As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A worn hub on a GM three-row crossover rarely fails quietly. It starts as a low hum around 30 mph, turns into a growl that changes pitch when you drift through a long curve, and sometimes brings an ABS or traction light along with it. When owners price a replacement, the timken vs mevotech choice comes up fast, because both brands sell a hub for the same industry number.
That number is 513277, the bolt-on hub that Amazon sellers list for the 2009-2017 Chevrolet Traverse, 2007-2016 GMC Acadia, 2008-2017 Buick Enclave and 2007-2010 Saturn Outlook, at both the front and rear corners. Every part below carries it, so the comparison stays like for like. If you drive something else, our guide to wheel hub assembly brands covers more makes and part numbers.
Quick answer
Is a Timken or Mevotech 513277 hub the right call for a Traverse or Acadia?
Both replace the same 513277 hub, and each listing names the other’s part number. Choose Timken HA590227 if you value a long-established bearing maker and its stated stiffness gain. Choose Mevotech Supreme H513277 if you want its roll-formed preload and multi-point seal. Confirm your year and position in Amazon’s fit checker first.
Our Quick Picks
The Timken and Mevotech hubs for the same 513277 number on 2007-2017 Traverse, Acadia, Enclave and Outlook, plus ACDelco Gold 513277 as the GM-branded third option. All three are covered in full below.

Timken HA590227
A long-established bearing maker's version of the 513277 hub.

Mevotech Supreme H513277
Spells out its preload, sealing and durability testing.

ACDelco Gold 513277
GM's own aftermarket brand for the same hub number.
Two Different Companies Behind One Part Number
Timken is a bearing engineering company first, and its corporate site describes more than 125 years of specialized expertise across industrial and automotive motion parts. Its aftermarket hub units carry the same name as the bearings it supplies to rail, mining and factory customers. For a hub buyer, that history mainly shows up as a familiar box and a long catalog.
Mevotech is a Canadian chassis parts company that says technicians have trusted it since 1982. It built its name on control arms, ball joints and links, then added wheel hub assemblies to the range. Supreme is its main replacement line, and it also sells a separate TTX Terrain Tough family.
What the 513277 number tells you
Hub makers share a common numbering system, so 513277 points to one physical design: the flange, bolt pattern, pilot, spline count and sensor provision that GM used on these crossovers. Timken calls its version HA590227, and Mevotech adds an H to make H513277. Each listing prints the other’s code in its replacement list, which is about as clear a cross-reference as you will get.
A shared number does not mean the parts are identical inside. Bearing steel, seal design, grease and quality control are where brands differ, and none of the three listings below publishes load ratings or test hours. What the number does guarantee is that each one is meant to bolt into the same knuckle and accept the same axle.
Timken vs Mevotech Side by Side
This table sticks to what each Amazon US listing actually states for its 513277 hub. Where a listing says nothing on a point, the cell says that too, rather than filling the gap with a guess.
| Point | Timken HA590227 | Mevotech Supreme H513277 |
|---|---|---|
| Interchange printed | 513277, H513277, BR930532 and GM numbers | 513277, HA590227, BR930532 and GM numbers |
| Design claim | Integrated raceway and hub, up to 30 percent stiffer than conventional setups | Roll-formed to lock internals at a set preload |
| Sealing | Sold pre-sealed | Multi-point sealing system |
| Grease | Pre-greased | Pre-filled with premium high-temperature grease |
| Testing stated | Not stated | In-house and third-party durability testing |
| Warranty in listing text | Not stated | Not stated |
Read that way, the two listings stress different things. Timken talks about the structure of its integrated hub unit, while Mevotech talks about how its unit is assembled, sealed and tested. Neither gives a warranty term in the listing text, so check the box or the seller’s page before you count on coverage.
Timken vs Mevotech Wheel Bearing Hubs: The Three 513277 Units in Detail
All three listings below carry the 513277 number. Enter your year, model and drive type in Amazon’s fit checker before you order, and remember that the 2018 and later Traverse moved to a different platform with its own hubs.
Timken HA590227: Preset, Pre-Greased and Pre-Sealed Hub Unit, Replaces 513277 and H513277

- Preset, pre-greased and pre-sealed hub assembly
- Replaces 513277, H513277, BR930532 and GM 22756832
- Integrated raceway and hub for added stiffness
- Narrow package lowers unsprung weight
HA590227 is Timken’s code for the 513277 hub, and the listing title spells that out by naming 513277, Mevotech’s H513277 and SKF’s BR930532 among the parts it replaces, along with GM numbers such as 22756832 and 25784448. It arrives as a complete hub assembly that is preset, pre-greased and pre-sealed, so there is nothing to adjust or pack before it goes on.
Timken says the integrated raceway and hub design raises stiffness by as much as 30 percent compared with conventional systems. The listing also points to a narrow overall width and a thinner radial section, which it says cut unsprung weight. In plain terms, the bearing races are part of the hub forging itself, which helps the corner resist flex under cornering and braking loads on a heavy three-row crossover.
This is a sensible choice for a Traverse, Acadia or Enclave you plan to keep for several more winters, where a familiar bearing name matters to you. The API listing text does not state a warranty term or name the vehicles directly, so run the fit checker for your year and position, and match the sensor connector to your old hub before installing it.
View Timken HA590227 on Amazon

Mevotech Supreme H513277: Wheel Bearing and Hub Assembly Kit, Replaces HA590227 and 513277

- Roll-formed design locks a set preload
- Replaces HA590227, 513277, BR930532 and GM 15918787
- Pre-filled premium high-temperature grease
- Multi-point seal plus in-house and third-party testing
Mevotech’s Supreme H513277 is the brand’s main replacement hub for this number, and its listing prints a long cross-reference list that includes Timken HA590227, 513277, 513277E, BR930532 and GM numbers such as 15918787 and 25784448. That makes it easy to confirm that it is meant to replace the same original hub as the Timken unit above.
The listing says the hub is roll formed to lock the internal parts at a set preload straight out of the box, with the added stiffness meant to cut vibration and extend part life. It comes pre-filled with a premium grease rated for high temperature and extreme pressure, and a multi-point sealing system is there to keep water and grit out. Mevotech also states that the design goes through in-house and third-party durability testing.
This hub suits owners who want to see more detail about assembly and sealing before buying. Mevotech also sells an H513277HW kit that adds fastening hardware and torque specifications in the box, which is worth a look if your hub bolts are rusted. No warranty term appears in the listing text, so confirm coverage and fit for your year before ordering.
View Mevotech Supreme H513277 on Amazon
ACDelco Gold 513277 (19340148): Wheel Hub and Bearing Assembly with Multi-Lip Seal

- GM aftermarket brand, part number 19340148
- Multi-lip seal with extreme temperature materials
- High carbon clean steel for quiet running
- Same 513277 interchange as Timken and Mevotech
ACDelco is GM’s own aftermarket parts brand, so it makes a natural third option for a Chevrolet, GMC or Buick crossover. This Gold listing carries the same 513277 number as the Timken and Mevotech hubs, along with ACDelco part number 19340148. It is a complete hub and bearing assembly, not a bare bearing, and it bolts into the knuckle the same way as the other two.
The listing highlights a multi-lip seal design made with extreme temperature seal materials, which is meant to keep road spray and grit away from the rolling elements. It also says the bearing uses high carbon clean steel for smooth and quiet operation. Beyond that, the description stays general, so it does not publish preload, testing or stiffness claims the way the other two listings do.
The Gold hub fits owners who would rather stay with a GM-branded part, or who want a third brand to compare when the first two are out of stock. As with the others, the API listing text does not state the warranty or name each vehicle, so use the fit checker and compare the flange and connector with your old hub before you install it.
View ACDelco Gold 513277 on Amazon

Matching the Hub to How Long You Will Keep the Crossover
Most people shopping this part are not chasing performance. They want the hum gone, the warning lights off and the vehicle safe for another few years, so the plan for the vehicle matters more than the logo on the box.
| Your situation | Closer match | Why |
|---|---|---|
| Keeping a high-mileage Acadia for years | Timken HA590227 | Established bearing maker with a stated stiffness gain |
| You want seal and assembly detail | Mevotech Supreme H513277 | Listing spells out preload, sealing and testing |
| You prefer the GM-branded part | ACDelco Gold 513277 | GM’s aftermarket brand, part 19340148 |
| One corner hums, the other is quiet | Any of the three | Replace the noisy hub, then recheck the other side |
| Hub is rusted solid in the knuckle | Book shop time | Removal, not the part, is the hard step |
Before you buy any hub, make sure the hub is really the problem. Our article on wheel bearing noise symptoms explains how to separate a bearing hum from tire noise, and our piece on how long wheel bearings last covers what shortens their life. Cupped tires and a loose CV joint can both sound a lot like a bad bearing at highway speed.

If you have already read our Timken and MOOG hub comparison on a Silverado, the same pattern holds here. The established names publish a little more about design, and the real differences show up over years of salt, potholes and heavy loads rather than on the first drive.
Swapping a 513277 Hub at Home
On these crossovers the 513277 hub bolts to the steering knuckle, so you do not need to press a bare bearing in or out. That is a big difference from older press-in designs, where a wheel bearing press kit or a shop press is the only safe way to do the job. Here the work is mostly unbolting, cleaning and bolting back up.
The usual order is axle nut first with the wheel on the ground, then the caliper and bracket hung out of the way, the rotor off, the wheel speed sensor connector unplugged and the hub bolts removed from the back of the knuckle. Compare the new hub’s connector and flange with the old one before anything goes back together. Torque the hub bolts and the axle nut to the values in the service manual for your year, not to a number from a forum post.

Do not panic if the new hub feels firm when you spin it by hand. The GMB tech team explains that new pre-greased hub assemblies can feel stiff because they leave the factory packed with thick, high-load grease that frees up after a few miles. A hub that grinds or screeches is a different story and should go back.
Salt, Rust and Heavy Crossovers in Grand Rapids
The Traverse, Acadia and Enclave are heavy vehicles that often carry a full load of people and gear, and every corner sees that weight on every pothole. Freeze-thaw cycles in West Michigan open new holes each spring, and a hard hit can rough up a bearing that was already near the end of its life.

Road salt causes the bigger headache at removal time. The hub pilot can rust into the knuckle so tightly that the bolts come out but the hub will not move, and the sensor connector can crumble when you unplug it. Soak the joint with penetrating oil the night before, clean the knuckle bore to bare metal and add a thin film of anti-seize on reassembly if the service manual allows it.
When a Hub Job Belongs in a Shop
A seized hub, a stripped hub bolt, an ABS light that stays on after the swap or no safe way to lift a heavy crossover are all good reasons to let a technician handle it. A lit ABS lamp can point to the sensor, the connector or the tone ring, and our guide to why the ABS light comes on explains the usual causes.
We do wheel bearing replacement in Grand Rapids on foreign and domestic vehicles, including bolt-on hubs that have rusted in place. Hendrick Hoffman holds ASE and State of Michigan certification in steering and suspension and in brakes, the two systems you take apart to reach a hub.
More Buying Guides
Frequently Asked Questions
Is Mevotech as good as Timken for wheel hubs?
In the timken vs mevotech question there is no published test that crowns a winner. Both sell a 513277 hub that lists the other’s part number, and both are pre-greased and sealed. Timken stresses its integrated hub design, while Mevotech stresses preload, sealing and durability testing, so pick the one whose details matter more to you.
Does the 513277 hub fit the front and rear of a Traverse?
Amazon sellers list 513277 for both front and rear positions on the 2009-2017 Traverse and its GM siblings. Drive type and options can change the part, so enter your exact year, model and drivetrain in the fit checker and compare the new hub with the old one before installing it.
Do I need a press to replace this hub?
No. The 513277 is a complete hub assembly that bolts to the knuckle, so there is no bearing to press. You may still need penetrating oil, a hub puller or a slide hammer if rust has locked the hub into the knuckle.
Should I replace both hubs on the same axle?
It is not required the way it is with brake pads or struts. Many owners replace only the noisy corner, then listen to the other side, since the opposite hub has covered the same miles and may not be far behind.
Still hearing that growl from one corner of your crossover? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or request a hub inspection through our contact page.
If daytime hours do not work, drive it to 456 Carrier St NE once we close and use the after-hours drop-off, with a note on which wheel is making the noise.
