As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The Z badge covers three very different cars: the 350Z, the 370Z and the twin-turbo Nissan Z that arrived for 2023. The best exhaust for Nissan Z owners is a cat-back built for your exact generation, in a material that shrugs off road salt and with a sound you can live with on a long highway drive.
Below we sort out fitment first, then look at six cat-back systems across all three generations. If you are weighing a simple muffler swap instead of a full system, our guide to choosing an aftermarket muffler covers that route.
Quick answer
Which exhaust should I buy for my Nissan Z?
Match the system to your generation first. For the 2023 and newer Z, the MBRP Armor Pro and AWE Touring Edition are stainless cat-backs built for the 3.0L twin-turbo. On a 370Z, the Borla 140313 and Invidia Gemini fit most non-NISMO cars, and the Invidia N1 suits the 350Z.
Our Quick Picks
Three cat-backs that cover each Z generation: one for the 2023 and newer Z, one for the 370Z and one for the 350Z.

MBRP Armor Pro Nissan Z Cat-Back
A stainless cat-back with a deeper note than stock.

Borla 140313 370Z Cat-Back
A US-made stainless cat-back for most 370Z coupes and roadsters.

Invidia N1 350Z Cat-Back
A stainless dual-exit system for the first-generation Z.
Know Your Z Before You Shop
Each generation uses its own engine, pipe routing and rear bumper, so a cat-back for one will not bolt onto another. The 350Z (Z33) runs a 3.5L V6, the 370Z (Z34) a 3.7L V6, and the current Z (RZ34) a 3.0L twin-turbo V6. Nissan’s Z specifications page lists 400 horsepower for the Sport and Performance trims and 420 for the NISMO.
Trim matters too. Several 370Z systems exclude the NISMO, whose rear fascia and pipe layout differ, and some RZ34 listings name only rear-wheel-drive US cars. Read the fitment line on the listing, then confirm your year, model and engine on Amazon before you order. No single listing fits every Z.
What Separates a Good Z Cat-Back From a Noisy One
A cat-back replaces everything behind the catalytic converters, which leaves the converters and oxygen sensors in place. Within that layout, a few details decide how the car feels to live with:
- Material: T304 stainless steel resists rust far better than aluminized pipe, which counts on salted roads.
- Resonators and crossover pipes: an X-pipe, H-pipe or resonated mid-section helps tame drone at highway cruising speed.
- Pipe diameter: bigger is not always better on a naturally aspirated VQ engine; follow what the maker designed for your car.
- Tips: size and finish should suit the bumper cutouts, so check tip diameter against your trim.
Sound is personal, and makers describe it in their own terms. Treat any claimed horsepower gain as the maker’s number for its test car rather than a promise for yours.
Best Exhaust for Nissan Z: Six Cat-Backs Reviewed
The picks run from the newest Z back to the 350Z. Check the generation line in each review before you click through.
1. MBRP Armor Pro S4408304: 3-Inch T304 Stainless Cat-Back with Dual 5-Inch Tips

- Listed for 2023 and newer Nissan Z 3.0L
- T304 stainless steel, 3-inch tubing
- Dual rear exit with 5-inch polished tips
- Street Profile sound, lifetime warranty
The MBRP Armor Pro cat-back is built for the current Nissan Z with the 3.0L twin-turbo V6. The Amazon listing names 2023 and 2024 cars, while MBRP’s S4408304 product page lists 2023 and later models with the 3.0L engine. Since the two sources word the years differently, confirm your model year and trim on Amazon before you order.
The system uses 3-inch tubing in T304 stainless steel, which is MBRP’s top material grade and a sensible choice for a car that may see salted roads. It exits through dual rear tips, each a 5-inch single-wall, angle-cut tip with a mirror-polished finish. MBRP places it in its Street Profile family and describes the sound as a deeper tone that is a bit louder than stock, so it is aimed at owners who want more character without a loud, raspy note.
As a cat-back, it replaces the pipes and mufflers behind the catalytic converters and leaves the converters and sensors in place. MBRP backs the Armor Pro line with a lifetime warranty and publishes installation instructions for the system. It does not suit the 350Z or 370Z, and owners chasing a loud track sound may want a more aggressive design.
View MBRP Armor Pro Nissan Z Cat-Back on Amazon
2. AWE Touring Edition: Dual 3-Inch Catback with Diamond Black Tips for RZ34 Nissan Z

- Listed for 2023 Nissan Z RZ34 RWD
- Dual 3-inch layout with X-pipe
- Resonated mid-pipes to cut drone
- 5-inch double-wall slash-cut black tips
AWE’s Touring Edition catback is the more refined of the two RZ34 systems here. The Amazon listing names the 2023 Nissan Z in rear-wheel-drive form, and AWE’s product copy, as carried by its dealers, says the line is confirmed for US models only. Check your model year and trim on Amazon before buying, since AWE sells separate versions with chrome silver or diamond black tips.
The system runs a dual 3-inch layout with an X-pipe and resonated mid-pipes. AWE says its 180 Technology resonators target the frequencies that cause drone, while the X-pipe helps cut rasp, so the goal is a fuller note under acceleration and a calmer cabin at cruising speed. This version ends in 5-inch double-wall, slash-cut tips with a diamond black finish.
AWE includes adapter plates and gaskets that mate the dual 3-inch pipes to the factory downpipes, so it bolts on behind the stock turbo hardware. The maker also publishes a dyno figure for its test car, which works best as a guide rather than a promise for your car. It is a good fit for a Z that sees long highway drives, and a poor fit for anyone who wants the loudest system available or owns an earlier generation.
View AWE Touring Edition Nissan Z Catback on Amazon

3. Borla 140313 S-Type: T-304 Stainless Dual Cat-Back for 2009-2020 370Z

- Listed for 2009-2020 370Z, except NISMO
- T-304 stainless steel, all welded
- Bolt-on installation
- Made in USA
Borla’s 140313 cat-back is listed for the 2009 to 2020 Nissan 370Z with the 3.7L V6, in coupe or convertible form and with either the automatic or manual transmission. The listing excludes the NISMO by name, so a NISMO owner needs a different part. As with any vehicle-specific system, confirm your year, body style and trim on Amazon before ordering.
The system is made from T-304 stainless steel with all-welded construction, and it is built in the USA. The Amazon listing describes it as a true dual system, and Borla places it in its S-Type sound family, which the listing calls the classic Borla sound. Installation is bolt-on, using the factory mounting points behind the catalytic converters.
Stainless steel matters on a 370Z that is now more than a few years old and may have seen many Michigan winters. A welded stainless system resists the rust that eats through aluminized pipes and mufflers, so it suits an owner who plans to keep the car for a long time. Borla’s fitment page lists 2.25-inch tubing and 4.5-inch polished stainless tips. It is not a match for the NISMO, the 350Z or the newer Z.
View Borla 140313 370Z Cat-Back on Amazon
4. Invidia Gemini HS09N7ZGIS: 60mm Cat-Back with Rolled Stainless Tips for 370Z

- Listed for 2009 and newer 370Z
- 60mm stainless piping
- 110mm rolled stainless steel tips
- Twin Gemini mufflers, one per exit
Invidia’s Gemini system for the 370Z uses two individual mufflers, one for each exit, which is where the Gemini name comes from. The Amazon listing covers 2009 and newer 370Z models, and this version, part HS09N7ZGIS, ends in rolled stainless steel tips. Invidia also sells titanium-tip versions under different part numbers, so check that the listing matches the finish you want.
The listing gives a piping diameter of 60 millimeters and a tip size of 110 millimeters. Dealer descriptions call the sound aggressive and reactive, which puts it on the sportier side of the systems in this guide. That suits an owner who enjoys hearing the 3.7L V6 work, but it may feel louder on a long drive than a system built around drone control.
Like the other 370Z picks, it is a cat-back, so it bolts on behind the catalytic converters and leaves the emissions hardware and sensors alone. Some retailers list a louder R400 muffler variant under similar names, so read the listing title carefully before ordering. Confirm your model year and trim on Amazon, especially for a NISMO, and remember that this system does not fit the 350Z or the 2023 and newer Z.
View Invidia Gemini 370Z Cat-Back on Amazon

5. DNA Motoring CBE-370Z-D-T2: 2.5-Inch T-304 Stainless Cat-Back for 2009-2019 370Z

- Listed for 2009-2019 370Z
- T-304 stainless, mandrel-bent pipe
- TIG-welded CNC-machined flanges
- 2.5-inch piping, 3.5-inch tips
DNA Motoring’s CBE-370Z-D-T2 is a budget-minded stainless cat-back for the 370Z. The Amazon listing names the 2009 to 2019 model years, so confirm your year and trim on Amazon before buying, and check NISMO coverage with the seller if that is your car. It is a practical way to replace a tired or rusted stock system with stainless steel.
The pipes are T-304 stainless steel with computer-controlled mandrel bends, which keep the inside diameter consistent through the curves. DNA uses TIG-welded, CNC-machined flanges and lists a 2.5-inch outside diameter for both the inlet and main piping, with 3.5-inch tips. The design includes low-restriction mufflers and tuned resonators, and the listing describes the tone as deep and smooth.
The listing also quotes a horsepower gain, which is a maker claim and will vary with the car, its condition and other modifications. Fit and finish on value systems can take more adjustment at the hangers and tips than on premium brands, so plan extra time to line everything up. It suits an owner who wants stainless durability and more sound for less outlay, and it does not suit the 350Z or the newer twin-turbo Z.
View DNA Motoring 370Z Cat-Back on Amazon
6. Invidia N1 HS02N3ZGTP: 60mm Stainless Cat-Back with Polished Tips for 350Z

- Listed for the 350Z through 2008
- 60mm SUS304 stainless piping
- 101mm polished stainless tips
- Dual-exit, bolts on behind the converters
The Invidia N1 is the 350Z pick in this guide. The Amazon listing names the 350Z up to the 2008 model year, which covers the Z33 sold in the US, and dealer listings describe it as a dual-exit system with polished stainless tips. Because 350Z models changed engines and bumpers during their run, confirm your year and trim on Amazon before ordering.
The listing gives a 60-millimeter piping diameter and a 101-millimeter tip size, and dealers list the construction as SUS304 stainless steel. That makes it a sound replacement for an original exhaust that has spent close to two decades on salted roads, where the stock pipes and muffler shells are often thin or patched by now. A stainless system avoids that problem coming back quickly.
On a car of this age, the hardware is often the hard part. Mounting studs and bolts at the Y-pipe joint may be rusted or seized, so soak them in penetrating oil well before the job and have replacement hardware ready. Like most aftermarket cat-backs, it typically sounds more noticeable than the factory system, so think about how that will feel on a daily commute. It does not fit the 370Z or the 2023 and newer Z.
View Invidia N1 350Z Cat-Back on Amazon
Which System Fits Which Z
Use this table as a starting point, then check the listing’s fitment details against your car. The engine code is printed on the engine cover and in your owner’s manual if you are not sure which generation you have.
| Generation | Engine | Systems in this guide | Confirm before buying |
|---|---|---|---|
| Nissan Z (RZ34), 2023 on | 3.0L twin-turbo V6 | MBRP Armor Pro, AWE Touring Edition | Trim, drive layout and model year |
| 370Z (Z34), 2009 to 2020 | 3.7L V6 | Borla 140313, Invidia Gemini, DNA Motoring | NISMO exclusion and model year |
| 350Z (Z33), up to 2008 | 3.5L V6 | Invidia N1 | Model year and tip clearance |
Choosing the best exhaust for Nissan Z daily driving usually means leaning toward a resonated system with a crossover pipe. A weekend car kept off the road in winter can carry something louder without wearing on you.

Salt, Potholes and a Low Sports Car
West Michigan winters are hard on exhaust parts. Road salt eats at clamps, hangers and any steel that is not stainless, and freeze-thaw potholes punish a car that sits as low as a Z. A stainless system with stainless hardware holds up far longer in those conditions.
If your Z is a summer car, rinse the underside before storage and look over the hangers each spring. A torn rubber isolator lets the pipes sag and knock, and a scraped muffler can crack at a seam. Our article on exhaust leak symptoms explains the ticking, fumes and fuel-economy changes to watch for.

Small leaks at a slip joint can sometimes be patched for the short term. Our roundup of the best exhaust repair kit options covers tapes, pastes and clamps, though a cracked stainless pipe on a new system usually calls for a proper repair.
When the Install Belongs in a Shop
A cat-back is a bolt-on job on paper, but a Michigan car often has flange bolts and studs that have rusted solid. Snapping a stud at the converter outlet turns an afternoon project into a drilling and repair job. Lining up a dual system so the tips sit evenly in the bumper also takes patience and a lift.

Bring the car in if you hear a new tick or rattle after installation, smell exhaust in the cabin, or see a check engine light. Our exhaust repair service in Grand Rapids handles leaks, broken hardware and full exhaust systems and mufflers, and our team works on foreign and domestic vehicles alike.
More Buying Guides
Frequently Asked Questions
Will a 370Z exhaust fit a 350Z?
No. The two generations use different engines, pipe routing and rear bumpers, so a cat-back made for one does not bolt onto the other. Buy a system listed for your exact model and year.
Will a cat-back exhaust turn on the check engine light?
A cat-back leaves the catalytic converters and oxygen sensors in place, so it normally should not. If a light appears after installation, have the codes read, since a leak near a sensor or a disturbed connector can trigger one.
Do 370Z exhausts fit the NISMO?
Not always. The NISMO has a different rear fascia and exhaust layout, and the Borla 140313 listing excludes it by name. Check the fitment line for NISMO coverage before ordering.
What is the best exhaust for Nissan Z daily driving?
Look for a stainless cat-back with resonators or a crossover pipe, which helps keep drone down at cruising speed. On the 2023 and newer Z, AWE designs its Touring Edition to cut drone, and on a 370Z the dual stainless Borla 140313 is worth a look.
Need your Z’s exhaust looked over in Grand Rapids? Reach 456 AutoFix at 616-279-3832 on weekdays from 8am to 5pm, or set up an exhaust visit through our contact page.
Short on daytime hours? Leave the car with our after-hours drop-off at 456 Carrier St NE in Creston, and we will take it from there.
