456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Stock or Leveled? The Best Struts for Silverado 1500 Trucks

best struts for silverado: trailer jack on grass

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Silverado front end wears out quietly: the truck still steers, but it wallows after dips and dives under braking. The best struts for Silverado pickups are the ones listed for your exact generation and ride height, built for the work the truck actually does.

Below are the best struts for Silverado 1500 trucks from 2007 on, split by generation, plus a note on the 2500HD. For shocks and struts on cars and crossovers, see our roundup of shocks and struts for daily drivers.

Quick answer

Which front struts should a Silverado 1500 get?

Match the strut to your generation first, then pick a ride. For stock height, a Bilstein 4600 or a loaded Monroe Quick-Strut restores factory height, while the Bilstein 5100 levels the front up to 2.5 inches. Loaded struts skip the spring compressor. A 2500HD has torsion bars and front shocks, not struts.

Our Quick Picks

Three quick picks: a stock-height Bilstein pair for 2019 and later trucks, a leveling Bilstein 5100 pair and a loaded Monroe Quick-Strut for 2014 to 2018. All six listings are reviewed below.

Bilstein B6 4600 Front Pair product photo
Stock height, 2019+

Bilstein B6 4600 Front Pair

Front pair · 2019-2025 Silverado 1500

A bare monotube pair for trucks that keep the factory stance.

SuitsOwners who want firmer control without a lift
View on Amazon →
Bilstein B8 5100 Front Pair product photo
Leveling pick

Bilstein B8 5100 Front Pair

Front pair · 0-2.5" lift · 2019-2025

Bilstein's 5100 for owners who want to raise the front and cut the rake.

SuitsMild leveling on 2019 and later trucks
View on Amazon →
Monroe Quick-Strut 239112 product photo
Loaded, 2014-2018

Monroe Quick-Strut 239112

Complete corner · 2014-2018 Silverado 1500

An OE-style loaded strut that restores ride height on a K2XX truck.

SuitsHigh-mileage trucks that sag up front
View on Amazon →

Which Silverado Do You Have? Struts by Generation

Every Silverado 1500 since the 2007 redesign uses a coilover strut at each front corner, with leaf springs and ordinary shocks at the rear. So strut shopping on a half-ton is a front job, and the generation decides which part fits.

  • 2007 to 2013 (GMT900): the first coilover generation. Early 2007 “Classic” trucks are the older body and take different parts.
  • 2014 to 2018 (K2XX): new mounts and springs. The 2019 “LD” trucks carry this design over.
  • 2019 and later (T1XX): a new front end with more trim-specific suspension.

The newest trucks carry the most exceptions. Chevrolet’s Silverado 1500 page lists a 2-inch factory lift with monotube shocks on the Trail Boss, Multimatic DSSV dampers on the ZR2 and semi-active damping on the High Country. Most listings below exclude those versions.

The 2500HD is different. Its front end uses torsion bars and a plain shock at each corner, so there is no front strut to buy; shop for front shocks listed for your year and drive type instead.

Loaded Quick-Strut or Bare Coilover Strut?

  • Loaded (complete) strut: damper, new coil spring and upper mount arrive assembled. It bolts in and renews the tired spring at the same time.
  • Bare strut: only the damper. You compress the factory spring, take the assembly apart and rebuild it on the new strut.

A GM front spring holds a lot of stored energy, so read our guide to the coil spring compressor types that suit strut work before a bare-strut job. Either way, replace both fronts together so the truck sits level.

Best Struts for Silverado: Six Front Listings by Generation

These six are the best struts for Silverado owners across three generations, each with the years its listing states. No listing covers every truck, so confirm year, cab, drive type and trim in Amazon’s fit checker.

1. Bilstein B6 4600: Front Monotube Strut Pair for 2019-2025 Silverado 1500 at Stock Height

Bilstein B6 4600 Front Pair product photo
Key features
  • Listed for 2019-2025 Silverado/Sierra 1500
  • Front pair for 0 inch front lift
  • Digressive, velocity-sensitive valving
  • Excludes Trail Boss and Active Ride Control

The Bilstein B6 4600 is the brand’s replacement-height line for trucks, and this listing is a front pair for the 2019 to 2025 Silverado 1500 and Sierra 1500. It is meant for trucks at stock front height, with no lift or leveling, and the listing excludes Trail Boss models and trucks with Active Ride Control suspension. Those exclusions matter on the newer generation, so check your trim and suspension code before ordering.

Bilstein describes the valving as digressive and velocity sensitive, meaning it reacts to how fast the suspension moves rather than holding one fixed rate. The aim, in the maker’s words, is a smooth but controlled ride on pavement and rough roads, tuned separately for each vehicle. Vulcanized neoprene bushings are fitted, and Bilstein backs the line with a limited lifetime warranty. For a half-ton that tows or hauls, that mix of comfort and body control is the usual reason owners choose it.

This is a bare strut, not a loaded assembly. You reuse the factory coil spring and upper mount, which means compressing the spring with a proper strut compressor or paying a shop to do the transfer. It suits an owner who likes the truck’s stance and wants better damping, not one who wants to level the front.

View Bilstein B6 4600 Front Pair on Amazon

2. Bilstein B8 5100: Front Strut Pair with 0-2.5″ Lift for 2019-2025 Silverado 1500

Bilstein B8 5100 Front Pair product photo
Key features
  • Listed for 2019-2025 Silverado/Sierra 1500
  • Front pair for 0 to 2.5 inches of front lift
  • Zinc-plated body against rust
  • Excludes Trail Boss and Active Ride Control

The Bilstein B8 5100 is the line most Silverado owners mean when they talk about leveling the front without spacers. This listing is a front pair for the 2019 to 2025 Silverado 1500 and Sierra 1500 without Active Ride Control, and it quotes 0 to 2.5 inches of front lift. Trail Boss models are excluded, because they already leave the factory with a 2-inch lift and their own monotube shocks. Bilstein also sells 5100 listings for 2007 to 2013 and 2014 to 2018 trucks, so make sure the one you open names your years.

Like the 4600, the 5100 uses digressive, velocity-sensitive valving that Bilstein tunes for each vehicle and says gives a controlled ride on and off pavement. The body is zinc plated to resist rust and road salt, which is welcome on a truck that sees Michigan winters. It carries a limited lifetime warranty.

Raising the front changes the ride and the alignment. Expect a firmer feel than stock, and book an alignment once the truck sits at its new height. As a bare strut it reuses your factory spring and top mount, so a strut compressor or a shop is part of the plan. It suits owners who want a level look and bigger tires, not a factory feel.

View Bilstein B8 5100 Front Pair on Amazon

gravel road between cornfields

3. Rough Country N3: Loaded Front Struts, Set of 2, for 2019-2026 Silverado 1500 at Stock Height

Rough Country N3 Loaded Struts product photo
Key features
  • Listed for 2019-2026 Silverado/Sierra 1500
  • Pre-loaded with coil springs, set of 2
  • 1 3/8 inch bore, nitrogen gas charged
  • Stock-height trucks only

Rough Country is better known for lift kits, but its N3 line includes this loaded strut pair made as an OE replacement for stock-height trucks. The listing names the 2019 to 2026 Silverado 1500 and Sierra 1500, and it comes as a set of two front assemblies with the coil springs already installed. Because the spring stays captured, there is no need for a spring compressor, which makes it one of the easier ways to renew both front corners of a newer truck at home.

Rough Country describes velocity-sensitive valving with infinitely variable damping, meant to give a factory-like ride with better control. The damper uses an oversized 1 3/8 inch bore, a nitrogen gas charge, low-friction shock oil, a hardened chromed piston rod and a seal the maker calls leak proof. Those are the details that decide how long a strut lasts on a truck that sees potholes and salt.

The fitment note is strict: these are for stock-height trucks only and are not designed to be used with leveling or lift spacers. Rough Country sells separate N3 loaded struts for leveled and lifted trucks, so pick the version that matches your stance. Trim exclusions can still apply on the newer generation, so confirm your exact truck in Amazon’s fit checker before you buy.

View Rough Country N3 Loaded Struts on Amazon

4. Monroe Quick-Strut 239112: Front Strut and Coil Spring Assembly for 2014-2018 Silverado 1500

Monroe Quick-Strut 239112 product photo
Key features
  • Listed for 2014-2018 Silverado 1500 and 2019 1500 LD
  • Strut, spring and upper mount pre-assembled
  • No spring compressor needed
  • Protective coating, salt spray tested

The Monroe Quick-Strut 239112 is a complete front corner for the 2014 to 2018 Silverado 1500 and Sierra 1500, and the listing also names the 2019 Silverado 1500 LD and Sierra 1500 Limited, which carried the older design into that year. The strut, an application-specific coil spring and a premium upper mount arrive assembled, so the whole corner is renewed in one part. It is sold one per box, so order two for the front axle.

Monroe says the spring is calibrated to the OE design to restore ride height and support the truck’s weight, which is useful when an older half-ton has started to sit low in front. The upper mount is meant to bring back smooth steering and cut noise and memory steer, a common complaint when a factory mount wears. A protective coating and salt spray testing are part of the spec, and the tube and weld design are aimed at long service on a working truck.

Because it comes assembled, the job needs no spring compressor and goes faster than rebuilding a bare strut. It restores a factory ride rather than changing it, so it does not suit an owner who wants to level the truck. Check the Amazon Confirmed Fit bar with year, engine and trim entered, and look for any qualifier notes.

View Monroe Quick-Strut 239112 on Amazon

snowy road through a pine forest

5. Rancho RS9000XL RS999830: Adjustable Front Strut Pair for 2014-2016 Silverado 1500

Rancho RS9000XL RS999830 product photo
Key features
  • Part number RS999830, front pair
  • Listed for 2014-2016 Silverado 1500 2WD and 4WD
  • Factory height, 0 inch front lift
  • Excludes HD models and ZX3 Ride Control

Rancho’s RS9000XL is its adjustable shock and strut line for trucks and SUVs that tow, haul or leave the pavement. This listing, part number RS999830, is a front strut pair for the 2014 to 2016 Silverado 1500 in 2WD and 4WD form, made for trucks at factory height with no front lift. It excludes heavy-duty models and trucks with ZX3 Ride Control, so a 2017 or 2018 truck, or one with the electronic package, needs a different listing.

The selling point is the adjuster. Rancho describes the RS9000XL as having a nine-position knob that lets you pick a softer or firmer damping setting, which suits a half-ton that runs empty during the week and pulls a trailer on weekends. Rancho’s line details also mention nitrogen gas pressure to limit oil foaming and fade, along with a limited lifetime warranty and a 90-day ride guarantee on RS9000XL shocks.

Washers, bushings and nuts come in the box, and the factory mounting bolts are reused. It is a bare strut, though, so the factory coil spring and top mount have to be moved over with a strut compressor, or by a shop. It suits an owner who wants control over ride firmness rather than a lift or a fully loaded assembly.

View Rancho RS9000XL RS999830 on Amazon

6. Unity Complete Strut Assembly: Front Strut with Coil Spring for 2007-2013 Silverado 1500

Unity Complete Strut Assembly product photo
Key features
  • Listed for 2007-2013 Silverado 1500 and Sierra 1500
  • Strut, coil spring and bearing plate pre-assembled
  • Bolt-on install with mounting hardware
  • OE-style damping and ride height

Unity builds complete strut assemblies for many vehicles, and this listing covers the front of the 2007 to 2013 Silverado 1500 and Sierra 1500, the first generation with coilover front struts. Each unit includes a pre-installed coil spring, the strut, a bearing plate and mounting hardware. The early 2007 Classic trucks use the previous front suspension, so this part is for the new-body trucks only, and you should still confirm cab, drive type and engine.

Unity says the assembly meets or exceeds original equipment standards and aims for factory-like damping, ride comfort and correct ride height. For a GMT900 truck that has passed the point where the original struts and springs have sagged, replacing the whole corner is often simpler than chasing a worn mount or a tired spring separately. The listing points to reduced suspension noise and better tire wear as the main gains.

There is nothing to compress or rebuild, so the job comes down to unbolting the old corner and fitting the new one, which suits a careful home mechanic. It is a restore-to-stock part with no lift or adjustment, so it is the wrong choice for leveling. Buy a pair for the front axle, and book an alignment once both corners are in.

View Unity Complete Strut Assembly on Amazon

Choosing by Generation and Ride Height

Narrow the list here, then check the exact part against your VIN.

Your truckListing to checkTypeKeep in mind
2019 and later, stock height, factory ride wantedBilstein B6 4600 front pairBare monotubeSpring transfer needed; not Trail Boss
2019 and later, mild front levelBilstein B8 5100 front pairBare, height adjustableFirmer than stock; alignment after
2019 and later, bolt-in swap at stock heightRough Country N3 loaded pairLoadedNot for leveled or lifted trucks
2014 to 2018, high-mileage work truckMonroe Quick-Strut 239112LoadedSold per corner; buy two
2014 to 2016, tows on weekendsRancho RS9000XL RS999830 pairBare, adjustable dampingNot for ZX3 Ride Control
2007 to 2013, budget refreshUnity complete assemblyLoadedNot for Classic trucks
Silverado 1500 front strut listings compared by generation, ride height and type
worker grinding metal with sparks

Before you blame the struts for every noise, rule out the cheaper parts. A chirp or creak over speed bumps often comes from dry bushings or sway bar links, which our guide on why a car squeaks when going over bumps walks through. A heavy knock is covered in our post on a clunking noise over bumps.

Road Salt, Potholes and Silverado Front Ends in West Michigan

Grand Rapids winters are hard on a pickup’s front end. Freeze-thaw potholes drive the strut to the end of its stroke, and a truck that plows or tows takes those hits with more weight behind them. Over time the seals weep and the front starts to float at highway speed.

Watch for a bounce after dips, a hard nose dive, cupped front tires or oil streaks on the strut body. Our guide on how to tell if struts are bad covers each sign, and our list of pothole damage signs helps after a hard hit.

rows of metal parts

Salt adds labor, since lower strut bolts seize and upper mount studs rust. Even the best struts for Silverado trucks go in slowly then, so soak the hardware with penetrating oil a day ahead and have new nuts on hand.

Fitting Silverado Struts: DIY Limits and Alignment

A loaded strut on a 1500 is a fair driveway job with jack stands and patience. A bare strut is where people get hurt, so without a compressor rated for truck springs, have the spring transfer done in a shop.

Plan an alignment either way. Monroe’s alignment tech tip explains that new struts can shift camber, toe and caster, which wears tires and pulls the truck off line.

driver at the wheel at dusk

If you would rather hand the truck off, our suspension repair service in Grand Rapids covers struts, shocks, mounts and the steering parts around them. Hendrick, our head mechanic, is ASE and State of Michigan certified in steering and suspension work, (more on our about us page).

Frequently Asked Questions

Bilstein 4600 or 5100 on a Silverado 1500?

The 4600 is listed for stock front height and is meant to restore a controlled, factory-style stance. The 5100 lets you raise the front to level the truck. Pick the 5100 if you want to remove some rake.

Does a Silverado 2500HD have front struts?

No. The 2500HD front end uses torsion bars with a separate shock at each corner. Buy front shocks listed for your year and drive type rather than struts.

Do I need a spring compressor for Silverado struts?

Only for bare struts, such as the Bilstein pairs, where you move the factory spring onto the new damper. Loaded struts arrive with the spring and mount assembled, so they bolt in without one.

Should I replace the rear shocks when I do the front struts?

If they are the same age, yes. Worn rear shocks leave the back bouncing on its leaf springs, most of all when you tow.

Silverado floating, diving or knocking on Grand Rapids streets? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a front-end inspection through our contact page.

Working the same hours we do? Park the truck at 456 Carrier St NE, Grand Rapids, after hours and drop the keys with our after-hours drop-off.