456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

RAV4 to Lifted Tacoma: Choosing the Best Floor Jack for Toyota Models

best floor jack for toyota: old residential house with weathered garage doors in an urban setting

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Toyota builds everything from a low Corolla to a lifted Tacoma, so no single jack height suits the whole badge. The best floor jack for Toyota owners is the one whose lift range matches the model in your driveway, and if you keep a RAV4 next to a 4Runner, that range has to stretch across both.

Below: Toyota jack points, the height you need and six 3 ton jacks. If you are still filling out a home garage, our beginner car maintenance tool list puts the jack in context with the rest of a starter kit.

Quick answer

Which floor jack fits a Toyota car, SUV or truck?

Match the jack’s listed range to your model. A stock Tundra or 4Runner suits the AUTOWN 3 ton at 7.1 to 20.9 inches, a lifted Tacoma needs the taller reach of the GAOLLY big wheel jack, and the VEVOR 3 ton starts at 3.35 inches for a RAV4 or Camry.

Our Quick Picks

Three jacks for the three heights a Toyota garage usually sees: a stock full-size truck, a lifted midsize truck and a low crossover or sedan.

AUTOWN 3 Ton Floor Jack product photo
Stock full-size

AUTOWN 3 Ton Floor Jack

3 ton, 7.1 to 20.9 in.

A tall-starting steel jack sized for pickups and big SUVs.

SuitsStock Tundra, Sequoia and 4Runner
View on Amazon →
GAOLLY 3 Ton Big Wheel Jack product photo
Lifted trucks

GAOLLY 3 Ton Big Wheel Jack

3 ton, 5.9 to 28.9 in.

The tallest reach in this list, on wheels that handle gravel.

SuitsLifted Tacoma and 4Runner builds
View on Amazon →
VEVOR 3 Ton Low Profile Jack product photo
Widest range

VEVOR 3 Ton Low Profile Jack

3 ton, 3.35 to 19.69 in.

One steel jack that reaches from a low sedan to a midsize SUV.

SuitsRAV4, Camry and Highlander garages
View on Amazon →

Two Toyota Families, Two Kinds of Lift Point

Most Toyota cars and crossovers, including the Corolla, Camry, Prius, RAV4 and Highlander, use unibody construction. They are lifted at reinforced points along the rocker seam or at a front and rear center point shown in the owner’s manual. A rubber saddle pad keeps the pinch weld from folding under the load.

The Tacoma, 4Runner, Tundra and Sequoia sit on a separate frame. On these trucks the usual garage points are the frame rails and the rear axle housing, and the jack’s saddle has to reach higher before it even touches metal. Toyota lists the exact points for each model, and the Toyota owner’s manual library lets you pull up yours by year and model before you lift. Keep the saddle off the front suspension arms, which can shift under load.

Working Out the Lift Height Your Toyota Needs

Start with a tape measure. Measure from the floor to the jack point you plan to use, then add the few inches it takes for the tire to leave the ground once the suspension droops. The result is the minimum top height your jack must reach, and you want some room above it so a stand can slide in.

The low end matters for cars. A Camry or Corolla with an aero tray under the nose may need a saddle that starts under 4 inches, which our guide to the low profile floor jack for cars with little clearance explores in depth. A Tundra, on the other hand, will never test the low end of any jack here.

Capacity rarely limits a Toyota owner, since a floor jack raises one end at a time. Height is what decides the best floor jack for Toyota trucks, especially after a leveling kit or a lift.

Best Floor Jack for Toyota Owners: Six Jacks Up Close

Every capacity and height below is quoted from the Amazon listing, not measured by us. Check each figure against the jack point on your own Toyota before you order.

1. AUTOWN 3 Ton Floor Jack: 7.1 to 20.9 in. Lift with Cross-Shape Rubber Pad

AUTOWN 3 Ton Floor Jack product photo
Key features
  • 3 ton (6,600 lb) listed capacity
  • 7.1 to 20.9 in. lifting range
  • Cross-shape rubber pad for round and flat points
  • Handle comes apart and jack folds flat

AUTOWN builds this 3 ton jack from heavy-gauge alloy steel and rates it at 6,600 pounds. Its listed range runs from 7.1 to 20.9 inches, which puts the saddle well up into frame-rail territory before you pump at all. The listing names pickups, full-size SUVs, crossovers and vans as the target and asks sedan owners to measure clearance first.

For a stock Tundra, Sequoia or 4Runner, that tall start saves strokes, and the top height leaves room to set a stand under the frame. The saddle carries a cross-shaped rubber pad meant to sit on both round axle tubes and flat frame sections, which helps on a truck where you switch between the two. A rapid lift system raises the saddle to the load with fewer early pumps, and a precision release valve controls the way down.

When the job is done, the quick-connect handle comes off and the jack folds flat, which helps in a crowded garage. The 7.1 inch minimum is the trade-off: it will not slide under a Corolla, Camry or lowered car, so a household with a low sedan will need a second jack. It is a lifting tool only, so put stands under the truck before working.

View AUTOWN 3 Ton Floor Jack on Amazon

2. GAOLLY 3 Ton Big Wheel Off-Road Floor Jack: 5.9 to 28.9 in. Dual Pump Lift

GAOLLY 3 Ton Big Wheel Jack product photo
Key features
  • 3 ton (6,600 lb) listed capacity
  • 5.9 to 28.9 in. lift range
  • Dual pump quick lift
  • Big wheels and alloy steel chassis

The GAOLLY is a 3 ton big wheel jack with a listed range of 5.9 to 28.9 inches, the tallest top height of the six. It is rated at 6,600 pounds and built on an alloy steel chassis, with a dual pump that cuts the number of strokes to reach the load. Big wheels let it roll across gravel or a rough driveway as well as concrete.

That 28.9 inch ceiling is the reason to look at it for a lifted Tacoma or 4Runner. Once a truck carries a lift and larger tires, the frame and axle sit much higher, and many standard jacks top out before the tire leaves the ground. Measure your own jack point and add tire clearance to confirm the GAOLLY covers it, since lifts vary widely.

The 5.9 inch minimum also lets it slide under a stock truck or many crossovers, so it can serve more than one vehicle. The size that gives it reach makes it heavier and bulkier to store than a standard trolley jack. As with any jack, lift only from a solid frame or axle point and move the load onto rated stands that reach the same height.

View GAOLLY 3 Ton Big Wheel Jack on Amazon

high-angle shot of a deserted city intersection illuminated by street lights at night

3. VEVOR 3 Ton Low Profile Floor Jack: 3.35 to 19.69 in. Dual Piston Quick Lift

VEVOR 3 Ton Low Profile Jack product photo
Key features
  • 3 ton (6,600 lb) listed capacity
  • 3.35 to 19.69 in. lift range
  • Dual pump reaches max height in 7 strokes
  • Listing cites ASME PALD-2014

VEVOR lists this steel floor jack at 3 tons, or 6,600 pounds, with a range from 3.35 to 19.69 inches. That spread is the widest of the car-height jacks here, which makes it a practical single jack for a garage holding a Camry and a Highlander or a RAV4. The dual parallel pump is listed as reaching full height in seven strokes.

The low entry clears a sedan’s front lip, and the top height still gets a crossover’s tire off the floor with room for a stand. A rubber saddle and a foam handle bumper protect paint and pinch welds, and the 360 degree saddle can be detached and replaced. The 52 inch handle gives leverage and splits into two pieces for storage.

The listing states compliance with ASME PALD-2014 and European EN1494 standards and includes a built-in overload valve. Steel construction makes it heavier than an aluminum jack, so it suits a garage where it rolls rather than one where you carry it to the car. A lifted Tacoma or 4Runner will likely need more height than 19.69 inches provides, but for a sedan and crossover pairing it is the simplest single purchase in this guide.

View VEVOR 3 Ton Low Profile Jack on Amazon

4. Road DAWG 3 Ton Aluminum Big Wheel Off-Road Floor Jack: 5.98 to 23.86 in. with SUV Adapter

Road DAWG Aluminum Big Wheel Jack product photo
Key features
  • 3 ton (6,000 lb) listed capacity
  • 5.98 to 20.87 in., 8.98 to 23.86 in. with adapter
  • Triple-piston hydraulic system
  • 5.91 in. wheels and 4.51 in. swivel casters

Road DAWG makes this 3 ton big wheel jack from aluminum with a corrosion-resistant coating, and rates it at 6,000 pounds. Without adapters it lifts from 5.98 to 20.87 inches. With the included SUV adapter the range becomes 8.98 to 23.86 inches, which adds useful height for a truck with a modest lift.

The wheel layout is built for rough ground: 5.91 inch straight wheels at the front and 4.51 inch swivel casters at the back. That combination helps on a gravel driveway, a grass yard or a trailhead, where a standard trolley jack tends to dig in. A triple-piston hydraulic system raises the saddle, and the listing describes the adapter as giving steadier contact with truck and SUV frames.

For a Tacoma or 4Runner on stock or slightly raised suspension, the 23.86 inch maximum may be enough, but a tall lift calls for checking the numbers carefully. The listing mentions tires up to 40 inches and a 2 year warranty against defects. Remember that soft ground is not a safe base for stands, so do the real work on firm pavement. Seat the adapter fully in the saddle before it takes any weight.

View Road DAWG Aluminum Big Wheel Jack on Amazon

mechanic in blue overalls working with tools in a smoky garage workshop

5. BIG RED 3 Ton Aluminum and Steel Floor Jack: 3-15/16 to 18-5/16 in. Dual Piston Pump

BIG RED 3 Ton Aluminum Jack product photo
Key features
  • 3 ton (6,000 lb) listed capacity
  • 3-15/16 to 18-5/16 in. lift range
  • Aluminum and steel construction
  • Foam handle bumper and side carry handles

This BIG RED jack pairs an aluminum body with steel parts and carries a 3 ton, 6,000 pound rating. The listed lift range is 3-15/16 to 18-5/16 inches, so the saddle starts under 4 inches and slides beneath a Camry, Corolla or Prius without scraping the lower trim. The listing describes it as lighter and easier to carry than a regular all-steel jack.

A dual-piston quick-lift pump brings the saddle up to the lift point fast, and a built-in overload system stops the jack being used past its capacity. The foam bumper on the handle keeps it from marking paint when you lean it against a door, and side handles help when you lift it into a trunk or onto a shelf. The listing includes a limited 1 year warranty from the maker.

With an 18-5/16 inch top, it reaches comfortably on Toyota cars and works on many crossovers, but a Tundra or a lifted truck will outgrow it. It makes a sensible second jack beside a taller truck jack, or a main one for a car-only household. Lift at the manual’s points and transfer the load onto stands before working.

View BIG RED 3 Ton Aluminum Jack on Amazon

6. YELLOW JACKET 3 Ton Full Aluminum Floor Jack: 3.75 to 18.9 in. Dual Pump Lift

YELLOW JACKET 3 Ton Aluminum Jack product photo
Key features
  • 3 ton (6,600 lb) listed capacity
  • 3.75 to 18.9 in. lift range
  • All-aluminum frame
  • Two swivel rear casters and two front rollers

YELLOW JACKET uses an all-aluminum frame on this 3 ton jack and lists it at 6,600 pounds of capacity. The range runs from 3.75 to 18.9 inches, which places it between a sedan-height jack and a crossover jack. The listing states it has been tested for safety and meets the ASME standard.

An all-aluminum frame is the point of this jack: it is meant to be picked up and moved, not just rolled. That helps if you work in a driveway, keep the jack in a shed or take it to a family member’s house for a tire swap. A dual-piston pump lifts quicker than a single pump, and a load-limiting system activates if the jack is overloaded.

Two swivel rear casters and two front rollers make it easy to steer under a RAV4 or Corolla, and a large rubber saddle protects the jack point. At 18.9 inches it is not tall enough for most frame trucks with any lift, so Tacoma and Tundra owners should look higher on this list. For a car or crossover owner who wants a jack that is easy to lift into a trunk, it is a reasonable fit.

View YELLOW JACKET 3 Ton Aluminum Jack on Amazon

Matching Each Jack to a Toyota Model

Here are the six jacks set against the Toyota each one suits most naturally.

JackListed capacityListed lift rangeNatural Toyota match
VEVOR 3 Ton3 ton (6,600 lb)3.35 to 19.69 in.RAV4 and Highlander in one garage
BIG RED 3 Ton Aluminum3 ton (6,000 lb)3-15/16 to 18-5/16 in.Camry, Corolla, Prius
YELLOW JACKET Aluminum3 ton (6,600 lb)3.75 to 18.9 in.Cars and crossovers, carried by hand
AUTOWN 3 Ton3 ton (6,600 lb)7.1 to 20.9 in.Stock Tundra, Sequoia, 4Runner
Road DAWG Aluminum Big Wheel3 ton (6,000 lb)5.98 to 20.87 in., 8.98 to 23.86 in. with adapterTacoma on gravel or grass
GAOLLY Big Wheel3 ton (6,600 lb)5.9 to 28.9 in.Lifted Tacoma and 4Runner
Figures as stated on each Amazon listing. Confirm the jack point height on your own vehicle, since lifts, leveling kits and tire sizes change it.
aerial view of a well-lit urban area at night

With a sedan and a truck at home, the best floor jack for Toyota owners may really be two jacks. The VEVOR covers the most ground alone, while a lifted truck calls for a dedicated tall jack.

Jacking a Toyota Safely Through a Grand Rapids Year

The jack raises the vehicle and stands hold it. Seals can bleed down slowly, so set rated stands before any part of you goes underneath.

  1. Park on level concrete, set the parking brake and chock the wheels staying down.
  2. Center the saddle on the jack point your manual shows.
  3. Pump until the tire clears, then place a stand at the nearest support point and lower the vehicle onto it slowly.
  4. Leave the jack snug as a backup and push the vehicle firmly to check it sits steady.
rustic industrial workshop filled with vintage machinery and tools

West Michigan weather adds a few wrinkles. Slush and road salt dripping off a Tacoma make a garage floor slick, so dry the spot before the jack rolls in. Salt also eats at frame rails, so skip any lift point with flaking scale.

Seasonal tire swaps are the usual reason to jack a Toyota at home. Torque the lug nuts to the manual’s figure, and our guide to choosing a torque wrench for lug nuts covers the tool. With a wheel off, check the pads too, and our brake pad guide for Toyota models shows what to compare.

Jobs to Hand Over to a Shop Lift

Some work needs the whole truck up and level, and exhaust, fuel line and frame rust checks on a Tundra or 4Runner go safer on a two-post lift. If you find a torn boot, a wet shock or a noisy hub while the vehicle is up, our Toyota wheel bearing guide covers the warning signs.

dynamic cityscape of Sydney at night

When the next service interval in your manual arrives, our factory scheduled maintenance in Grand Rapids handles those inspections with your Toyota on a lift.

Frequently Asked Questions

What is the best floor jack for Toyota trucks like the Tundra?

A 3 ton jack with a top height above 20 inches suits a stock Tundra, such as the AUTOWN at 7.1 to 20.9 inches. Capacity is rarely the issue, because the jack lifts only one end of the truck at a time.

How high does a jack need to go for a lifted Tacoma or 4Runner?

Measure from the floor to your frame or axle point and add the inches needed for the tire to clear. On many lifted trucks that lands above what a standard jack offers, which is why a tall jack like the GAOLLY at 28.9 inches makes sense.

Where do I put a floor jack on a RAV4?

Use the lift points shown in your RAV4 owner’s manual, which are reinforced areas built to take the load. Put a rubber pad on the saddle if you lift at the pinch weld, and support the vehicle on stands before working.

Rather keep the truck off your garage floor altogether? Ring 456 AutoFix on 616-279-3832 any weekday from 8am to 5pm, or request a time through our contact page.

Our after-hours drop-off means you can leave your Toyota at 456 Carrier St NE, Grand Rapids, on your way home and let us take it from there.