASME PASE standards.

This fits a garage where the jack lives on the floor and rolls to every vehicle in the driveway. The 5.5 inch starting height can be too tall for a low sports car or a sedan with a deep front lip. Anyone who needs to carry the jack often may find the weight a chore. Measure your lowest vehicle before you rely on it as the only jack in the garage.

View AV Steel 3 Ton Floor Jack on Amazon

4. ARCAN A20013: 2 Ton Steel Low Profile Compact Floor Jack with Carry Handle

ARCAN A20013 2 Ton Compact product photo
Key features
  • 2 ton (4,000 lb) capacity
  • 5 to 13.1 in. lift (maker page)
  • Built-in carry handle, 19.84 lb
  • Bypass and overload valves

ARCAN’s A20013 is a compact steel jack aimed at garages where floor space is short. The ARCAN A20013 product page lists a 2 ton capacity, a minimum height of 5 inches, a maximum of 13.1 inches and a weight of 19.84 pounds. That weight is low for a steel jack, so it can be carried by its built-in handle and stored on a shelf or hook.

Rear swivel casters let you nudge the saddle under the lift point without dragging the whole jack around. Bypass and overload valves protect the hydraulics from over-extension and over-capacity use, and the maker states the jack complies with ASME PASE-2019. ARCAN backs it with a one year warranty.

It makes sense for an apartment-style garage or a shared space where a long trolley jack would be in the way. Tire swaps and brake checks on compact and midsize cars are within its reach. The 13.1 inch maximum will be short for most SUVs and trucks, and the 5 inch entry height may not clear a lowered car. Pair it with stands rated for your car, since a compact jack is no more suited to holding a load than a full-size one.

View ARCAN A20013 2 Ton Compact on Amazon

serious adult bearded mechanic in workwear standing on trunk of car and checking details with ratchet while wo

5. Pro-LifT F-757G: 2 Ton Hydraulic Trolley Floor Jack with 3-5/8 in. Low Entry

Pro-LifT F-757G 2 Ton product photo
Key features
  • 2 ton (4,000 lb) capacity
  • 3-5/8 to 13-3/8 in. lift range
  • Overload bypass valve
  • Large swivel saddle

Pro-LifT built the F-757G for home garage use, and its main draw is a low starting height. The listing gives a lift range of 3-5/8 to 13-3/8 inches with a 4,000 pound rating, so the saddle slides under many sedans and coupes whose jacking points sit too low for a 5 inch jack. It is still a conventional steel trolley jack, not a long-chassis racing design.

Two large steel front wheels and two rear casters that turn a full circle make it easy to steer under the car. A built-in bypass device protects the hydraulics from over-pumping, and an overload valve guards against lifting past the rating. Before first use, Pro-LifT advises pumping the handle six to eight full strokes to purge trapped air. That simple step helps the jack lift smoothly from the start.

This one suits a sedan owner whose car is a little low for the cheapest jacks but who does not need racing aluminum. A compact body and carry handles make it easy to store. Like the other 2 ton jacks here, it does not lift high enough for most trucks, and the one year warranty is standard for the class.

View Pro-LifT F-757G 2 Ton on Amazon

6. Big RED 2 Ton Hydraulic Trolley Floor Jack: 4,000 lb Jack with Storage Case

Big RED 2 Ton with Case product photo
Key features
  • 2 ton (4,000 lb) capacity
  • Up to 13 in. maximum lift
  • Blow mold storage case
  • Safety bypass system

Big RED’s 2 ton trolley jack ships in a blow mold plastic case, which keeps it clean and makes it easy to store in a closet or carry in the trunk on a long trip. The listing rates it at 4,000 pounds with a maximum height of 13 inches. It gives the minimum as 5-3/5 inches in the bullets and 5.3 inches in the title, so measure your clearance with a little margin.

The frame is heavy-duty steel with two large steel casters and two 360 degree swivel casters for positioning. A safety bypass system prevents overloading, and the maker includes a one year limited warranty. The case holds the handle too, so nothing rattles loose when you move it.

This is a practical pick for someone without a permanent workbench or wall space, or for anyone who wants a proper jack in the car instead of relying on the factory scissor jack. It handles most cars, and the listing describes it as ideal for them. Taller SUVs and pickups will need a jack with more lift. Keep the case closed in a cold garage so grit stays away from the ram and the release valve.

View Big RED 2 Ton with Case on Amazon

Six DIY Jacks Compared at a Glance

The table lines up the six jacks by listed capacity and lift range so you can match them to your driveway.

JackListed capacityListed lift rangeSuits
ARCAN A200132 ton (4,000 lb)5 to 13.1 in.Small garages, wall storage
DNA Motoring kit2 ton, plus 2 ton stands5.1 to 13 in.First jack and stands together
Pro-LifT F-757G2 ton (4,000 lb)3-5/8 to 13-3/8 in.Sedans with lower jacking points
Powerbuilt U-Jack2 ton4.5 to 18.75 in.Unibody cars and taller crossovers
Big RED 2 Ton with case2 ton (4,000 lb)About 5.3 to 13 in.Storage in a closet or the trunk
AV Steel 3 Ton3 ton (6,000 lb)5.5 to 18.5 in.SUVs, minivans, standard pickups
Figures as stated by the maker or the Amazon listing. The Big RED listing quotes a minimum of 5-3/5 in. in one place and 5.3 in. in its title.
winding road through Iceland's rugged landscape with cloudy skies and snowy mountains

For one sedan, any 2 ton jack here will do. With a crossover or SUV in the mix, the extra height of the U-Jack or the AV Steel 3 ton saves you from stacking blocks under a short jack.

Lifting Safely: Stands, Chocks and a Grand Rapids Garage Floor

A jack lifts the car; stands hold it. Seals can let a jack creep down, so nothing goes under the car until it rests on rated stands.

  1. Park on flat concrete, set the parking brake and chock the wheels that stay down.
  2. Find the lift point in your owner’s manual and center the saddle under it, with a rubber pad on a pinch weld.
  3. Pump until the tire clears the floor by an inch or two, then slide a stand under the nearest solid support point.
  4. Open the release valve slowly so the car settles onto the stand, and leave the jack lightly touching as a backup.
craftsman working inside a traditional workshop

Grand Rapids winters bring their own hazards to a home garage. Slush and road salt drip off the wheel wells and leave the floor wet, and wet concrete lets a jack skid, so mop the area first. Cold also thickens hydraulic oil, which makes the first strokes feel slow, and a jack that stays spongy usually has air inside. Powerbuilt’s step-by-step guide to bleeding a floor jack walks through clearing it.

For the twice-a-year winter tire swap, pair the jack with a torque wrench, and our torque wrench for lug nuts guide explains what to look for.

When a Home Jack Is Not Enough

Jobs that need the whole car high and level, or a long look at the exhaust and fuel lines, are safer on a two-post lift. If you spot heavy rust, a leak or a torn boot while the car is up, have it checked before the next round of salt.

stunning aerial capture of a winding road beside a tranquil lake with lush green hills

When the next interval in your owner’s manual comes due, our factory scheduled maintenance service in Grand Rapids covers those checks with the car on a lift.

Frequently Asked Questions

What is the best car jack for DIY use on a small budget?

A 2 ton steel floor jack is the usual starting point, because it covers most cars and costs less than aluminum. Buying it as a kit with stands, like the DNA Motoring set, means you have safe support from the first job.

Can I use the jack that came with my car for maintenance?

It is designed for changing a flat at the roadside. Its narrow base and slow crank make it a poor fit for regular garage work, and you should never get under a car held only by it.

Is a 2 ton jack enough for an SUV?

Capacity is often fine, since the jack lifts only one corner, but height is the problem. Many SUVs need 15 inches or more to clear a tire, so a jack like the Powerbuilt U-Jack or a 3 ton model with 18 inches of lift is a better match.

Some jobs are easier on a lift than on your garage floor. Call 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or send us a booking request online.

If your workday overlaps our hours, the after-hours drop-off lets you leave the car with us at 456 Carrier St NE and pick it up once the work is done.