As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The Cherokee XJ earned its reputation with the 4.0L inline six, but that engine runs warm, and a tired radiator is often the first part to give up. Plastic tanks crack and cores clog with scale. Choosing the best radiator for Jeep XJ trucks comes down to three facts: the model year, the engine and whether the transmission is manual or automatic.
Below we sort those fit questions first, then review six radiators, from a factory-style swap to a three-row core and a complete fan kit.
Quick answer
Which radiator should you buy for a Cherokee XJ?
For a stock 1991-2000 XJ, a factory-style core such as the TYC 1193 is enough. A 4.0L that tows or crawls in summer heat benefits from the CSF 2671 three-row or, on a manual, the Mishimoto MMRAD-XJ-89. A 1984-1990 Cherokee needs its own pattern, such as the Auto Dynasty 78.
Our Quick Picks
Three quick picks: a factory-style TYC core for stock 1991-2000 Cherokees, a heavy duty CSF three-row for working 4.0L Jeeps and a Mishimoto aluminum radiator for manual XJs. All six are reviewed below; confirm year, engine and transmission on Amazon before ordering.

TYC 1193 Radiator
A factory-pattern core for an XJ that just needs a fresh radiator.

CSF 2671 Heavy Duty Radiator
Extra core for a Cherokee that tows, hauls or crawls in heat.

Mishimoto MMRAD-XJ-89
A performance aluminum radiator for modified manual Cherokees.
Year, Engine and Transmission: Three Fit Checks First
Jeep built the XJ from 1984 to 2001, and the radiator changed along the way, so the best radiator for Jeep XJ owners starts with the right pattern.
- 1984 to 1990: early Cherokees, Comanches and Wagoneers use the CU78 pattern, a single-row core that the listing in this guide sells with a transmission cooler.
- 1991 to 2001: the later XJ and the 1991-1992 Comanche use the CU1193 pattern, sold in both four-cylinder and inline six versions.
- The 2001 model year: some listings stop at 2000, and Mishimoto mentions provisions for both open and closed cooling systems, so a 2001 owner should check the cap and reservoir setup against the listing.
The transmission matters too. Automatic XJs route fluid through a cooler inside the radiator tank, so a radiator without one leaves you needing a separate cooler.
Stock Replacement or an Aluminum Upgrade?
A factory-style radiator uses an aluminum core with plastic tanks, just like the original. It is the simple fix for a stock Jeep whose old core is clogged or whose tank has split.
An all-metal two-row or three-row radiator adds coolant capacity and tube surface, and welded metal tanks avoid the cracked plastic seam that ends many stock units. That margin earns its place on a Jeep that tows, runs oversized tires or crawls slowly in August heat.
Whichever way you go, refill with the coolant type your owner’s manual calls for. Our guide to coolant choices for Jeep engines covers the formulas by era.
Best Radiator for Jeep XJ: Six Radiators by Era and Use
Each radiator below is a single Amazon listing that names the Cherokee XJ in its fitment. Coverage differs by year, engine and transmission, so confirm year, model and engine on Amazon before buying, and never assume one radiator fits every XJ.
1. TYC 1193 Radiator: OE-Style Replacement for 1991-2000 Jeep Cherokee

- Direct OE replacement, drop-in fit
- Aluminum tubes with louvered fins
- Aluminum inlet rings and internal tank ribs
- Double header plates against leaks
The TYC 1193 follows the factory pattern used in the later Cherokee, and the listing names the 1991-2000 model years. It is meant as a direct swap for a radiator that has clogged, split a tank or started weeping at a seam, using the original mounting points and hose connections.
TYC describes aluminum tubes with precision folded and louvered aluminum fins, sized to give flow comparable to the original part. The maker adds a few details aimed at the weak spots of older plastic-tank radiators: aluminum inlet rings, internal ribs in the tanks, expansion grooves and double header plates. Those features target the cracked necks and leaking seams that retire many stock XJ radiators after years of heat cycles.
This radiator suits an owner who wants the Cherokee to run the way it did from the factory, on stock tires and with ordinary driving. It does not add capacity for heavy towing or slow summer rock crawling, so a working Jeep may want a thicker core. The listing stops at the 2000 model year, so a 2001 owner should confirm fit, and every buyer should check engine and transmission on Amazon before ordering.
View TYC 1193 Radiator on Amazon
2. CSF 2671 Heavy Duty Radiator: 3-Row All-Metal Core for 1991-2001 Cherokee 4.0L

- Heavy duty 3-row all-metal core
- Fits 1991-2001 Cherokee 4.0L per listing
- Left-hand-drive models only
- Partslink CH3010186, CSF part 2671
CSF is a long-established radiator maker, and its part 2671 is a heavy duty version for the 1991-2001 Cherokee with the 4.0L inline six. The listing describes a three-row, all-metal radiator and notes that it fits left-hand-drive models only, which rules out right-hand-drive XJs. Partslink number CH3010186 is listed for cross-checking against the radiator you have now.
Three rows of tubes give the coolant more surface to shed heat than a thinner factory-style core, and an all-metal build avoids the plastic tank seams that crack on many stock radiators. That combination is aimed at a Jeep that works hard: towing a small camper, carrying a loaded roof rack or climbing slowly with the fan doing most of the work. The extra thickness also adds a little coolant volume to the system.
This radiator makes sense for a 4.0L XJ that runs warm under load even with a good fan clutch, cap and thermostat in place. It is more radiator than a stock commuter needs, and the four-cylinder 2.5L is not named in this listing. A thicker core can sit closer to the fan, so check clearance during the install, and confirm year, model and engine on Amazon before you buy.
View CSF 2671 Heavy Duty Radiator on Amazon

3. Mishimoto MMRAD-XJ-89: 2-Row Aluminum Radiator for 1989-2001 Cherokee XJ

- 2-row aluminum core, fully brazed
- TIG-welded aluminum end tanks
- 90% more coolant capacity than stock
- Listed for manual-transmission XJs
Mishimoto builds the MMRAD-XJ-89 for the Cherokee XJ from 1989 to 2001, and the Amazon listing describes it for models with manual transmissions. It uses a two-row aluminum core that is fully brazed, joined to TIG-welded aluminum end tanks in place of the factory plastic. Mishimoto states a 90 percent increase in coolant capacity over the stock radiator.
The maker also lists a 1.3 bar high-pressure cap, two condenser brackets, an overflow nipple, a fill neck plug and a magnetic drain plug in the package. Those extras matter because the XJ changed details over its run, and Mishimoto notes provisions for both open and closed cooling systems. The all-aluminum tanks remove the plastic seam that cracks on many older radiators after heat cycles.
This radiator suits a manual XJ that has been lifted, runs larger tires or spends weekends on slow trails where airflow drops. Automatic owners should confirm how transmission fluid will be cooled before choosing it, since the Amazon listing is written for manual models. A stock commuter will not gain much over a fresh factory-style core, and every owner should confirm year, model and engine on Amazon before buying.
View Mishimoto MMRAD-XJ-89 on Amazon
4. Auto Dynasty Tri-Core Radiator: 3-Row Aluminum with Transmission Cooler for 1991-2001 Cherokee

- 3-row core, 31 x 11.25 x 2.00 inches
- Built-in transmission oil cooler
- 1.25 inch inlet, 1.50 inch outlet
- Direct bolt-on, no drilling per listing
Auto Dynasty lists this three-row radiator for the 1991-2001 Cherokee with the inline six, the 1995-2000 Cherokee SE Sport four-cylinder and the 1991-1992 Comanche 4.0L. The core measures 31 by 11.25 by 2 inches, with an overall size of 35 by 11.5 by 2.5 inches. The inlet is 1.25 inches and the outlet 1.5 inches, matching the hoses the listing describes for these Jeeps.
The detail that sets it apart for many owners is the built-in transmission oil cooler, threaded 5/8-18 UNF. That lets an automatic XJ keep its cooler lines in the radiator tank the way the factory setup does, while gaining a thicker three-row core. The maker describes T-6061 aluminum for the core with plastic material used in the build, and a direct bolt-on fit without drilling.
This radiator suits an automatic XJ owner who wants more margin than a stock core for summer towing or trail weekends without adding a separate cooler. As a budget aluminum unit, check the tabs, necks and cooler fittings when it arrives before installing. It is not listed for the 1984-1990 Cherokee, and owners should confirm year, model, engine and transmission on Amazon before buying.
View Auto Dynasty Tri-Core Radiator on Amazon

5. ALLOYWORKS Aluminum Radiator Kit: Radiator, Shroud, Fans and Relay for 1991-2001 Cherokee XJ

- Radiator with shroud, fans and relay
- T-6061 aluminum construction
- Higher coolant capacity than stock
- Listed for 1991-2001 XJ 4.0L and Comanche
ALLOYWORKS sells this package for the 1991-2001 Cherokee XJ 4.0L and the Comanche, and it bundles more than a radiator. The listing includes an all-aluminum radiator along with a fan shroud, electric fans and a relay, making it a complete cooling package rather than a single replacement part. The maker describes T-6061 aluminum construction and more coolant capacity than a stock unit.
Many XJ owners move away from the engine-driven fan and clutch when the clutch wears out or when they want steadier airflow at low speed. A kit like this puts the radiator, shroud and fans together so the parts are meant to work as a set. The relay is there to carry the fan current, though you still need a way to switch the fans on at the right temperature.
This kit suits an owner planning an electric fan conversion who would rather buy one matched package than collect the parts separately. It asks more of the installer than a straight radiator swap, because the fans need wiring, a fused power feed and a trigger such as a thermostatic switch. If wiring is not your strength, a shop should handle it, and you should confirm year, model and engine on Amazon before ordering.
View ALLOYWORKS Radiator and Fan Kit on Amazon
6. Auto Dynasty 78 Radiator: 1-Row Aluminum Core for 1984-1990 Jeep Cherokee 4.0L

- Fits 1984-1990 Cherokee 4.0L, AT or MT
- 1-row core, 31 x 10-9/16 x 1-1/4 inches
- Transmission oil cooler included
- Replaces OEM 52003156 and related numbers
Early XJs use a different radiator from the later trucks, and this Auto Dynasty unit is one of the few listings built for them. It covers the 1984-1990 Cherokee and the 1987-1990 Comanche and Wagoneer, fitting 4.0L models with either an automatic or a manual transmission. The listing cross-references OEM numbers 52003156, 52003157, 52003693 and 52003694, plus Partslink CU78.
It is a single-row radiator with a T-6061 aluminum core measuring 31 by 10-9/16 by 1-1/4 inches, built to the factory footprint. The inlet is 1.5 inches and the outlet 1.25 inches, and a transmission oil cooler is included for automatic Jeeps. The maker describes a direct bolt-on fit with no drilling, using heat-resistant material for the tanks.
This radiator suits an owner keeping an early Cherokee on the road who needs a part that matches the original layout rather than an upgrade. It does not fit the 1991-2001 XJ, and the single-row core is not aimed at heavy towing. Since early Cherokees came with several engines over these years, read the engine coverage carefully and confirm year, model and engine on Amazon before buying.
View Auto Dynasty 78 Radiator on Amazon
How the Six XJ Radiators Compare
Find your model year first, then weigh the core against how you use the Jeep. Fit notes come from each Amazon listing.
| Radiator | XJ fit per listing | Core | Good match for |
|---|---|---|---|
| TYC 1193 | 1991-2000 Cherokee | Factory style, aluminum with plastic tanks | Stock daily drivers |
| CSF 2671 | 1991-2001 Cherokee 4.0L, left-hand drive | Heavy duty, 3-row all metal | Towing and hot summer trail use |
| Mishimoto MMRAD-XJ-89 | 1989-2001 Cherokee XJ, manual transmission | 2-row aluminum, welded tanks | Modified manual XJs |
| Auto Dynasty Tri-Core | 1991-2001 Cherokee I6, 1995-2000 SE I4 | 3-row aluminum with trans cooler | Automatic XJs on a budget |
| ALLOYWORKS kit | 1991-2001 Cherokee 4.0L | Aluminum with shroud, fans and relay | Electric fan conversions |
| Auto Dynasty 78 | 1984-1990 Cherokee 4.0L | 1-row aluminum with trans cooler | Early XJs |
On a stock Cherokee that sees mostly pavement, the factory-style core is plenty. Spend more on capacity only when the Jeep works hard, and pair it with a healthy fan and cap.

Check These Before You Blame the Radiator
Even the best radiator for Jeep XJ engines will not cure overheating that starts somewhere else. Check these parts first.
- Fan clutch: with the engine off and cold, a clutch that spins freely with no resistance is likely worn, and the temperature climbs at idle and low speeds.
- Fan shroud: a cracked or missing shroud lets the fan pull air around the core instead of through it.
- Cap and thermostat: a weak cap lowers the boiling point, and a stuck thermostat blocks flow no matter how big the radiator is.
- Water pump: a weeping seal or a wobbly pulley means the pump needs attention, and our water pump brand comparison and water pump picks for the Jeep 4.0 can help.
To cross-check a part number, Spectra Premium’s engine cooling catalog lets you search radiators by year, make, model and engine, and the CU numbers in this guide follow the same aftermarket numbering. If the old core is badly scaled, flush the block before the new radiator goes in, and our radiator flush comparison explains the options. Work only on a cold engine, and wear eye protection when you open the cooling system.

West Michigan puts an XJ through both extremes. Summer towing and slow two-track runs load the cooling system, while winter road salt eats at the radiator mounts and hose clamps, so check the brackets for rust during the swap.
When Overheating Points to Something Bigger
A check engine light after an overheat may come from a temperature sensor, a misfire or a lean code, and our article on a check engine light that stays on while the car runs fine covers the first steps.

A 4.0L that stumbles under throttle after a heat episode may have a sensor or fuel problem rather than a cooling one, which our guide to a car that hesitates when accelerating walks through. When codes keep returning, our check engine light diagnostic in Grand Rapids reads the data and traces the cause before you buy more parts.
More Buying Guides
Frequently Asked Questions
What is the best radiator for Jeep Cherokee XJ trucks that tow?
A higher-capacity core such as the CSF 2671 three-row suits a 4.0L that pulls a trailer, and manual owners can also look at the Mishimoto MMRAD-XJ-89. Pair it with a working fan clutch and shroud, since airflow at low speed matters as much as core size.
Will a 1991-2001 XJ radiator fit an older Cherokee?
No. The 1984-1990 Cherokee uses a different pattern, listed as CU78, while later XJs use the CU1193 pattern. Match the radiator to your model year and engine before ordering.
Does a 3-row radiator help a Jeep XJ 4.0L?
It adds coolant capacity and margin for towing, big tires and slow trail work. On a stock XJ with a healthy fan, cap and thermostat, a clean factory-style core usually keeps temperatures normal.
Do automatic XJs need a radiator with a transmission cooler?
The factory setup routes automatic transmission fluid through a cooler in the radiator tank. If the radiator you choose has no cooler, you need a separate one, so read the listing before buying.
Is your XJ running hot and you are not sure the radiator is to blame? Ring 456 AutoFix at 616-279-3832 on a weekday from 8am to 5pm, or send us a note through the contact page to set up a visit.
Busy at work while we are open? The after-hours drop-off at 456 Carrier St NE, Grand Rapids, MI 49505 lets you leave the Cherokee with us outside shop hours.
