456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Which Cat-Back Is the Best Muffler for Performance Driving?

best muffler for performance driving: tranquil autumn road lined with vibrant fall foliage under a cloudy sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A car built for back roads and track days deserves an exhaust that keeps up with it. The best muffler for performance driving lets the engine breathe at high rpm, sounds right when you open it up, and still stays civil on a two-hour highway trip home. For most owners, that muffler comes as part of a bolt-on cat-back made for one car.

This guide uses three popular performance cars as reference points: the Mustang GT, the Camaro SS and the Subaru WRX. If you drive something else, our aftermarket muffler buying guide explains muffler types and pipe sizes for universal fitting.

Quick answer

What muffler setup works for hard driving on the street and track?

Choose a stainless cat-back built for your exact car. A 2018-2023 Mustang GT without active valves suits the Borla 140745. A 2010-2015 Camaro SS can run the Corsa 14968 with its no-drone design. A 2015-2021 WRX or STI fits the Borla 140595 S-Type, which Borla sells with a no-drone guarantee.

Our Quick Picks

Three quick picks, one for each reference car. All six kits are reviewed below.

Borla 140745 product photo
Mustang GT

Borla 140745

2018-2023 GT 5.0L · T-304 stainless

A bolt-on Borla cat-back for non-valved GT coupes.

SuitsMustang GTs without factory active exhaust
View on Amazon →
Corsa 14968 product photo
Camaro SS

Corsa 14968

2010-2015 SS 6.2L · X-pipe

A no-drone Corsa system with an X-pipe crossover.

SuitsFifth-generation Camaro SS owners
View on Amazon →
Borla 140595 S-Type product photo
Subaru WRX

Borla 140595 S-Type

2015-2021 WRX and STI · T-304

A Borla S-Type cat-back sold with a no-drone guarantee.

SuitsVA-chassis WRX and STI owners
View on Amazon →

What Hard Driving Asks of an Exhaust

The factory exhaust on a sporty car is a compromise. It has to pass noise rules in many markets, stay quiet for buyers who never rev past 4,000 rpm, and fit a price. Performance kits shift that balance toward flow, using larger mandrel-bent tubing and straight-through or lightly chambered mufflers.

Corsa describes its own approach plainly: a straight-through, unrestricted design reduces back pressure, while its Reflective Sound Cancellation technology reflects the low frequencies that cause drone out of phase. Other makers chase the same goal with resonators, chamber shapes or valves.

Expect modest gains from a cat-back alone. The bigger change you will notice is sound and throttle feel, and on a turbo car the turbine softens the note before it reaches the muffler.

Choosing by Car, Sound Level and Drone

Start with fitment, then decide how loud you want to be. These are the checks that matter most for the cars in this guide:

  • Active valve exhaust: 2018 and newer Mustang GTs come with or without factory valves, and kits are sold for one or the other. Camaro SS owners face the same split with the dual-mode exhaust.
  • Body style: some kits exclude convertibles or ground effects packages, so read the notes on the listing.
  • Sound label: makers rank their own kits (Borla S-Type, ATAK; Corsa Sport, Xtreme; AWE Touring, Track). Use those names rather than guessing from photos.
  • Drone control: if you drive the car to the track and home again, a kit sold on low drone is worth more than a few extra decibels.

One listing never covers every version of a car. Confirm year, model, engine and body style on Amazon before you buy any kit below.

Best Muffler for Performance Driving: Six Cat-Back Kits Up Close

Two kits fit the Mustang GT, two fit the Camaro SS and two fit the WRX. Every one bolts on behind the catalytic converters, and the sound notes come from the makers.

1. Borla 140745: T-304 Stainless Cat-Back for 2018-2023 Mustang GT Without Active Valves

Borla 140745 product photo
Key features
  • Listed for 2018-2023 Mustang GT 5.0L V8
  • For cars without active valve exhaust
  • T-304 stainless, all-welded construction
  • Bolt-on installation, made in USA

The Borla 140745 is a cat-back exhaust system listed for the 2018-2023 Ford Mustang GT with the 5.0L V8, with either the automatic or the manual transmission. It is made for cars that left the factory without the active valve exhaust, and the listing says it is not recommended for the convertible. That makes it a good match for base GT coupes, which outnumber the valved cars on many streets.

The whole system is T-304 stainless steel with all-welded construction, and Borla builds it in the USA. Borla lists the tone simply as its classic Borla sound. On a Coyote V8, that usually means a fuller idle and a clear rise in volume as the revs climb, which suits drivers who use the upper half of the tach on back roads or at an autocross.

Installation is bolt-on, using the factory connection points, so no cutting or welding is needed on a matching car. It is the wrong kit for a GT with the active valve exhaust, for the convertible, and for EcoBoost Mustangs, which use different parts. Check the sticker or window label on your car before ordering if you are unsure which exhaust it has.

View Borla 140745 on Amazon

2. Corsa 21042BLK Sport: 3.0 Inch Cat-Back with 4.0 Inch Twin Tips for 2018-2023 Mustang GT

Corsa 21042BLK Sport product photo
Key features
  • Listed for 2018-2023 Mustang GT coupe
  • 3.0 in cat-back tubing
  • 4.0 in twin tips
  • Sport sound level, high-flow design

The Corsa 21042BLK is a Sport-level cat-back exhaust listed for the 2018-2023 Mustang GT coupe. It uses 3.0 inch tubing from the converters back and finishes in 4.0 inch twin tips on each side. Corsa sells its kits in sound levels, and Sport is the step below its louder Xtreme option, so this is the choice for an owner who wants a stronger voice without going all the way.

Corsa calls the design high-flow. The brand’s Reflective Sound Cancellation technology is meant to cancel the low frequencies that cause drone at cruise while leaving the sound under acceleration intact. For a car that is driven to a track day, run hard, and then driven home on the interstate, that balance is often worth more than raw volume.

The listing gives only a short summary, so confirm with the seller whether your car’s exhaust setup, with or without factory valves, matches this part number before you order. It does not cover the convertible, the 2024 and newer Mustang, or the EcoBoost car. Like the other kits here, it attaches behind the catalytic converters, so the emissions parts stay where the factory put them.

View Corsa 21042BLK Sport on Amazon

serene autumn scene featuring a winding forest road with vibrant fall foliage

3. Corsa 14968: Cat-Back with X-Pipe and No-Drone RSC for 2010-2015 Camaro SS 6.2L

Corsa 14968 product photo
Key features
  • Listed for 2010-2015 Camaro SS 6.2L coupe and convertible
  • Includes X-pipe
  • RSC technology, no drone at cruise
  • 304 stainless steel construction

The Corsa 14968 is a cat-back exhaust with an X-pipe, listed for the 2010-2015 Chevrolet Camaro SS with the 6.2L V8 in coupe or convertible form. The listing notes that manual-transmission cars with the 1LE performance package take a different part, 14971, so check your build sheet or glovebox label first. It suits a fifth-generation SS that does duty on the street and at the occasional open track day.

Corsa builds the system from 304 stainless steel and uses its patented Reflective Sound Cancellation design, which the listing says means no drone at cruise. The X-pipe joins the two banks of the V8 ahead of the mufflers. That crossover tends to smooth the exhaust note and give the LS3 or L99 a cleaner, raspier sound at high rpm than a pair of separate pipes.

This kit replaces the factory system from the converters back, so it does not touch emissions hardware. It is not for the 2016 and newer Camaro, the V6 car or the ZL1. Drivers who want the loudest possible exhaust may find it restrained, but anyone who road-trips in the car will appreciate a quiet cabin at 70 mph.

View Corsa 14968 on Amazon

4. AWE Touring Edition 3020-43076: Non-Resonated Cat-Back for 2016-2019 Camaro SS

AWE Touring 3020-43076 product photo
Key features
  • Listed for 2016-2019 Camaro SS
  • Touring Edition, non-resonated layout
  • Quad Diamond Black tips
  • Sixth-generation Camaro cat-back

The AWE Touring Edition 3020-43076 is a cat-back exhaust listed for the 2016-2019 Chevrolet Camaro SS, the sixth-generation car with the LT1 V8. The title calls it a non-resonated system, and it ends in four Diamond Black tips. AWE sells two levels for many cars, Touring and Track, and Touring is the one meant for owners who still drive the car on ordinary days.

Many 2016 and newer SS models came with the factory dual-mode exhaust, and kits for those cars are often sold separately from kits for cars without it. The listing for this part is brief, so check with the seller that it matches your car’s exhaust setup before ordering. AWE also sells a Track Edition for the same car, so make sure the edition matches the sound you want.

For a Camaro that splits its time between commuting and spirited weekend drives, a Touring-level system is a reasonable middle ground. It is not a match for fifth-generation Camaros, the V6 or turbo four-cylinder cars, or the ZL1. As with every kit here, it bolts on behind the converters and leaves the emissions equipment in place.

View AWE Touring 3020-43076 on Amazon

serene autumn forest with fallen leaves and a winding path

5. Borla 140595 S-Type: T-304 Dual Split Rear Cat-Back for 2015-2021 WRX and WRX STI

Borla 140595 S-Type product photo
Key features
  • Listed for 2015-2021 WRX 2.0L and WRX STI 2.5L
  • S-Type sound, no drone guarantee
  • T-304 stainless, all-welded
  • Dual 3.5 in round polished tips each side

The Borla 140595 is an S-Type cat-back exhaust listed for the 2015-2021 Subaru WRX with the 2.0L turbo and the WRX STI with the 2.5L turbo. It exits at the rear on both sides, with dual 3.5 inch round polished T-304 stainless tips each side, so it keeps the four-tip look Subaru buyers expect. Borla describes it as a bolt-on install.

The system is T-304 stainless with all-welded construction and is made in the USA. Borla backs this kit with a no drone guarantee, which matters on a WRX because the flat-four’s exhaust rumble can turn into a cabin boom at highway speed with some aftermarket systems. The S-Type label is Borla’s middle sound level, louder than stock but well short of a race exhaust.

Because the turbo sits ahead of the cat-back, the sound reaching these mufflers is already softened, which helps keep the overall volume reasonable. This kit is a good fit for a WRX that is driven daily and taken to autocross or rally-cross events on weekends. It does not fit the 2022 and newer WRX or the older hatchback models, so confirm year and body before you buy.

View Borla 140595 S-Type on Amazon

6. AWE Track Edition: Cat-Back Exhaust for 2011-2018 WRX and STI Sedan

AWE Track Edition WRX product photo
Key features
  • Listed for 2011-2018 WRX and STI sedan
  • Fits VA and GV chassis cars
  • Track Edition sound level
  • Cat-back, bolts on behind the converters

The AWE Track Edition cat-back is listed for the 2011-2018 Subaru WRX and WRX STI sedan, and the listing names the VA and GV chassis codes. That covers the late third-generation sedan and the first several years of the VA car. The listing names the sedan only, so hatchback owners should look elsewhere and check body style first.

AWE builds its exhaust systems in two main sound levels, and Track Edition is the louder of the two. That makes it the choice here for an owner whose WRX is mostly a weekend car, a track-day car or an autocross car rather than a long-distance commuter. If you spend hours on the highway, the Touring version or the Borla S-Type above is the calmer option.

The listing for this part is short, so look up the full product details and tip finish with AWE or the seller before you order. Like the other picks, it replaces the system behind the catalytic converter only, so it does not require removing emissions parts. On a car that sees Michigan winters, rinse the underside after salty drives to keep the clamps and hangers in good shape.

View AWE Track Edition WRX on Amazon

Side-by-Side: Fitment and Tone

Find your car in the first column, then compare the tone each maker lists. If two kits fit, let your daily mileage decide.

KitListed fitmentKey detailSound, as listed
Borla 1407452018-2023 Mustang GT 5.0L, no active valveT-304 stainless, not for convertibleClassic Borla sound
Corsa 21042BLK2018-2023 Mustang GT coupe3.0 in pipe, 4.0 in twin tipsSport
Corsa 149682010-2015 Camaro SS 6.2LX-pipe, 304 stainlessNo drone at cruise
AWE 3020-430762016-2019 Camaro SSNon-resonated, quad tipsTouring Edition
Borla 1405952015-2021 WRX and WRX STIT-304, dual split rearS-Type, no drone guarantee
AWE Track Edition2011-2018 WRX and STI sedanVA and GV chassisTrack Edition
Performance cat-back picks by listed fitment, construction and maker sound label

A weekend-only car can take the louder Track or Sport options. If the same car handles your commute, the best muffler for performance driving is usually the one with a quieter label and a drone claim, because you will hear it every day.

picturesque road winds through a vibrant autumn forest

Michigan Exhaust Rules and Road Salt

Michigan Compiled Laws section 257.707 says a motor vehicle must always have a muffler in good working order and in constant operation to prevent excessive or unusual noise. The same section says no one may remove, destroy or damage the baffles inside a muffler. It also requires a working exhaust system with a tailpipe and resonator on any vehicle originally designed with them.

Each kit here keeps a muffler in the system and leaves the converters alone. We don’t recommend straight pipes, muffler deletes or removing any emissions part on a car you drive on public roads.

winding road through snowy landscape

Then there is the weather. West Michigan brine coats the underside of a car from November into spring, and a performance car that sits between drives collects moisture inside the muffler. T-304 stainless resists that best. Many owners also store the car for winter, which is kinder to any exhaust than daily slush.

On an older car, factory bolts at the flanges can be rusted solid. Our roundup of the best rust remover for exhaust hardware covers penetrating oils that help.

Fitting the Kit and Knowing When to Call a Mechanic

snow-covered road in Norway with mountains and a lake under cloudy skies

Most cat-backs reuse the factory hangers and bolt to the existing flange, so a careful home install is possible on jack stands. The hard parts are aligning the tips evenly in the bumper cutouts and keeping every pipe clear of the subframe, fuel tank straps and driveshaft.

After the first hard drive, listen for ticking at the joints and watch for soot around the clamps. Our article on exhaust leak symptoms lists the warning signs. A patch from our exhaust repair kit guide can seal a small hole in an old pipe, but a leaking joint on a new kit needs proper clamping.

We handle exhaust repair in Grand Rapids for foreign and domestic vehicles, from hangers and clamps to full muffler swaps. Bring the car and the kit, and we can install it for you.

Frequently Asked Questions

Does a cat-back exhaust add horsepower?

A little, in most cases. A cat-back lowers back pressure behind the converters, but the headers, intake and tune do more for power. The main change you will notice is sound and how eagerly the engine revs.

What is the best muffler for performance driving on a daily driver?

Look for a kit that fits your exact car and carries a low-drone claim from its maker, such as the Corsa 14968 for a 2010-2015 Camaro SS or the Borla 140595 for a 2015-2021 WRX. Those keep highway cruising calm while still opening up under throttle.

Do I need a tune after installing a cat-back?

Not for the kits in this guide. They bolt on behind the catalytic converters and don’t change the sensors the engine computer reads. A tune only comes into play with headers or other changes further up the exhaust.

Can I run a straight pipe on a performance car in Michigan?

Not on public roads. MCL 257.707 requires a muffler in good working order and in constant operation, so a cat-back that keeps a real muffler is the street-friendly way to add sound.

Got your cat-back picked and want a lift and a set of hands on it? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up an exhaust visit on our contact page.

If daytime drop-off is tough, the after-hours drop-off at 456 Carrier St NE in Grand Rapids lets you leave the car and the boxed kit with us overnight.