As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Both of these tools plug into the same port under your dash and talk to the same phone in your pocket, yet they are built for very different owners. The bluedriver vs obdlink mx+ choice comes down to one question: do you want an app that explains the problem to you, or an adapter that lets you pick the software and dig as deep as you like?
This page compares the two makers on their app approach, cost after purchase, vehicle networks, third-party support and warranty terms as each one states them. Then it reviews the BlueDriver Pro and the OBDLink MX+ side by side, with the Vgate vLinker MC+ added as a third option for open-adapter shoppers. For handhelds and bidirectional tools as well, our guide to OBD2 scanners for home mechanics covers the wider field.
Quick answer
Should you buy the BlueDriver Pro or the OBDLink MX+?
Pick BlueDriver if you want plain-English repair reports and ABS, airbag and TPMS codes in one app with no subscription. Pick the OBDLink MX+ if you want to run FORScan, BimmerCode or other third-party apps, reach Ford MS-CAN and GM SW-CAN modules, or use a Windows laptop. Both work with iPhone and Android.
Our Quick Picks
One Bluetooth scan tool from each maker, plus the Vgate vLinker MC+ as a close rival to the MX+. All three run from your phone and get a full review below.

BlueDriver Pro
A guided, all-in-one app with fix reports built in.

OBDLink MX+
An open adapter that runs its own app or dozens of others.

Vgate vLinker MC+
A compact third-party adapter with Ford and GM network access.
Closed App or Open Adapter: How the Two Makers Think
BlueDriver sells a complete package. The sensor, the app and the repair database are designed together, and the app is the only way you use the hardware. That keeps setup simple: plug in, pair, scan and read a report that says what the code means and what usually fixes it.
OBDLink, made by OBD Solutions, comes at it from the hardware side. The MX+ is an interface between the car and whatever software you choose, whether that is the free OBDLink app, a Windows program or one of the dozens of third-party apps the maker says support it. You get more freedom, and you also take on more of the work of reading the data and deciding what it means.
Neither approach is better in general. A driver who wants to know why the check engine light came on before calling a shop will feel at home with BlueDriver. An owner who logs fuel trims on a weekend, or wants to change a setting with a coding app, will find the BlueDriver walls in the way sooner or later.
BlueDriver vs OBDLink MX+ at a Glance
Every line below comes from the three Amazon US listings or the makers’ own pages. Where a maker doesn’t say something, the table says so instead of guessing.
| Point | BlueDriver Pro | OBDLink MX+ | Vgate vLinker MC+ |
|---|---|---|---|
| Devices | iPhone and Android phones or tablets | iPhone, Android and Windows | iOS, Android and Windows |
| Apps | BlueDriver app only | OBDLink app plus third-party apps such as FORScan, Torque, BimmerCode and Carista | Third-party apps that use ELM327, ELM329 or STN commands |
| Cost after purchase | No subscription; all features and app updates included | OEM data add-ons free with MX+; third-party apps priced by their own developers | Not stated; app costs set by each developer |
| Systems beyond the engine | Enhanced ABS, SRS, TPMS and transmission codes | Enhanced OEM data for listed makes, including ABS, SRS and TPMS parameters | Depends on the app you pair it with |
| Repair guidance | Unlimited VIN-matched repair reports | Not offered; you research codes yourself | Not mentioned in the listing |
| Ford and GM networks | Not stated | MS-CAN and SW-CAN supported | MS-CAN and SW-CAN supported |
| Vehicle coverage | Gas vehicles 1996 and newer sold in North America | 1996 and newer cars and light trucks sold in the U.S. | Five standard OBD2 protocols; confirm your app with Vgate |
| Warranty | Not stated in the listing | 3 years, plus 180-day money-back guarantee | Not stated in the listing |
The table shows the core split. BlueDriver puts its effort into explaining codes, and OBDLink puts its effort into reaching more modules and more software.
BlueDriver vs OBDLink MX+: The Three Adapters in Detail
The BlueDriver and OBDLink units already appear in our other scanner guides, and they return here because this matchup is about those exact tools. The Vgate rounds out the list for buyers who like the open-adapter idea but would rather try another maker. Check the vehicle list on each listing before you order, since enhanced coverage changes by make and year.
BlueDriver Pro: Bluetooth OBD2 Scan Tool with Repair Reports and ABS, SRS, TPMS Codes

- Bluetooth sensor with iPhone and Android app
- Enhanced codes: check engine, ABS, SRS, TPMS, transmission
- Unlimited VIN-matched repair reports
- One-time purchase, no subscription, 24/7 support
BlueDriver Pro pairs a compact Bluetooth sensor with the BlueDriver app for iPhone and Android. The sensor stays plugged into the OBD II port, and the phone does all of the reading and explaining. This exact model also appears in our OBD2 scanner guide for DIY mechanics, and it returns here as the BlueDriver side of this comparison. The listing describes a one-time purchase that unlocks every feature, with no subscription, no add-ons, no account and free app updates.
Code coverage goes past the engine computer. The listing names enhanced reading and clearing for check engine, ABS, SRS airbag, TPMS and transmission faults, plus live data while you drive, freeze frame, smog readiness and Mode 6 results. Its signature feature is the repair report: an unlimited, VIN-matched write-up with the code definition, likely causes and fixes that technicians have confirmed.
BlueDriver lists compatibility with gas vehicles from 1996 on sold new in the U.S., Canada and Mexico, and its online checker shows which systems and service tasks your exact car supports. Support is listed around the clock by phone or in-app chat. The sensor is built for BlueDriver’s own app rather than third-party software such as FORScan or Torque, so it does not suit an owner who wants to code modules or log data elsewhere.

OBDLink MX+: Bluetooth OBD2 Adapter for iPhone, Android and Windows with MS-CAN and SW-CAN

- Works with iPhone, Android and Windows
- Free OEM data add-ons in the OBDLink app
- Supports FORScan, BimmerCode, Torque and more
- Ford MS-CAN and GM SW-CAN networks
OBDLink MX+ is a Bluetooth adapter from OBD Solutions that turns an iPhone, Android device or Windows PC into a scan tool. We also covered it in our guide to Bluetooth OBD2 scanners for iPhone. Like BlueDriver, it puts the screen on your phone. The OBDLink app is included, and the maker says the MX+ gets its OEM-specific data add-ons free, while owners of other OBDLink adapters buy them in-app.
The bigger difference is openness. The listing recommends the MX+ for FORScan, Torque, BimmerCode, DashCommand, AlfaOBD and Carista, and OBDLink says dozens of third-party apps support it. Enhanced OEM support is listed for Ford, GM, Mazda, Nissan and Infiniti, Toyota, Lexus and Scion, Honda, Hyundai and Kia, with extra live parameters such as ABS, SRS and TPMS data. OBDLink also states support for every legislated OBD-II protocol plus the MS-CAN and SW-CAN networks on many Ford and GM vehicles.
Over-voltage protection, a low power battery saver mode and free firmware updates are part of the package, and OBDLink states a 3-year warranty with a 180-day money-back guarantee. There are no technician fix reports, so you research a code yourself or inside whichever app you choose. OBDLink advises checking its troubleshooting guide to confirm your vehicle and the features you need before ordering.

Vgate vLinker MC+: Bluetooth OBD2 Scan Tool with Ford MS-CAN, GM SW-CAN and Low-Power Sleep

- Pairs with iOS, Android and Windows
- Ford MS-CAN and GM SW-CAN plus 5 OBD2 protocols
- ELM327, ELM329 and STN command sets
- 24 mA running, 3 mA in sleep mode
The Vgate vLinker MC+ is the third adapter here, and it comes from neither BlueDriver nor OBDLink. It earns a place because it sits in the same class as the MX+: a small Bluetooth plug that hands your car’s data to an app of your choosing on iOS, Android or Windows. Vgate says the plus version adds iPhone and iPad support that the plain vLinker MC lacks, so check the full name before you order.
Network reach is the main reason it belongs in this comparison. The listing states support for GM SW-CAN and Ford MS-CAN alongside all five standard OBD2 protocols, and it describes the adapter as compatible with ELM327, ELM329 and STN command sets. That wide command support is what lets many third-party diagnostic and coding apps talk to it, and Vgate pitches the MC+ for coding jobs that move a lot of data.
For drivers who leave a dongle in the port, Vgate lists a 24 mA operating current and a 3 mA idle draw in its intelligent sleep mode. The listing does not mention repair reports or a fix database, so reading the codes stays with you and your app. Vgate asks buyers to confirm on its website that their chosen app works with the adapter, and firmware upgrades go through its Vgatemall support team.
View Vgate vLinker MC+ on Amazon
Where They Differ Once You Use Them
Repair reports versus raw data
A trouble code tells you which test the computer failed, not which part to buy. BlueDriver’s report bridges that gap with likely causes and fixes reported for your VIN, which helps a newer DIYer avoid replacing parts at random. The MX+ shows the same code, its freeze frame and plenty of live data, but the reasoning is up to you.
That matters most on vague codes. An evap leak or a lean condition can come from several places, and a list of common fixes is a sensible starting point rather than a final answer. If your car feels normal and the light is still on, our article on a check engine light that stays on while the car runs fine explains what to check first.
Third-party apps and coding
This is where the MX+ pulls away for enthusiasts. FORScan is a popular Windows and mobile program for Ford, Lincoln and Mazda owners, and BimmerCode and Carista let BMW and other owners change some comfort settings. The MX+ listing names all three, along with Torque, DashCommand and AlfaOBD.
BlueDriver doesn’t list any third-party app support, so you stay inside its own software. Keep in mind that coding apps change how modules behave, and a bad change or a dying battery mid-session can cause trouble. Read each app’s own vehicle list and instructions before you write anything to a module.

Ford and GM network access
Many Ford and GM vehicles put some modules on secondary networks that a basic adapter can’t see. OBDLink states on its MX+ product page that the adapter supports every legislated OBD-II protocol plus Ford MS-CAN and GM SW-CAN. That is a big reason Ford owners pair it with FORScan, and our Ford scan tool guide goes further into that setup.
BlueDriver lists strong support for GM and Ford among many makes but doesn’t name those networks. Which systems it reads on your car is shown by its vehicle compatibility checker, which asks for the year, make, model and the country where the car was first sold.
Leaving it plugged in
OBDLink lists automatic sleep and wake-up and a low power battery saver mode, which is meant to limit drain if the adapter stays in the port. BlueDriver doesn’t publish a sleep current in its listing. Vgate quotes a 3 mA sleep draw for the vLinker MC+. If you park for days at a time, unplug whichever adapter you own when it sits unused, and always pull it before long storage.
Which One Fits Which Driver
Match the tool to how you plan to use it rather than to a brand name.
| Your situation | Better fit | Why |
|---|---|---|
| First scanner, want to know what a code means | BlueDriver Pro | Repair reports explain causes and fixes |
| ABS, airbag or TPMS light on | Either, check coverage | Both list enhanced data for these systems on supported cars |
| Ford or Mazda owner who wants FORScan | OBDLink MX+ | Listed for FORScan, with MS-CAN support |
| BMW owner curious about coding | OBDLink MX+ | Listed for BimmerCode and Carista |
| Windows laptop in the garage | OBDLink MX+ | BlueDriver lists phones and tablets only |
| Want 24/7 help from a person | BlueDriver Pro | Listing states round-the-clock phone and chat support |
| Want Ford and GM network access from a maker other than OBDLink | Vgate vLinker MC+ | Listing names MS-CAN, SW-CAN and STN command support |
Plenty of owners run both over time. A BlueDriver often comes first for quick answers, and an MX+ follows once the hobby grows into logging or coding. If warning lights beyond the engine are your main worry, our ABS and airbag code scanner guide shows which tools reach those modules.
Scanning Through a West Michigan Winter
Cold mornings in Grand Rapids bring out weak batteries, slow-to-warm sensors and TPMS lights after a temperature drop. A phone scanner is handy here because you can check a code from the driver’s seat instead of standing in the slush with a handheld. Let the engine warm up before judging live data such as coolant temperature or fuel trims, since cold readings look different.

Low voltage can also set odd codes in several modules at once. If a cold snap leaves you with a cluster of communication faults, charge or test the battery before chasing each one. Phones also lose charge quickly in the cold, so keep yours warm if you plan a long diagnostic session.
When a Scan Isn’t Enough
None of the three is sold as a bidirectional scan tool, so don’t expect any of them to switch components on and off to prove a fault the way a shop tool can. A flashing check engine light usually means an active misfire that can damage the catalytic converter, and our page on a flashing check engine light explains why you should ease off and get it looked at soon. Audi owners can match what they read against our list of common Audi fault codes.

When a code keeps coming back after the usual fix, the next step is testing rather than more parts. Our technicians handle check engine light diagnostics in Grand Rapids for foreign and domestic vehicles, and bringing the codes your scanner found gives us a head start.
More Buying Guides
Frequently Asked Questions
Is BlueDriver or OBDLink MX+ easier for a beginner?
BlueDriver is the easier start for most beginners. Its app reads the code, explains it and lists likely fixes for your VIN. The OBDLink MX+ gives you more data and more app choices, but you have to interpret more of it yourself.
Do either of these need a subscription?
The BlueDriver listing says one purchase unlocks every feature, with no subscription. OBDLink says its own app and OEM data add-ons are free with the MX+. Third-party apps you run on the MX+, such as coding apps, may charge their own fees.
Which is better for a Ford or GM vehicle?
For deep access, the MX+ has the edge on paper because OBDLink states support for Ford MS-CAN and GM SW-CAN networks and FORScan. BlueDriver lists strong Ford and GM support for codes and reports. Check each maker’s coverage for your exact model year.
Do all three work with an iPhone?
Yes. Each of the three lists iPhone and Android support. The MX+ and the vLinker MC+ also list Windows, which matters if you want to run FORScan or other PC software from a laptop.
Got a code that keeps returning no matter which app reads it? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a diagnostic visit through our contact page.
Working through the day? Our after-hours drop-off means the car can come to us on your schedule, at 456 Carrier St NE, Grand Rapids, in the Creston neighborhood.
