As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Subaru that ticks like a playing card in the spokes every time you pull into a parking space is usually telling you an outer CV joint has lost its grease. The best CV axle for Subaru models is the one listed for your exact car, year and engine, because Subaru changed the front shafts between generations and even partway through a model year.
Below you will find how to read a Subaru axle listing, six front axles grouped by model and year, and a table to match them. If you want the bigger picture on makers first, our overview of CV axle brands explains new, remanufactured and OE-style lines.
Quick answer
Which CV axle should I buy for my Subaru?
Start with your model and year. A 2014-2018 Forester or 2017-2023 Impreza suits GSP’s PR66012, a 2018-2023 Crosstrek suits ECCPP’s NCV66080-style axle, and a 2020-2023 Outback or 2019-2022 Forester suits Maxfavor’s pair. Older cars have their own listings below, so always check the fit tool first.
Our Quick Picks
Three quick picks: GSP's axle for the 2014-2018 Forester and 2017-2023 Impreza, ECCPP's shaft for the 2018-2023 Crosstrek and Maxfavor's pair for the newest Outback. All six are reviewed below; confirm year, engine and trim on Amazon first.

GSP PR66012
GSP's OE-style front axle for two of Subaru's busiest models.

ECCPP Crosstrek CV Axle
A front axle for the second-generation Crosstrek.

Maxfavor Front CV Axle Pair
A matched front pair for the newest Outback, Legacy and Forester.
Why a Subaru Axle Needs a Careful Match
Nearly every Subaru sold in the US uses all-wheel drive, which means the car has a CV axle at each corner, not just two up front. MOOG’s explainer on CV axles notes that AWD vehicles carry four, and that a ruptured boot is one of the most common reasons they fail.
The front shafts steer as well as drive, so they take the most abuse, and the outer joint near the wheel is where clicking usually starts. The rear axles tend to last longer but can still tear a boot.
Fit is where Subaru gets tricky. Several models changed axles in the middle of a model year, and the listings in this guide mark those splits with a production date. The 2013-2014 XV Crosstrek and the 2014 Impreza WRX, for example, use one shaft if built before January 11, 2014 and a different one after.
Reading a Subaru CV Axle Listing
Before you add anything to your cart, compare these details with the shaft you are taking out:
- Model, year and engine: Subaru shares axles across the Forester, Impreza, Crosstrek, Legacy and Outback, but only within certain years. A listing title can be broader than its fitment notes.
- Transmission: some listings name the CVT or the manual gearbox, and the inner joint differs between them.
- Length and splines: the more detailed listings give compressed length plus inner and outer spline counts. Measure the old shaft if you are unsure.
- Single or pair: one part often fits either front side, so check the quantity on the listing. The part number on the old shaft is the best cross-check.
Best CV Axle for Subaru: Six Front Axles by Model
The list runs from the newest cars back to the early-2000s models. Enter your year, model, trim and engine in Amazon’s fit checker before you order any of them.
1. GSP PR66012: Front CV Axle for 2014-2018 Forester and 2017-2023 Impreza

- Front axle for 2014-18 Forester, 2017-23 Impreza
- Silent Ride Technology for a quieter drive
- Heat-treated components
- Stainless band clamps, limited lifetime warranty
GSP is one of the larger names in replacement CV axles, and the PR66012 is its front shaft for two common Subaru platforms. The listing title names the 2014-2018 Forester and the 2017-2023 Impreza. That pairing is handy if a household has one of each, since both cars can draw on the same part number, but it still pays to run your exact trim and engine through the fit checker.
GSP describes this axle as using its Silent Ride Technology, aimed at a smooth and quiet drive, which matters on a Subaru because owners are quick to notice a new vibration through the floor. The joints and shafts use heat-treated components for strength, and the boots are held by stainless steel band clamps that stand up better to salt than plain steel. GSP backs its CV axles with a limited lifetime warranty, according to the listing.
It suits a Forester or Impreza owner whose outer joint has started clicking or whose boot has split, and who wants an OE-style replacement from a familiar maker. It does not cover the 2019-and-later Forester or the Crosstrek on its title, so owners of those cars should look further down this list. Check whether you need one shaft or two before ordering.
2. TRQ Front CV Axle Pair: Driver and Passenger Shafts for 2010-2014 Outback and Legacy

- Driver and passenger front axles in one kit
- 2010-14 Outback and Legacy, 2014 Forester CVT
- Neoprene boots, direct-fit design
- Limited lifetime warranty
TRQ sells this kit with both front axles, one for the driver side and one for the passenger side. The listing names the 2010-2014 Outback and Legacy, along with the 2014 Forester fitted with the automatic CVT. That last detail matters, because a manual-transmission Forester from the same year may need a different shaft.
The reference list is long and useful for cross-checking. It includes Subaru numbers 28321AJ010 and 28321SG000, plus 66-07509, NCV66009 and NCV66012, so a quick look at the tag on your old axle should tell you whether this kit matches. TRQ says the axles use neoprene boots for durability and are designed as direct replacements that bolt in without changes. The company also points buyers to its library of DIY repair videos and covers the parts with a limited lifetime warranty.
A pair makes sense on a fourth-generation Outback that has crossed many winters, where both boots have had the same exposure to salt and slush. If one side is clicking and the other boot is cracked, doing both at once saves a second round of labor. It is not a match for the 2015-and-later Outback, so confirm your model year and transmission before buying.
View TRQ Front CV Axle Pair on Amazon

3. TRQ Front CV Axle Pair: 2 Shafts for 2015 XV Crosstrek and 2016-2017 Crosstrek

- Driver and passenger front axles
- 2015 XV Crosstrek, 2016-2017 Crosstrek
- Interchange 66-7576, NCV66050
- Neoprene boots, pre-assembled
The first-generation Crosstrek has a tangle of axle listings, and this TRQ kit covers the later part of it. It is listed for the 2015 XV Crosstrek and the 2016-2017 Crosstrek, with one driver side and one passenger side front axle in the box. If you own a 2013 or 2014 car, check the production date on the door jamb first, since cars built before January 11, 2014 use a different shaft.
The reference numbers on the listing are Subaru 28321FJ020, 66-7576 and NCV66050. Matching one of those against your old axle is the simplest way to confirm the kit is right. TRQ says its axles use neoprene boots and arrive pre-assembled as direct-fit replacements, so there is nothing to pack or press before installation. The brand also publishes how-to videos that walk through a typical axle swap.
These suit a Crosstrek that has spent its life on salted roads and now has torn or weeping boots on both sides. Crosstreks see a lot of gravel and dirt roads, which is hard on outer joints. The kit does not fit the 2018-and-later redesign, so owners of newer cars should look at the next pick. Confirm year and engine on Amazon before ordering.
View TRQ Crosstrek CV Axle Pair on Amazon
4. ECCPP CV Axle: NCV66080-Style Front Shaft for 2018-2023 Crosstrek

- 2018-23 Crosstrek 2.0L, 2021-23 2.5L
- 33.87 in compressed, 25 and 27 splines
- Axle nut included, M22 x 1.5
- Triple-layer boots, spin balanced
ECCPP lists this front axle for the second-generation Crosstrek, covering the 2018-2023 cars with the 2.0L engine and the 2021-2023 cars with the 2.5L. It gives NCV66080 as the interchange number, which is the reference many parts catalogs use for these years. The listing title does not say clearly whether you get one shaft or two, so check the quantity on the product page before you order.
The specs are laid out plainly, which helps on a car where small differences matter. The listing gives a compressed length of 33.87 inches, 25 splines on the inner shaft and 27 at the outer joint, and an M22 x 1.5 axle nut, which is included. There is no ABS ring on the axle. ECCPP says the shafts are heat-treated high-carbon steel, the boots use a triple-layer rubber build meant to resist cracking in heat and cold, and each shaft is spin balanced at the factory.
It suits a newer Crosstrek with a clicking outer joint or a split boot, especially one that sees gravel roads or winter salt. It does not fit the first-generation Crosstrek, so owners of 2017 and earlier cars should go back to the TRQ kit. If your car is a 2021 or later, note which engine it has before buying.
View ECCPP Crosstrek CV Axle on Amazon

5. Maxfavor Front CV Axle Pair: 2 Shafts for 2020-2023 Outback and 2019-2022 Forester

- 2 front axles, OE reference NCV66512
- 2019-22 Forester, 2020-23 Outback and Legacy
- Neoprene boots, moly grease
- Stainless clamps, ISO/TS16949 maker
Maxfavor lists this kit with two front axles for several recent Subarus. The fitment covers the 2019-2022 Forester with the 2.5L engine, the 2020-2023 Outback with the 2.5L, and the 2020-2023 Legacy with the 2.4L. It also names the 2006-2014 B9 Tribeca and Tribeca, all under the NCV66512 reference number.
The construction notes describe neoprene boots to keep dirt and water out, a moly grease formulated for high temperatures, and stainless steel clamps for strength. The axles arrive fully assembled, and Maxfavor says the threads and splines are precision rolled for a direct replacement. The maker states it holds ISO/TS16949 certification and asks buyers to check the full compatibility list or send a VIN if they are not sure about their car.
A pair is a sensible choice for a newer Outback or Forester that racks up highway miles and winter driving, since both front shafts have lived through the same salt and potholes. The listing names the 2.5L engine for the Outback, so owners of a turbocharged Outback XT should confirm fit before buying. Confirm your engine and trim on Amazon before ordering, and fit new axle nuts.
View Maxfavor Front CV Axle Pair on Amazon
6. MOOG 16E002: Front CV Axle with Rust-Inhibiting Coating for 2000-2004 Outback

- 2000-04 Outback, Legacy and Impreza
- 2000-02 Forester, 2003-06 Baja
- Coated shaft and housings resist rust
- Axle nut and inboard bolts included
MOOG is best known for steering and suspension parts, and its CV axle line follows the same problem-solving approach. The 16E002 is a front axle listed for the 2000-2004 Outback, Legacy and Impreza, the 2000-2002 Forester and the 2003-2006 Baja. Plenty of these cars are still on the road, and high-mileage examples often need fresh axles to keep going.
The feature that stands out for a salt-belt car is the coating. MOOG applies a rust-inhibiting finish to the intermediate shaft and to the inboard and outboard housings, aimed at the wear caused by rain, snow, salt and road grime. The boot is neoprene, and the bearings, races and housings are heat treated for joint strength and smooth articulation. The box includes the axle nut and inboard bolts where the car needs them, so you are not hunting for hardware halfway through the job.
It suits an owner keeping an early-2000s Subaru running who wants a known brand rather than the cheapest shaft. It is a single axle, so plan on two if both sides are worn. It does not fit later generations, and the Forester coverage stops at 2002. While the axle is out, check the hub bearing and ball joint, since worn parts nearby can shorten a new axle’s life.
Subaru CV Axles by Model and Year
Find your car, then confirm the listing with your VIN or the fit checker.
| Model and years | Axle from this guide | Sold as | Watch for |
|---|---|---|---|
| Forester 2014-2018, Impreza 2017-2023 | GSP PR66012 | Single, left or right | Confirm trim and engine |
| Outback and Legacy 2010-2014 | TRQ front pair | Pair | 2014 Forester only with CVT |
| XV Crosstrek 2015, Crosstrek 2016-2017 | TRQ front pair | Pair | Not for the 2018 body |
| Crosstrek 2018-2023 | ECCPP NCV66080 style | Check quantity | 2.5L only from 2021 |
| Forester 2019-2022, Outback and Legacy 2020-2023 | Maxfavor front pair | Pair | Engine size on the listing |
| Outback, Legacy, Impreza 2000-2004 | MOOG 16E002 | Single | Forester only to 2002 |
Crosstrek owners have the most to sort out. The best CV axle for Subaru Crosstrek cars depends on which side of three lines yours falls: the January 2014 production change, the 2018 redesign and the 2.5L engine that arrived for 2021.

Salt, Potholes and Split Boots in West Michigan
Grand Rapids winters are hard on the rubber that keeps axle grease in, and the best CV axle for Subaru drivers here is one that is installed before a torn boot ruins the joint. Cold boots stiffen and crack, freeze-thaw potholes yank the joints through big angles, and road salt chews at the clamps. Once a boot splits, slush gets in and the grease gets out.
Turn the steering to full lock and look behind each front wheel at every oil change. Dark grease sprayed across the inner rim or strut is the early warning.
If you swap an axle at home, lift the car on solid ground and support it on rated stands, never on the jack alone. Our jack stand picks for a home garage cover what suits a compact SUV. Wear eye protection, and fit the new axle nut and torque it to the figure in your service manual.

Clicking, Humming or a Warning Light?
A click on tight turns points to the outer CV joint, but plenty of Subaru noises come from somewhere else. A growl or hum that builds with speed and changes as you weave is more often a hub bearing, and our wheel bearing picks for Subaru cover that job. The same hum-versus-click test applies to bigger vehicles, which our wheel bearing guide for trucks walks through.
A vibration under acceleration can also come from the engine. If a light came on at the same time, read about a check engine light that stays on while the car runs fine, or book a check engine light diagnostic in Grand Rapids before you spend money on axles.

When the noise is clearly in the front end, our suspension repair service can check the axles, bearings, ball joints and tie rods together, so you know which part has actually worn out.
More Buying Guides
Frequently Asked Questions
What is the best CV axle brand for Subaru?
No single brand covers every Subaru well. GSP, TRQ, MOOG, ECCPP and Maxfavor all list front axles for specific Subaru years, so pick the brand whose listing names your model, year and engine, and whose specs match your old shaft.
Is an aftermarket CV axle OK on a Subaru?
Yes, as long as it is listed for your exact car. Some Subaru owners report vibration or clunks with budget shafts, so compare the length, spline counts and part numbers against the original before you install it.
Does my Subaru have rear CV axles?
Most do. Subaru’s all-wheel-drive models have two front and two rear CV axles. The front pair wears faster because it also steers, which is why this guide covers front shafts.
Should I replace both front axles at the same time?
It is not required. On a high-mileage Subaru with both boots cracked, a pair saves a second job later. If only one side has failed and the other boot is dry and intact, a single axle is enough.
Is your Subaru clicking through every turn out of the driveway? Ring 456 AutoFix at 616-279-3832 on a weekday between 8am and 5pm, or set up a front-end inspection through our contact page.
Tied up during our hours? Leave your keys with the after-hours drop-off at our Carrier St NE shop and we will take it from there.
