As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Prius parked on the street overnight is an easy target, because a thief with a battery-powered saw can cut out the converter in minutes. The best catalytic converter shield for Prius owners is a plate built for your exact generation, held on with security fasteners, and installed so it still lets the exhaust breathe.
Below we cover why these cars get hit and how to match a shield to your model year, then review six shields from Miller CAT and Cat Security that cover the 2004 to 2026 Prius, plus the Prius C and Prius V.
Quick answer
Which cat shield should I put on my Prius?
Buy the shield listed for your generation. A 2004-2009 car takes the Cat Security Gen 2 plate, a 2010-2015 car the Miller CAT Gen 3 stainless shield, a 2016-2022 car the Miller CAT V2 or Cat Security plate, and a 2023 or newer car the Miller CAT Gen 5 shield.
Our Quick Picks
Three quick picks for the Prius generations thieves target most and the newest cars on the road. All six shields are reviewed below.

Cat Security Prius 2004-2009 Shield
A light aluminum plate for the generation thieves target most.

Miller CAT V2 Gen 4 Stainless Shield
A stainless two-piece kit that also covers the Prius Prime.

Miller CAT Gen 5 Aluminum Shield
A model-specific plate for the newest Prius and Prime.
Why Thieves Crawl Under a Prius
Hybrid converters hold more platinum, palladium and rhodium than most, because the gas engine shuts off often and the catalyst runs cooler. That makes the part worth more to a scrap buyer, and thieves know which cars carry the richer units.
The Highway Loss Data Institute found that theft claim frequency for 2004-09 Prius models was more than 40 times higher in 2020 than in 2016. The same report notes that converters carry no vehicle identification number, so a stolen one is hard to trace once it is sold. A shield does not make theft impossible, but it turns a quick cut into a slow, noisy job that most thieves skip.
A theft also damages the pipes and sensor wiring around the cut. If your car has already been hit, our guide to the best aftermarket catalytic converter options explains the federal and CARB rules for the replacement.
Matching a Shield to Your Prius Generation
Each Prius generation has a different underbody, so a plate made for one will not bolt onto another. The Prius C (2012-2019) and Prius V (2012-2017) are separate cars underneath, and if you drive a Prius Prime, make sure the listing names it.
Material is the next choice. Aluminum is light and does not rust, though it is softer and can scratch or dent on a curb. Stainless steel is heavier and takes longer to cut, which matters if theft is common where you park. Look for these points:
- Fit: a stated model year range and body style, using factory mounting points.
- Fasteners: tamper-resistant screws or nuts that need a special bit to remove.
- Ventilation: vent holes or louvers so heat does not build up around the converter and sensors.
- Service access: a plate that can be removed with the key bit for an oil change or exhaust work.
Best Catalytic Converter Shield for Prius: Six Plates Reviewed
The six shields run in model year order, with the Prius C plate last. Fit details come from each Amazon listing, so confirm your year, body style and trim on Amazon before you order.
1. Cat Security Prius 2004-2009: Aluminum Catalytic Converter Shield with Security Hardware

- Listed for the 2004-2009 Toyota Prius
- Aluminum plate, corrosion resistant
- Uses factory mounting points, no welding
- Heat extraction holes and visible CCM logo
Cat Security’s plate for the 2004-2009 Prius covers the second-generation car, the model year range that insurance data has tied most closely to converter theft. It is a model-specific aluminum shield rather than a universal cage, so it follows the shape of this generation’s underbody and attaches at the factory mounting points. Check that your car falls inside the listed years before you buy, since the third-generation car uses a different plate.
The listing highlights security hardware that needs special tooling to remove, which is the part that slows a thief down. Aluminum keeps the weight low and resists corrosion, a useful trait on a car that sees salted roads every winter. Heat extraction holes let the exhaust area vent, and a CCM logo sits where an inspector can see it during an emissions check.
No welding is needed, so the shield can come off again with the right bit for exhaust or underbody service. It suits owners of an older Prius who park on the street, in a driveway or in a shared lot. It does not suit a 2010 or newer Prius, the Prius C or the Prius V, and it does not repair any exhaust damage left by an earlier theft attempt.
View Cat Security Prius 2004-2009 Shield on Amazon
2. Miller CAT Cat Shield Gen 3: 304 Stainless Steel Shield for 2010-2015 Prius

- Fits 2010-2015 Gen 3 Prius and 2012-2017 Prius V
- 16 gauge 304 stainless steel
- Drill-less V2 design, tamper-proof screws
- No spacers or noise dampeners needed
Miller CAT’s Gen 3 Cat Shield is made for the 2010-2015 Toyota Prius, and the listing also covers the 2012-2017 Prius V with its original converter. That makes it one of the few plates that protects both the liftback and the wagon.
The shield is cut from 16 gauge 304 stainless steel, which takes noticeably longer to saw through than aluminum. This listing is the maker’s V2 version, which is drill-less and secured with stainless tamper-proof screws, so there are no new holes in the floor pan. Miller CAT says it does not need spacers or noise dampeners to keep it from rattling. The listed tools are a 1/4 inch bit driver and 10mm, 12mm and 14mm sockets.
Miller CAT recommends a professional install and asks buyers to check fit and specs before ordering, since a plate this size has to line up with factory points under the car. It suits owners who want the extra cut resistance of steel and do not mind a heavier plate. It is not meant for a 2004-2009 car, a 2016 or newer Prius, or a Prius C, and the listing notes the shield may have surface marks.
View Miller CAT Gen 3 Stainless Shield on Amazon

3. Cat Security Prius 2016-2022: Lightweight Aluminum Converter Protection Shield

- Listed for the 2016-2022 Toyota Prius
- Aluminum, lighter than steel plates
- Factory mounting points, no welding
- Heat extraction holes for ventilation
Cat Security’s 2016-2022 Prius shield is the aluminum choice for the fourth-generation liftback. Like the brand’s Gen 2 plate, it is shaped for one generation and fastens at the factory mounting points with included security hardware that needs special tooling to remove.
The listing stresses weight. Aluminum is lighter than the other common shield materials, which matters on a car built for fuel economy, and it is corrosion resistant, so the plate itself will not rust through after a few West Michigan winters. Heat extraction holes are placed to let air move around the converter, so heat from the exhaust does not build up under the cover.
No welding is involved, and the plate can be removed with the matching bit for an oil change or exhaust repair. It suits Gen 4 owners who want solid protection without adding much weight under the floor. Buyers who park in a high-theft area may prefer a stainless plate, since aluminum cuts faster. It does not fit the 2023 and newer Prius, and the listing does not state Prius Prime fit, so Prime owners should look at a plate that names their car.
View Cat Security Prius 2016-2022 Shield on Amazon
4. Miller CAT Cat Shield V2 Gen 4: Stainless Steel Shield with Front Plate for 2016-2022 Prius

- Fits 2016-2022 Prius Liftback and Prius Prime
- 16 gauge 304 stainless steel
- Extra front shield, no separate brace needed
- Drill-less, tamper-proof stainless screws
The V2 Cat Shield from Miller CAT covers the 2016-2022 fourth-generation Prius Liftback and Prius Prime trims, and the listing adds the 2019-2025 Corolla Hatchback. It is made in the USA from 16 gauge 304 stainless steel and carries the OEM authorized accessory label.
This version includes an additional front shield, and Miller CAT says that removes the need to buy a separate reinforcement brace that some other shields require for this generation. Installation is drill-less, using stainless tamper-proof screws that let the shield come off for service but resist quick removal. The listing also says the V2 design does not need spacers or noise dampeners. Tools listed are a trim removal tool or flat screwdriver, 10mm and 12mm sockets and a ratchet.
As with its other shields, Miller CAT recommends hiring a professional for the install and checking fitment before purchase. This kit suits owners who park outside, in apartment lots or at work all day and want the slower cut of steel. It is heavier than an aluminum plate, and it does not fit a Gen 3 or Gen 5 Prius, a Prius C or a Prius V.
View Miller CAT V2 Gen 4 Stainless Shield on Amazon

5. Miller CAT Cat Shield Gen 5: Aluminum Shield for 2023-2026 Prius and Prius Prime

- Fits all 2023-2026 Gen 5 Prius and Prius Prime trims
- Premium-grade aluminum plate
- Stainless tamper-proof screws
- Completely drill-less install
For the newest Prius, Miller CAT’s Gen 5 shield is listed for all 2023-2026 Prius Liftback and Prius Prime trims with original converters. Newer cars can still draw thieves, so a plate shaped for this body is worth a look. The shield is designed and made in the USA and labeled as an OEM authorized accessory product.
The plate is premium-grade aluminum held on with stainless steel tamper-proof screws. The listing describes the install as completely drill-less, so the factory floor stays intact and the shield can come off with the right bit for service. Required tools include 10mm, 12mm and 14mm sockets, a 1/4 inch socket for a 3/8 ratchet and a bit driver, all common in a home tool kit.
Aluminum keeps weight down and will not rust, which suits a daily commuter that sees months of salted roads. Miller CAT recommends a professional install and asks buyers to confirm fitment before ordering. Owners who want stainless steel on a Gen 5 car can find a stainless version from the same maker. This plate does not fit any Prius built before 2023, and the listing notes it may arrive with small surface marks.
View Miller CAT Gen 5 Aluminum Shield on Amazon
6. Cat Security Prius C 2012-2019: Marine Grade Aluminum Shield with Mounting Bar

- Listed for the 2012-2019 Prius C
- Main shield, mounting bar and security hardware
- Marine grade aluminum, made in the USA
- Vented design with inspection port
The Prius C is a smaller car than the regular Prius underneath, so it needs its own shield, and Cat Security lists this one for the 2012-2019 Prius C. The kit includes the main converter shield, a mounting bar and the brand’s security hardware, so there is nothing extra to source before the install.
Cat Security builds the plate in the USA from marine grade aluminum and calls it corrosion resistant and smog compliant. The listing describes a vented design meant to release heat and protect the converter and oxygen sensors, and it says all of the brand’s shields include a CARB compliant inspection port. Those features help on a small car where the converter sits close to the floor and the sensors.
No welding is required, the shield uses factory mounting points, and full step-by-step instructions come in the box. That makes it a reasonable job for a confident home mechanic with ramps or a lift, though a shop with a lift makes the job simpler. It suits Prius C owners who park outside or commute to a lot each day. It does not fit the standard Prius, the Prius V or the Prius Prime.
View Cat Security Prius C Shield on Amazon
Prius Shields at a Glance
| Shield | Prius fit | Material | Install notes |
|---|---|---|---|
| Cat Security Gen 2 | 2004-2009 Prius | Aluminum | Factory mounting points, security hardware, no welding |
| Miller CAT Gen 3 stainless | 2010-2015 Prius, 2012-2017 Prius V | 16 gauge 304 stainless | Drill-less, tamper-proof screws |
| Cat Security 2016-2022 | 2016-2022 Prius | Aluminum | Factory mounting points, no welding |
| Miller CAT V2 Gen 4 | 2016-2022 Prius and Prius Prime | 16 gauge 304 stainless | Drill-less, extra front shield included |
| Miller CAT Gen 5 | 2023-2026 Prius and Prius Prime | Aluminum | Drill-less, tamper-proof screws |
| Cat Security Prius C | 2012-2019 Prius C | Marine grade aluminum | Mounting bar included, no welding |

Road Salt, Snow and the Plate Under Your Car
A West Michigan winter is hard on anything bolted under a car. Salt brine collects between the plate and the floor pan, and steel fasteners can seize to aluminum over a few seasons. A light coat of anti-seize on the bolts during install, and a rinse under the car after the salt season, makes the shield much easier to remove later.
Packed snow and slush can also sit on top of a plate and block the vents. Knock it loose when you clear the car. If the factory floor and exhaust hangers are already rusty, our review of the best undercoating for hybrids covers products that are safe around high-voltage cables.

A shield should not rattle. If you hear a buzz at idle or on rough roads after an install, a fastener may be loose or a corner may be touching the exhaust. Have it checked before a vibration wears through a pipe or a heat shield, since a small leak near the converter can also upset the oxygen sensor readings and set a code.
Installing a Shield and When to Call a Shop

Most of these plates bolt on with basic sockets and the supplied security bit, but the work is done on your back under a low car. Miller CAT itself recommends a professional install.
Our exhaust repair in Grand Rapids service can fit a shield you bring in, check the pipes and hangers while the car is up, and repair damage left by an attempted theft. For a small leak away from the converter, our guide to the best exhaust repair kit choices shows which patches hold up as a short-term fix. Keep the security bit in the glovebox, so whoever services the car next can remove the plate.
If the converter was already cut or the check engine light came on after a theft attempt, read our page on bad catalytic converter symptoms and have the system checked before you add a new plate. Fitting the best catalytic converter shield for Prius protection over a damaged exhaust only hides the problem.
More Buying Guides
Frequently Asked Questions
Which Prius years are targeted most by converter thieves?
The second-generation 2004-2009 Prius has drawn the most attention. HLDI found its theft claim frequency rose more than 40 times between 2016 and 2020, while 2010-2015 models saw only slight increases. Any hybrid parked outside can still be a target.
Is aluminum or stainless steel better for a Prius cat shield?
Aluminum is lighter and does not rust, which suits salted roads. Stainless steel is heavier and slower to cut through. Both work when the plate is made for your generation and fastened with security hardware.
Will a cat shield make my Prius overheat or fail inspection?
A shield made for your model uses vent holes so heat can escape, and the makers design them around the converter and sensors. Cat Security lists an inspection port on its plates. Keep the vents clear of packed snow and debris.
Can I install a Prius catalytic converter shield myself?
Many owners do, using the supplied bit and common sockets, but it means working under a low car. Miller CAT recommends a professional install, and a shop with a lift can also inspect the exhaust while the car is up.
Want a shield fitted before the next theft wave reaches your street? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up an exhaust appointment on our contact page.
Busy during shop hours? Bring the Prius and its new plate to 456 Carrier St NE after we close and leave them with our after-hours drop-off.
