456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

F-150 or Mustang? The Best Muffler for EcoBoost Engines, Compared

best muffler for ecoboost: welder in protective gear working on large refrigeration pipes indoors

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A stock EcoBoost is quiet by design, and plenty of owners would like to hear a little more from it. The best muffler for EcoBoost engines usually comes inside a bolt-on cat-back system made for one truck or car, so the real job is matching the kit to your year, cab and bed, then picking a tone you can live with on the highway.

This guide covers the F-150 with the 3.5L or 2.7L EcoBoost and the Mustang with the 2.3L, since that is where most direct-fit kits are made. For muffler types and sizing on other vehicles, read our aftermarket muffler buying guide first.

Quick answer

Which muffler suits an EcoBoost F-150 or Mustang?

Buy a cat-back made for your generation. On a 2015-2020 F-150, the Flowmaster FlowFX 717785 adds a moderate to aggressive note. On 2021 and newer trucks, the MagnaFlow 19562 Street Series bolts on with its own hardware. Mustang 2.3L owners can choose the Borla ATAK 140585, which carries a no-drone guarantee.

Our Quick Picks

Three quick picks for the most common EcoBoost vehicles. All six kits are reviewed below.

Flowmaster FlowFX 717785 product photo
2015-2020 F-150

Flowmaster FlowFX 717785

Dual 2.5 in · 409 stainless

A straight-through Flowmaster with a moderate to aggressive note.

SuitsThirteenth-generation F-150 EcoBoost trucks
View on Amazon →
MagnaFlow 19562 Street Series product photo
2021+ F-150

MagnaFlow 19562 Street Series

Dual split rear · stainless

MagnaFlow's resonant Street Series tone with included hardware.

SuitsFourteenth-generation F-150 EcoBoost trucks
View on Amazon →
Borla ATAK 140585 product photo
Mustang 2.3L

Borla ATAK 140585

ATAK · T-304 stainless

Borla's aggressive ATAK line, sold with a no-drone guarantee.

Suits2015-2023 Mustang EcoBoost owners
View on Amazon →

Why a Turbo Engine Changes the Muffler Choice

On an EcoBoost, the exhaust passes through one or two turbochargers before it reaches the pipes under the truck. The turbine takes energy out of each pulse, so the sound that reaches the muffler is already softer than it would be on a V8. That is why a cat-back on a 3.5L V6 or a 2.3L four-cylinder rarely gets as loud as the same kit on a 5.0L.

So a free-flowing muffler is easier to live with on a turbo engine. The bigger risk is drone, a low boom in the cab at steady highway speed, which some kits handle better than others.

A cat-back starts behind the catalytic converters, so the emissions hardware stays in place, and none of the picks below calls for a tune.

Matching the Kit to Your Year, Cab and Bed

EcoBoost exhaust kits are split by generation, and the F-150 is split again by cab and bed length because the pipe has to reach the rear axle. Check these points against the Amazon listing before you order:

  • Model year: F-150 kits come in 2011-2014, 2015-2020 and 2021 and newer versions. Mustang 2.3L kits are usually listed for 2015-2023, and the 2024 car has its own parts.
  • Engine: many F-150 kits cover the 2.7L, 3.5L and 5.0L together, while older kits are 3.5L only.
  • Cab and bed: a crew cab with a 5.5 foot bed and an extended cab with a 6.5 foot bed often share a kit, while long beds may need an extension pipe.
  • Exit style: side exit or dual split rear changes what hitch and bumper parts the pipe must clear.

Ford also uses EcoBoost engines in the Explorer, Ranger, Bronco and Escape, but direct-fit cat-backs for those are fewer. Confirm year, model and engine on Amazon for any kit before you buy, since one listing never covers every version.

Best Muffler for EcoBoost Trucks and Mustangs: Six Kits Reviewed

Four of these cat-backs fit the F-150 across three generations, and two fit the 2015-2023 Mustang 2.3L. Each one names its vehicles on the listing, and the sound notes come from the makers.

1. Flowmaster FlowFX 717785: Dual 2.5 Inch 409 Stainless Cat-Back for 2015-2020 F-150 2.7L and 3.5L

Flowmaster FlowFX 717785 product photo
Key features
  • Fits 2015-2020 F-150 2.7L, 3.5L and 5.0L, except standard cab short bed
  • Dual 2.5 in mandrel-bent 409 stainless tubing
  • FlowFX straight-through muffler
  • 4 in black ceramic stainless tips, factory hangers

The Flowmaster 717785 is a FlowFX cat-back kit listed for the 2015-2020 F-150 with the 2.7L or 3.5L EcoBoost, as well as the 5.0L V8. The listing excludes the standard cab short bed, so check your truck’s cab and bed before ordering. It runs dual 2.5 inch pipes and finishes with 4 inch black ceramic coated stainless tips.

Unlike the chambered mufflers Flowmaster is best known for, the FlowFX muffler in this kit is a straight-through design. Flowmaster describes the sound as moderate to aggressive and says the system is dyno tuned. On a turbo V6, that usually means a fuller note at idle and more voice under load, without the sharp edge a chambered muffler can bring to a V8.

The tubing is mandrel-bent stainless steel, and the listing says the whole system is stainless, which helps on a truck that sees salted roads. It uses the factory hanger locations, so it can go in without drilling, and Flowmaster backs it with a lifetime limited warranty. It is not the pick for someone who wants the quietest possible upgrade, and owners of other F-150 generations need a different part number.

View Flowmaster FlowFX 717785 on Amazon

2. MagnaFlow 19562 Street Series: Stainless Dual Split Rear Cat-Back for 2021-2026 F-150 2.7L and 3.5L

MagnaFlow 19562 Street Series product photo
Key features
  • Fits 2021-2026 F-150 2.7L, 3.5L and 5.0L
  • Dual split rear exit layout
  • Stainless steel, made in the USA
  • Direct-fit with all hardware included

MagnaFlow’s 19562 is a Street Series cat-back for the 2021-2026 F-150 with the 2.7L or 3.5L EcoBoost, and the listing also covers the 5.0L. It uses a dual split rear exit, with one tip at each side of the rear bumper. That gives a newer truck a symmetrical look that differs from the factory single side exit on many trims.

MagnaFlow says the Street Series is engineered for the resonant, throaty sound the brand is known for, and that kit 19562 was tuned for its interior and exterior sound levels. The company also describes extensive dyno testing aimed at improving exhaust flow. For an EcoBoost owner, the Street Series is generally the middle of MagnaFlow’s range, louder than stock without the racing feel of its Competition line.

The system is built from corrosion-resistant stainless steel using CNC robotic manufacturing and is made in the USA. MagnaFlow used 3D scanning during development for OEM-like fit, and the box includes all hardware for a do-it-yourself install. A limited lifetime construction warranty applies. Confirm that your cab, bed and hitch setup suit a split rear exit, and check whether your truck is a PowerBoost hybrid, since the listing names only the 2.7L, 3.5L and 5.0L.

View MagnaFlow 19562 Street Series on Amazon

quiet highway stretches towards green mountains under an overcast sky

3. Borla 140466: T-304 Stainless Cat-Back for 2011-2014 F-150 3.5L EcoBoost

Borla 140466 product photo
Key features
  • Fits 2011-2014 F-150 3.5L EcoBoost, automatic
  • Crew cab 5 ft 7 in bed or extended cab 6 ft 7 in bed, 144.5 in wheelbase
  • T-304 stainless, all-welded
  • Bolt-on install, made in the USA

The Borla 140466 is a cat-back system listed for the 2011-2014 F-150 with the 3.5L EcoBoost V6 and an automatic transmission. Fitment is narrow on purpose: the title names two and four wheel drive crew cabs with the 5 foot 7 inch short bed and extended cabs with the 6 foot 7 inch standard bed, both on the 144.5 inch wheelbase. Owners of other cab and bed combinations should look elsewhere.

Borla builds the system from T-304 stainless steel with all-welded construction, which is the most rust-resistant material on this list. That matters on a truck that may already have a decade of Michigan winters behind it. The listing describes the tone as the classic Borla sound, and it is a bolt-on install made in the USA.

This is the kit for owners who bought one of the first EcoBoost trucks and want to keep it for years. It replaces a factory system that may be rusting at the hangers or muffler seams on an older truck. Because the truck is older, expect the factory bolts at the converter flange to fight back. Penetrating oil or a shop with a torch makes the job far easier.

View Borla 140466 on Amazon

4. Flowmaster Outlaw 818168: 3 Inch Cat-Back with Super 10 Muffler for 2021-2025 F-150 EcoBoost

Flowmaster Outlaw 818168 product photo
Key features
  • Fits 2021-2025 F-150 2.7L, 3.5L, 5.0L and PowerBoost
  • 3 in inlet, dual 2.5 in outlets, 409 stainless
  • Super 10 series muffler
  • Dual 4.5 in black ceramic coated tips

The Flowmaster 818168 belongs to the Outlaw series, the loud end of Flowmaster’s range. The listing names the 2021-2025 F-150 with the 2.7L or 3.5L EcoBoost, the 5.0L and the PowerBoost hybrid, and it also refers to the factory dual layout. Check how your truck’s exhaust left the factory and confirm fit on the listing before you buy.

At its core is a Super 10 series muffler, which Flowmaster says gives a deep, powerful sound. The system starts with a 3 inch, 16-gauge mandrel-bent stainless pipe and splits into dual 2.5 inch outlets with 4.5 inch black ceramic coated tips. Flowmaster lists gains of up to 18 horsepower and 15 lb-ft at the rear wheels over stock, measured on its own testing.

The tubing is 409 stainless for long-term corrosion resistance, and the kit uses the factory hanger locations with all hardware included. Flowmaster also notes that it clears the factory spare tire without the flattened section of the stock tailpipe. Drivers who spend hours at highway speed, tow often or want a quiet cab should look at the MagnaFlow or Borla options instead, since this kit is built for sound first.

View Flowmaster Outlaw 818168 on Amazon

two workers operate machinery in an indoor factory setting surrounded by materials

5. Borla ATAK 140585: T-304 Stainless Dual Split Rear Cat-Back for 2015-2023 Mustang 2.3L EcoBoost

Borla ATAK 140585 product photo
Key features
  • Fits 2015-2023 Mustang 4-cylinder (2.3L EcoBoost)
  • ATAK sound with a no-drone guarantee
  • Dual split rear exit, 4 in round chrome tips
  • T-304 stainless, all-welded, bolt-on

Borla’s 140585 is a cat-back system for the 2015-2023 Mustang with the four-cylinder engine, which is the 2.3L EcoBoost. It carries what Borla calls its ATAK sound, the sound level the company offers for owners who want a bold note, and exits through a dual split rear layout with a single 4 inch round chrome tip on each side. The 2024 Mustang uses separate Borla part numbers.

The headline feature is Borla’s no-drone guarantee, listed on this kit. Drone at highway speed is the most common complaint about louder exhausts on four-cylinder cars, so a written maker promise on that point is genuinely useful for anyone who commutes in the car. The four-cylinder has a different character from a V8, and ATAK is intended to give it a sportier voice.

Construction is T-304 stainless steel with all-welded joints, built in the USA, which suits a car that might be driven through a Grand Rapids winter. The kit is a bolt-on install. It is a poor match for someone who wants only a slight change from stock, and buyers should confirm the model year and body style on the listing before ordering.

View Borla ATAK 140585 on Amazon

6. MagnaFlow 19097 Street Series: Dual Split Rear Cat-Back for 2015-2023 Mustang 2.3L EcoBoost

MagnaFlow 19097 Street Series product photo
Key features
  • Fits 2015-2023 Mustang 2.3L
  • Street Series sound level
  • Dual split rear exit
  • Made in the USA

The MagnaFlow 19097 is a Street Series cat-back for the 2015-2023 Mustang with the 2.3L EcoBoost. Like the Borla above, it exits through a dual split rear layout, so the rear of the car gets a tip at each corner. The listing is specific to the 2.3L, and the V8 and V6 cars of the same years use other part numbers.

Street Series is MagnaFlow’s everyday sound level. The company describes the series as engineered for a resonant, throaty tone, and it sits below the louder Competition Series that MagnaFlow also sells for this car. For a Mustang that does daily commuting, that is a reasonable middle ground between the quiet stock system and a more aggressive kit.

The kit is made in the USA, and MagnaFlow’s Street Series systems are direct-fit designs built to bolt into the factory mounting points. The Amazon listing for this part number carries fewer details than the newer MagnaFlow listings, so read the fitment notes and the product images carefully before you buy. If you want the loudest Mustang option, the Borla ATAK is the better match.

View MagnaFlow 19097 Street Series on Amazon

How the Six Cat-Backs Compare

Narrow the list by vehicle first, then by material and tone. Sound labels come from each maker’s listing.

KitListed fitmentMaterialSound, as listed
Borla 1404662011-2014 F-150 3.5L EcoBoostT-304 stainlessClassic Borla sound
Flowmaster FlowFX 7177852015-2020 F-150 2.7L, 3.5L, 5.0L409 stainlessModerate to aggressive
MagnaFlow 195622021-2026 F-150 2.7L, 3.5L, 5.0LStainlessResonant, throaty
Flowmaster Outlaw 8181682021-2025 F-150 2.7L, 3.5L, 5.0L409 stainlessDeep, powerful
Borla ATAK 1405852015-2023 Mustang 2.3LT-304 stainlessATAK, no-drone guarantee
MagnaFlow 190972015-2023 Mustang 2.3LStainlessStreet Series tone
EcoBoost cat-back picks by listed fitment, material and maker-stated sound

If you mostly tow or commute, lean toward a kit sold on low drone, and save the louder Flowmaster Outlaw for a truck that is mostly for fun. When choosing the best muffler for EcoBoost daily drivers, the material line matters too.

stunning sunset illuminates an empty racetrack with bleachers

Michigan Muffler Law and Winter Salt

Michigan sets a clear baseline for any exhaust change. The text of MCL 257.707 says a motor vehicle “shall at all times be equipped with a muffler in good working order and in constant operation to prevent excessive or unusual noise and annoying smoke.” It also says a person shall not “remove, destroy, or damage any of the baffles contained in the muffler.” Exhaust leaks are a safety matter too, since the Car Care Council notes that carbon monoxide is odorless, colorless and lethal.

The same section requires “a properly operating exhaust system which shall include a tailpipe and resonator on a vehicle where the original design included a tailpipe and resonator.” Every kit here includes a muffler. We don’t recommend straight pipes, muffler deletes, cutouts or removing any emissions part on a vehicle that is driven on public roads.

close-up of a modern digital sound interface screen displaying tuning

Grand Rapids winters are the other test. Brine and slush coat the pipes for months, and short trips leave water sitting inside a muffler case. T-304 stainless resists rust best, while 409 stainless holds up well but can turn a dull brown, so check the label if your truck sees every salted road in the county.

On an older truck, plan for seized bolts at the converter flanges. Our guide to the best rust remover for exhaust parts covers penetrants for tired hardware.

Installing a Cat-Back and When a Shop Helps

aerial photograph of a go-kart track surrounded by green landscape during sunset

These kits bolt to the factory flange behind the converters and hang from the factory hanger points, so a driveway install is possible with jack stands and patience. The tricky part is lining up clamps so nothing touches the frame or spare tire.

Listen for ticking at a joint or smell exhaust in the cab after an install, since both point to a leak. Our page on exhaust leak symptoms explains what to look for. A patch from our exhaust repair kit roundup can cover a small hole for a while, but it is not a fix for a leaking flange on a new system.

Our exhaust repair in Grand Rapids covers mufflers, pipes, hangers and clamps on foreign and domestic vehicles. Bring the truck and the kit you bought, and we can fit it.

Frequently Asked Questions

Will a cat-back make my EcoBoost loud?

Louder than stock, but usually not V8 loud. The turbos soften the exhaust before it reaches the muffler, so most EcoBoost cat-backs give a deeper note at idle and a stronger sound under throttle. Pick by the maker’s sound label if you want to stay on the mild side.

What is the best muffler for EcoBoost F-150 trucks with a long bed?

Start with the cab and bed length, not the brand. Many kits only cover the crew cab short bed and the extended cab standard bed, and long beds often need an extension pipe sold separately, so confirm the exact configuration on Amazon before you order.

Is it legal to change the muffler on my truck in Michigan?

Replacing a muffler with a working aftermarket one is normal. Michigan’s MCL 257.707 requires a muffler in good working order and bans removing its baffles, so a muffler delete or straight pipe is the wrong choice for a street vehicle.

Picked out a kit and want it under the truck without the rusty-bolt fight? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request an exhaust appointment on our contact page.

Busy during shop hours? Bring the truck by after we close and use the after-hours drop-off at our 456 Carrier St NE shop in Grand Rapids, and we will take it from there.