As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Tacoma on its third set of tires, a Tundra that tows a boat every summer and a Camry that still does the daily commute all wear Toyota badges, yet none of them share an exhaust. That is why the best muffler for Toyota owners is always a listing that names the model, the years and the engine under your hood.
Below are six options, from a quiet stainless repair muffler to bolt-on truck and SUV kits. For chambered, turbo and straight-through designs in general, see our aftermarket muffler buyer’s guide.
Quick answer
What muffler should my Toyota get?
Pick by model and engine. A 2014-2021 Tundra 5.7L suits MagnaFlow’s 15305 cat-back, a 2016-2023 Tacoma 3.5L V6 takes Flowmaster’s FlowFX 717944, and a 2007-2011 Camry with a rusted rear box gets Walker’s Quiet-Flow SS 53685 for a factory-style repair. The older Tacoma, 4Runner and Corolla have their own kits below.
Our Quick Picks
Three quick picks for the most common Toyota setups: a Tundra 5.7L, a third-generation Tacoma V6 and a Camry that only needs a quiet repair. All six options are reviewed below.

MagnaFlow 15305 Street Series
A full Street Series system that exits behind both rear corners.

Flowmaster FlowFX 717944
A straight-through FlowFX kit with a deep, moderate tone.

Walker Quiet-Flow SS 53685
A stainless replacement that keeps the stock Camry sound.
Decode Your Toyota Before You Order
Toyota exhaust parts are cut for one chassis at a time, and on trucks the frame length also changes with the cab and bed. Check these details before you order:
- Generation and years: the 2005-2015 Tacoma and the 2016-2023 Tacoma use different frames, pipes and hanger spots, and the 2024 truck changed again.
- Engine: a 4.0L V6, 3.5L V6, 4.6L V8 or 5.7L V8 each set the pipe size and where the system starts.
- Cab, bed and wheelbase: Access Cab, Double Cab and CrewMax trucks pair with different bed lengths, and kits often list a wheelbase in inches.
- Exit position: a single side exit ahead of the rear tire, a rear exit under the bumper and a dual split layout need different tailpipes.
Your Toyota owner’s manual and warranty booklet list the exact engine and model code, and the warranty section is worth reading before you change anything behind the catalytic converter.
Factory-Style Repair or Bolt-On Cat-Back?
If your Camry or Corolla simply has a rear muffler that rotted at the seams, a direct-fit replacement is the plain fix. It bolts to the existing flange, uses factory-style hangers and keeps the stock sound.
A cat-back system swaps every pipe, muffler and tip behind the converter. On a truck with crusty original pipes, that can be less work than patching three joints. The trade-off is sound: some kits hum at a steady highway cruise, which matters on a long drive with a trailer, so read how each maker describes its tone.
Best Muffler for Toyota: Six Picks by Model
Each listing below names the Toyota it was built for. Confirm year, model, engine, cab and bed length on Amazon before you buy, because no single kit covers every Tacoma, Tundra or Camry.
1. MagnaFlow 15305 Street Series: Dual Split Cat-Back for 2014-2021 Toyota Tundra 5.7L

- Listed for 2014-2021 Tundra 5.7L and 2014-2019 Tundra 4.6L
- Dual split rear exit layout
- Vehicle-specific bolt-on cat-back
- Made in the United States
The MagnaFlow 15305 is a Street Series cat-back system listed for the 2014-2021 Toyota Tundra with the 5.7L V8 and the 2014-2019 Tundra with the 4.6L V8. It replaces the pipes, muffler and tailpipes behind the catalytic converters and finishes in a dual split rear exit, with one tip at each rear corner of the bumper. Decide whether you like the split look before ordering.
MagnaFlow lists the kit as vehicle-specific, which means the pipe bends and hangers are meant to line up with the Tundra frame instead of needing fabrication. The listing gives the country of origin as the United States and a package weight of about 70 pounds, so plan on a second pair of hands when you lift the long sections into place.
This kit suits a Tundra owner whose original exhaust is rusting at the joints or who wants a fuller V8 sound from a bolt-on part. It is not the right fit for a 2022 or newer Tundra, which uses a different twin-turbo V6 and frame. Check cab, bed length and engine on Amazon, because the listing is cut for select Tundra configurations only.
View MagnaFlow 15305 Street Series on Amazon
2. Flowmaster FlowFX 717944: 2.5 in Stainless Cat-Back for 2016-2023 Toyota Tacoma 3.5L V6

- Listed for 2016-2023 Tacoma 3.5L V6
- 2.5 in 16-gauge 409 stainless tubing
- 3.5 in black ceramic coated tip
- Factory-style hangers in stock locations
Flowmaster’s FlowFX 717944 is a cat-back exhaust kit listed for the 2016-2023 Toyota Tacoma with the 3.5L V6. It replaces the factory system from the converter back with 2.5 inch mandrel-bent tubing made from 16-gauge 409 stainless steel, and it ends in a large 3.5 inch tip with a black ceramic coating. Flowmaster includes the clamps, hardware and factory-style hangers that mount in the stock locations.
At the center of the kit is a FlowFX straight-through muffler, which Flowmaster says gives a deep, moderate performance tone while improving flow. The maker also claims gains of up to 9 horsepower and 10 lb-ft of torque over the stock exhaust, figures that come from Flowmaster rather than independent testing. A lifetime limited warranty from Flowmaster backs the kit, which helps on a truck that sees salted Michigan roads every winter.
This system suits a third-generation Tacoma V6 owner who wants more sound than stock without moving to a loud, open-chamber muffler. It is not meant for the 2.7L four-cylinder truck or for the 2024 and newer Tacoma, which uses a different powertrain. Confirm cab style and bed length on Amazon, since Tacoma frame length varies with both.
View Flowmaster FlowFX 717944 on Amazon

3. Borla 140160: T-304 Stainless Cat-Back for 2005-2012 Toyota Tacoma 4.0L V6

- Listed for 2005-2012 Tacoma 4.0L V6, 2WD and 4WD
- Access Cab long bed or Double Cab short bed, 127.4 in wheelbase
- T-304 stainless, all-welded construction
- Bolt-on installation, made in USA
The Borla 140160 is a cat-back performance exhaust listed for the 2005-2012 Toyota Tacoma with the 4.0L V6, in both two-wheel and four-wheel drive and with automatic or manual transmissions. The listing is specific about the body: it covers the Access Cab with the long bed of about 6 feet 2 inches and the Double Cab with the 5 foot short bed, both on a 127.4 inch wheelbase.
Borla builds the system from T-304 stainless steel with all-welded construction, and the listing says it is made in the USA. It is a bolt-on installation, so the pipes connect at the factory joints and hangers instead of needing cutting or welding on a sound truck. Borla describes the result only as its classic Borla sound, so expect a sportier note than stock and look up a sound clip if tone matters to you.
This kit suits an owner of a second-generation Tacoma V6 whose factory muffler or tailpipe has rusted out after years of salt. It does not fit the 2.7L four-cylinder, the Regular Cab or the 2013-2015 trucks unless the listing says so. Check year, cab, bed and wheelbase on Amazon before you buy.
View Borla 140160 Cat-Back on Amazon
4. MagnaFlow 19546 Overland Series: High-Clearance Cat-Back for Toyota 4Runner 4.0L

- Listed for 4Runner 4.0L (2003-2024 on the listing)
- Single passenger side rear exit
- High-clearance routing for departure angle
- No Drone Technology, per MagnaFlow
MagnaFlow’s 19546 is an Overland Series cat-back system listed for the Toyota 4Runner with the 4.0L V6, with the listing naming 2003-2024 model years. It exits on the passenger side ahead of the rear bumper, and MagnaFlow designed the routing to sit higher than a street kit so it gains ground clearance and improves the departure angle. That matters on a 4Runner that climbs rutted two-tracks or drops off ledges.
MagnaFlow says the system is tuned with its No Drone Technology, meant to keep cabin noise comfortable on long highway stretches while still giving the engine more character. The company calls the tone camp-friendly, which suggests it is not aimed at being loud at idle. Construction is covered by MagnaFlow’s limited lifetime warranty, and the maker says it plants a tree with the National Forest Foundation for each Overland Series product sold.
This kit suits a 4Runner used for road trips, camping and light trail work, where clearance counts as much as sound. Someone who wants a dual rear exit or a louder street tone should look elsewhere. Because the listing spans more than one 4Runner generation, confirm your year, drivetrain and engine on Amazon before ordering.
View MagnaFlow 19546 Overland Series on Amazon

5. Walker Quiet-Flow SS 53685: Direct-Fit Muffler Assembly for 2007-2011 Toyota Camry

- Listed for 2007-2011 Toyota Camry
- 2 in inlet (OD), 2 in outlet (OD)
- 100% stainless steel with internal drainage
- OE-style hangers, factory-style sound
The Walker Quiet-Flow SS 53685 is a direct-fit muffler assembly listed for the 2007-2011 Toyota Camry, with a 2 inch outside diameter inlet and a 2 inch outside diameter outlet. It is a repair part, not a performance kit, and it restores the factory fit and sound. Walker asks buyers to enter year, model, engine and trim and read the qualifier notes, and that step matters here because Camry engines differ in this range.
Walker says the Quiet-Flow SS line is built entirely from stainless steel, and this muffler has an internal drainage system to reduce the moisture that rots cases from the inside. OE-style louvered tubes and domed heads are used to lower noise and give a factory-style sound. The assembly comes with OE-style hangers, brackets and pipe routing so it bolts in without welding or fabrication.
This muffler suits a Camry driver whose rear box has a hole, a rattle or a rotted seam and who simply wants the car quiet again. It will not add sound or power, and it is not meant for other model years. Walker backs it with a limited lifetime warranty and its 90-day Safe and Sound Guarantee.
View Walker Quiet-Flow SS 53685 on Amazon
6. Borla 140845: T-304 Stainless Cat-Back for 2020-2023 Toyota Corolla SE/XSE 2.0L

- Listed for 2020-2023 Corolla SE and XSE 2.0L sedan
- Front-wheel drive, automatic or manual
- T-304 stainless, all-welded construction
- Bolt-on installation, made in USA
The Borla 140845 is a cat-back performance exhaust listed for the 2020-2023 Toyota Corolla SE and XSE sedans with the 2.0L four-cylinder engine. It covers front-wheel-drive cars with either the automatic or the manual transmission. The listing names the four-door sedan only, so the Corolla hatchback, the hybrid and the 1.8L L and LE trims are not covered by this part number.
Like the Tacoma kit above, this system uses T-304 stainless steel with all-welded construction, and Borla says it is made in the USA. Installation is bolt-on, using the factory connection point behind the converter and the stock hanger locations. Borla describes the sound simply as its classic Borla sound, so the car will be noticeably sportier than stock at full throttle, and a sound clip from the maker is the best way to judge it before you buy.
This kit suits an SE or XSE owner who wants a little more character from the 2.0L engine and a stainless system that should stand up to road salt. It is a poor match for a driver who values a near-silent cabin or who owns a different Corolla trim. Check year, trim, body style and transmission on Amazon before you order.
View Borla 140845 Cat-Back on Amazon
Toyota Fitment at a Glance
Start with this table to find your vehicle, then check the listing itself for trim, cab and bed notes.
| Toyota | Option here | Type | Sound or tone (maker’s words) |
|---|---|---|---|
| 2014-2021 Tundra 5.7L (2014-2019 4.6L) | MagnaFlow 15305 | Cat-back, dual split rear exit | Street Series |
| 2016-2023 Tacoma 3.5L V6 | Flowmaster 717944 | Cat-back, 2.5 in stainless | Deep, moderate |
| 2005-2012 Tacoma 4.0L V6 | Borla 140160 | Cat-back, T-304 stainless | Classic Borla sound |
| 4Runner 4.0L (listed 2003-2024) | MagnaFlow 19546 | Cat-back, high clearance | No Drone Technology |
| 2007-2011 Camry | Walker Quiet-Flow SS 53685 | Direct-fit muffler assembly | Factory-style |
| 2020-2023 Corolla SE/XSE 2.0L sedan | Borla 140845 | Cat-back, T-304 stainless | Classic Borla sound |

A family Camry is well served by the quiet Walker part, while a Tacoma that goes camping on weekends can take a louder stainless kit. For many drivers, the best muffler for Toyota trucks is simply the one that still sounds pleasant after two hours on I-96 with a loaded bed.
Road Salt, Drone and Michigan’s Muffler Rule
Section 257.707c of the Michigan Vehicle Code says a motor vehicle must have a muffler in good working order and in constant operation to prevent excessive or unusual noise. The same section bars muffler cutouts, bypasses and similar devices on a street or highway. Every part in this guide keeps a working muffler in place, and we do not recommend straight pipes, resonator deletes or removing emissions parts.
Salt is what usually ends a Toyota exhaust in West Michigan. Slush coats the pipes all winter, and short trips leave condensation inside the muffler case. Stainless kits resist that far better than aluminized pipe, though clamps, bolts and rubber hangers still wear out.

Before you replace a whole system, look at what actually failed. A single pinhole can be sealed for a while with a patch from our exhaust repair kit picks, and our page on a hole in the muffler explains when that stops being safe. A rattle under the bed is often a snapped exhaust hanger rather than the muffler itself.
Jobs to Hand to a Shop
A direct-fit Camry muffler or a fresh cat-back on a clean truck is a reasonable home job with sturdy jack stands. A Tacoma or Tundra that has lived through a decade of salt is different. Flange bolts at the converter tend to snap, and the old pipes may need cutting before they come out.
If you smell exhaust in the cab, the leak is likely ahead of the muffler, and our guide to exhaust leak symptoms shows what to look for. Keep the windows cracked and get it checked soon.

When seized hardware is the problem, our exhaust repair service in Grand Rapids can install the best muffler for Toyota trucks and cars along with new clamps, hangers and pipe sections.
More Buying Guides
Frequently Asked Questions
Will a Tacoma exhaust fit every cab and bed length?
No. Tacoma kits are often listed for a specific cab, bed length and wheelbase, because the frame and tailpipe length change with them. Match all three on the listing before you order.
Which muffler suits a Tundra 5.7 that tows?
A full cat-back made for your Tundra years keeps the pipe sizing correct and uses the factory hanger points. If long towing trips are common, favor a kit whose maker describes a moderate tone so cabin noise stays reasonable.
Is a louder Toyota exhaust legal in Michigan?
A bolt-on system that keeps a working muffler is the normal route. Michigan’s vehicle code requires a muffler in good working order and bans cutouts and bypasses, so straight pipes are not street legal here.
Do I need a cat-back to fix a rusted Camry muffler?
Usually not. A direct-fit muffler assembly for your Camry years replaces the rotted section and keeps the factory sound. A full cat-back only makes sense if the pipes ahead of it are also rusting through.
Is your Toyota louder than it should be, or dragging a loose tailpipe? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up an exhaust visit on our contact page, and we can fit the best muffler for Toyota models that suits how you drive.
Busy during shop hours? Our after-hours drop-off lets you leave the keys and the truck whenever it suits you. Look for 456 AutoFix at 456 Carrier St NE, Grand Rapids, MI 49505.
