As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A worn mount rarely fails all at once. It starts as a buzz through the steering wheel at a red light, then a thud when you pull away. Choosing the best engine mount brand matters less than matching the right mount type and part number to your car, but the name on the box still decides how closely that part copies the original.
Below we cover how mounts differ and how to judge a maker, then review six listings from established brands. Each is vehicle-specific, so confirm your own part on Amazon before ordering.
Quick answer
Which engine mount brand should you buy?
For a daily driver, pick an OE-style replacement from an established mount maker such as Anchor, DEA or Westar, in the same type as the original: rubber, hydraulic or vacuum. Audi owners can look at Lemforder sets. Polyurethane mounts like Energy Suspension suit performance builds. Confirm year, model and engine on Amazon first.
Our Quick Picks
Three quick picks: an Anchor OE-style rubber mount, a DEA hydraulic mount and an Energy Suspension polyurethane mount for performance builds. All six listings, including a Westar kit, a Pioneer Ford mount and a Lemforder Audi pair, are reviewed below; confirm year, model and engine on Amazon before ordering.

Anchor 9957
A long-running aftermarket name for like-for-like mount swaps.

DEA A4526HY
Keeps fluid-filled damping where the car came with it.

Energy Suspension 3.1114G
Firm mount that resists oil and does not sag.
What a Mount Actually Does, and the Three Ways It Is Built
An engine mount holds the engine to the body or subframe and soaks up the shake the engine makes as it runs. Most cars use three or four mounts, often a mix of engine mounts, a transmission mount and a torque strut that stops the engine rocking forward and back. When one sags or tears, the others take more load and tend to follow.
- Solid rubber: a rubber block bonded between steel brackets, common on older cars and many trucks.
- Hydraulic (fluid-filled): a rubber body with a sealed fluid chamber that damps idle vibration. A wet, oily mount has often leaked.
- Vacuum or electronic: an active mount whose stiffness the engine computer controls. Replace it with the same design.
- Polyurethane: an aftermarket upgrade that resists oil and does not sag, but passes more vibration into the cabin.
Good Engine Mount Brands: How to Judge a Maker
Good engine mount brands share habits you can check from the listing alone. They publish a part number you can cross-reference, state the position (front, rear, left, right, torque strut) and say whether the part is rubber, hydraulic or something else. A listing that claims to fit every car is a warning sign.
- Part number first: look up the number for your vehicle, then compare brands that make that number. Anchor and Westar, for example, both sell an EM-3103 style mount.
- Same type as the original: swapping a hydraulic mount for a solid one can add vibration. Some makers sell both versions of one part, so read the description.
- Single part or kit: a kit replaces every mount at once, which suits a high-mileage car with several tired mounts.
- Maker history: Westar describes itself on its official site as a mount specialist since 1986, which is the kind of track record worth looking for.
Best Engine Mount Brand Picks: Six Listings Reviewed
Each pick below is one real listing from a maker we would shortlist when looking for the best engine mount brand for a given car. The specific part numbers fit only certain vehicles, so use them as a starting point and search the same brand for your own model.
1. Anchor 9957 Engine Mount: OE-Style Replacement Built to Original Specs

- Direct replacement engine mount
- Designed to meet or exceed original part specifications
- Listing says it fits various makes and models
- Seller asks buyers to check vehicle fitment
Anchor is a familiar aftermarket mount name, and its catalog is built around part numbers that cross-reference the original equipment. The 9957 listing is a good example of how the brand sells: one mount, one number, meant to bolt in where the old part came out.
The listing describes the 9957 as an exact-fit, original-style replacement designed to meet or exceed the specifications of the part it replaces. It says the mount is made from quality raw materials and fits various makes and models, which is a reminder that a single number can cover more than one vehicle line. That is also why the seller asks you to check fitment before buying. Anchor uses a numbering pattern shared with other aftermarket makers, so the number on your old part or an online catalog lookup will lead you to the right Anchor equivalent.
This kind of mount suits a commuter car or family vehicle whose original mount has sagged or torn and that you want to drive the way it did when new. It is not a performance upgrade and will not stiffen the drivetrain. Look up the Anchor number for your own car, then confirm year, model and engine on Amazon before you order.
2. Westar ETK-052 Engine Mount Kit: Multi-Mount Set Made to OEM Specs

- Engine mount kit rather than a single part
- Designed to meet or exceed OEM quality, fit and function
- Made to ISO, QS and TS factory standards
- Matches rubber, hydraulic, vacuum or electronic designs
When one mount fails at high mileage, the rest are rarely far behind, and Westar’s ETK kits are built for that situation. Instead of ordering a single mount and waiting to see whether the vibration goes away, a kit like the ETK-052 bundles the mounts a particular vehicle uses so they can be replaced together.
Westar’s listing says its parts are designed to meet or exceed OEM specifications on quality, fit and function, and that its factories work to ISO, QS and TS standards. It also says each part is designed for the specific vehicle, whether that vehicle uses a rubber, hydraulic, vacuum assisted or electronic mount. That matters, because mixing mount types is one of the common causes of new vibration after a repair.
A kit makes the most sense on an older car where you can see cracked rubber on several mounts, or where a shop has already found more than one worn part. If only one mount is bad on a newer car, a single Westar mount may be enough. Either way, check that the kit is listed for your year, model and engine on Amazon.
View Westar ETK-052 Kit on Amazon

3. DEA A4526HY Front Engine Mount: Hydraulic OE-Style Design

- Front engine mount position
- OEM-style hydraulic design
- Solid version sold separately as DEA A4526
- Tested to meet or exceed the original mount's specs
DEA Products is a mount maker that labels its hydraulic and solid versions clearly, and the A4526HY shows why that helps. The HY suffix marks this front engine mount as the hydraulic version, and the listing points to a solid alternative sold as the A4526. That makes it easy to stay with the type your car was built with.
According to the listing, DEA has been making engine and transmission mounts for the aftermarket for more than 30 years. It says the company uses quality raw materials and that its products are tested to meet or exceed the original mount’s specifications. The listing describes this part as an OEM hydraulic design, meaning a fluid chamber inside the rubber body helps calm vibration at idle. A hydraulic mount that has leaked often looks wet or oily, which is a useful clue when you inspect the old one.
Choose this style if your car shipped with fluid-filled mounts and you want the cabin to stay as quiet as it was. Fitting a solid mount in its place can work, but it may pass more vibration through the floor and steering wheel. The A4526HY fits select applications only, so confirm year, model and engine on Amazon before you buy.
4. Pioneer Sure-Fit 615631: Front Engine Mount for Select Ford and Lincoln Models

- Listed for select Ford and Lincoln models
- Front mounting position
- Built to fit and function like the original part
- Amazon Garage fit check recommended by the listing
Pioneer Automotive Industries makes cables, flexplates and mounts, and its Sure-Fit line is aimed at owners who want a replacement that goes in like the factory part. The 615631 is listed as a front engine mount for select Ford and Lincoln models, which makes it a useful example for domestic car and SUV owners.
The listing says the mount is made to fit and function like the original part, and it names the front mounting position. Pioneer’s wider Sure-Fit range is described on other listings as using premium rubber compounds, with hydraulic control where the application needs it, and as being tested on vehicle-specific fixtures so the bolt holes line up. For this part, the listing goes a step further on fit: it asks you to enter your vehicle in Amazon Garage and read the Confirmed Fit bar, plus any notes marked with a blue information icon, before you buy.
This mount suits a Ford or Lincoln owner who has traced a vibration or clunk to the front mount and wants a like-for-like part. It does not cover every Ford, and the listing only says select models, so the fit check matters here. Confirm your year, model and engine on Amazon.
View Pioneer Sure-Fit 615631 on Amazon

5. Lemforder 2-Piece Engine Mount Set: Pair for Audi 2.0L Automatic Models

- Two-piece engine mount set
- Listed for Audi A4, A5, allroad and Q5
- Also names the Porsche Macan 2.0L
- Title specifies 2.0L engines with automatic transmission
Lemforder is a European chassis and rubber-to-metal parts brand that Audi owners often meet when shopping for mounts. This listing, from the seller Newparts, is a two-piece set aimed at the 2.0L Audi A4, A5, allroad and Q5 with an automatic transmission, and it also names the Porsche Macan 2.0L.
The listing gives little beyond its title, so treat that title as the fit statement and nothing more. Selling the mounts as a pair makes sense on these cars, because both engine mounts age at a similar rate and replacing one often leaves the other side noticeably softer. Audi 2.0L models were built over many years with changes in drivetrain and mount design, so a set listed for the model name may not suit every year or option code. Your VIN is the most reliable way to check which mount your car left the factory with.
This set suits an owner of one of the listed Audi 2.0L automatics who wants matched mounts from a recognized European name. It is not a universal Audi part and does not cover manual transmission cars by its title. Confirm year, model, engine and transmission on Amazon, and for Audi-specific questions our Audi repair team in Grand Rapids can help.
View Lemforder Audi Mount Set on Amazon
6. Energy Suspension 3.1114G: Zinc-Plated Polyurethane Engine Mount for GM

- Hyper-Flex polyurethane construction
- Zinc-plated hardware
- Listed as an engine mount for GM applications
- Resists oils and contaminants that degrade rubber
Energy Suspension takes a different approach from the OE-style brands above. Instead of rubber, its mounts use the company’s Hyper-Flex polyurethane, and the 3.1114G is a zinc-plated engine mount listed for GM applications. It is the pick here for owners who want a firmer mount rather than a factory feel.
The listing says Hyper-Flex polyurethane stands up well to the contaminants that often break down rubber, and that it is engineered to last longer without compressing permanently. Engine oil leaks are a common reason rubber mounts soften and tear, so a material that shrugs off oil can make sense on an older engine that weeps a little. The zinc plating on the metal parts helps them resist corrosion, which is worth having on a vehicle that sees salted winter roads.
The trade-off is comfort. A firm polyurethane mount transfers more engine vibration and noise into the cabin than a rubber mount, particularly at idle, so it suits a classic GM V8, a weekend car or a performance build more than a quiet daily commuter. Check that the listing names your engine and chassis, and confirm year, model and engine on Amazon before ordering.
View Energy Suspension 3.1114G on Amazon
Matching Mount Type and Maker to Your Vehicle
Picking the best engine mount brand starts with the mount type. Use this table as a starting point, not a fit chart.
| Your situation | Mount type to match | Brands from this list |
|---|---|---|
| Daily driver with original rubber mounts | OE-style solid rubber | Anchor, Westar, Pioneer |
| Car that came with fluid-filled mounts | Hydraulic | DEA, Westar, Pioneer |
| High-mileage car with several worn mounts | Complete kit | Westar |
| Audi 2.0L with automatic transmission | Pair listed for the model | Lemforder |
| Older GM V8 or performance build | Polyurethane | Energy Suspension |
Replacing a sensor at the same time? Our guide to the mass air flow sensor brands worth buying follows the same rule: part number first, maker second.

West Michigan roads are hard on mounts. Freeze-thaw potholes jolt the subframe, salt spray reaches the brackets and cold starts stiffen the rubber. A cracked mount often shows itself first on a January morning, with a heavy shudder at startup.
If you check or change one yourself, support the vehicle on rated jack stands, never on a floor jack alone. Support the engine only the way the service manual describes, and wear eye protection under the car.

Shudder, Thud or Something Else: When to Have It Checked
A worn mount usually shows up as vibration at idle that eases when you shift to neutral, a thud when you shift into drive or reverse, or visible engine movement when someone revs it with the hood open. A clunk over bumps can also come from suspension parts, which our article on a clunking noise over bumps walks through.
Not every shake is a mount. A misfire can feel like a bad mount at idle, and a stumble from the engine can feel like a lurch, which is why our guide on a car that hesitates when accelerating is worth reading before you buy parts. If the dash light is on too, our check engine light diagnostic service in Grand Rapids can read the codes and point to the real cause.

A light that comes on while the car still drives normally does not always mean a hard part has failed, as our post on a check engine light on while the car runs fine explains. For knocks from under the car, our suspension repair team can inspect the bushings and links before you order parts.
More Buying Guides
Frequently Asked Questions
What are the best engine mount brands for a daily driver?
For everyday cars, look at established mount makers that sell OE-style parts by part number, such as Anchor, DEA, Westar and Pioneer. Pick the one that lists your exact vehicle and matches the original mount type, whether rubber or hydraulic.
Can I replace a hydraulic engine mount with a solid one?
Some makers sell both versions of one part, such as DEA’s A4526HY hydraulic mount and its solid A4526 option. A solid mount often passes more vibration into the cabin, so most owners stay with the type the car came with.
Should I replace all engine mounts at once?
Not always, but when one mount has torn, the others have carried extra load. On a high-mileage car, replacing the full set or a kit often avoids a second job a few months later. Inspect every mount before deciding.
Are polyurethane engine mounts good for street driving?
They resist oil and do not sag like worn rubber, which suits performance and older V8 builds. The trade-off is more vibration and noise inside the car, especially at idle, so many daily drivers are happier with OE-style rubber.
Feeling a shake you can’t pin down? Ring us at 616-279-3832 between 8am and 5pm, Monday through Friday, or set up a visit on our contact page.
If your workday runs into our hours, the after-hours drop-off at our shop on 456 Carrier St NE, Grand Rapids, lets you leave the keys and the car whenever it suits you.
