As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Most Subaru muffler shopping starts one of two ways: a Forester or Outback that suddenly sounds like a tractor, or a WRX owner who wants more voice from the boxer. The best muffler for Subaru drivers in the first group is a direct-fit replacement that sounds like the factory part, while the second group needs a bolt-on axle-back or cat-back that adds tone without a highway drone.
Below we explain the three muffler types and how to match one to your car, then review six model-specific listings. If you drive something other than a Subaru, our broader guide to the best aftermarket muffler covers universal and big-brand options.
Quick answer
Which muffler should I buy for my Subaru?
For a rusted or rattling factory muffler, a stainless direct-fit part such as the Walker Quiet-Flow SS listed for your model restores stock sound. For more tone, the Borla 11843 axle-back suits 2.0L Imprezas and Crosstreks, and the Invidia Q300 cat-back suits 2015-on WRX sedans. Confirm year, model and engine first.
Our Quick Picks
Three quick picks for the Subaru muffler jobs that come up most: a worn-out Forester muffler, a sportier Crosstrek or Impreza, and a WRX sedan. All six are reviewed below.

Walker Quiet-Flow SS 21904
A bolt-on stainless muffler that aims to match the factory Forester sound.

Borla 11843
A bolt-on axle-back that adds Borla's tone to a 2.0L Impreza or Crosstrek.

Invidia Q300 HS15STIG3S
A full cat-back for the WRX sedan with a flat-bottom muffler and quad tips.
Factory Replacement, Axle-Back or Cat-Back?
A direct-fit replacement muffler copies the original part. It bolts to the same flange, hangs from the same rubber isolators and aims for the same sound, which is what most Forester, Legacy and Crosstrek owners want after the old can rots out.
An axle-back swaps only the muffler section behind the rear axle. On a Subaru that usually means new mufflers and tips at the bumper, a deeper note at idle and part throttle, and a quick bolt-on job. A cat-back replaces everything from the converter outlet rearward, including the mid-pipe and often the resonator, so it changes sound and flow more than an axle-back does.
One point surprises many WRX owners. Much of the classic Subaru burble came from unequal-length headers on older turbo engines, not from the muffler. Many newer Subaru engines use equal-length headers, so a cat-back makes them sound deeper, but no muffler alone brings back that older off-beat rumble.
Matching a Muffler to Your Subaru
Subaru shares engines across models but not exhaust layouts, so a part number that fits one Impreza may miss the next. Note these details before you open a listing:
- Model and body style: sedans and 5-door hatchbacks often take different rear sections, even in the same year.
- Engine: a 2.0L, a 2.5L and a turbo engine in the same model line can each use their own muffler.
- Generation: listings that say “2015-up” were written for one body, and a later redesign may not fit.
- Amazon’s fit check: enter year, make, model, engine and trim, and read any qualifier notes before ordering.
Check what the muffler bolts to as well. If that pipe, flange or hanger has rusted thin, even the best muffler for Subaru models will not seal or hang straight.
Best Muffler for Subaru: Six Picks by Model
The first three picks are stock-style replacements for everyday Subarus, and the last three are sportier bolt-on systems. Each listing names specific models, and none fits every Subaru, so confirm year, model and engine on Amazon before buying.
1. Walker Quiet-Flow SS 21904: Stainless Direct-Fit Muffler for 2014-2018 Forester

- Listed for 2014-2018 Subaru Forester
- 100% stainless steel with internal drainage
- OE-style hangers, brackets and pipe routing
- 2.75 in outlet, louvered tubes for OE-style sound
Walker’s Quiet-Flow SS 21904 is a direct-fit replacement muffler whose listing names the 2014 through 2018 Subaru Forester. It is meant to swap straight in for the factory part, with OE-style hangers, brackets and pipe routing, so a healthy exhaust needs no cutting or welding to install it.
The Quiet-Flow SS line is built entirely from stainless steel, which Walker says gives longer life than aluminized mufflers, and an internal drainage system helps clear the condensation that rusts mufflers from the inside. Louvered tubes and domed heads are there to keep the sound close to stock, and the internal partitions and mechanically joined tubes are designed to flex with heat cycles instead of cracking. Walker backs the line with a limited lifetime warranty and a 90-day Safe and Sound Guarantee.
This is a practical choice for a commuter Forester whose original muffler has rotted through or started to rattle. It will not make the car louder or sportier, which is the point for most owners. Forester engines and trims changed over these years, so enter yours in Amazon’s fit tool and read the qualifier notes before ordering.
View Walker Quiet-Flow SS 21904 on Amazon
2. Walker Quiet-Flow SS 21965: Stainless Direct-Fit Muffler for Crosstrek and Impreza

- Listed for 2013-2016 Crosstrek and 2012-2015 Impreza
- Stainless steel body with drainage system
- Bolt-on fit with OE-style hangers
- 1.75 in outlet, domed heads to cut radiated noise
The Walker Quiet-Flow SS 21965 is a stainless direct-fit muffler for the compact Subarus. Its listing names the 2013 to 2015 XV Crosstrek, the 2016 Crosstrek and the 2012 to 2015 Impreza, with further years on the full fitment list.
Like the rest of Walker’s Quiet-Flow SS range, it uses all-stainless construction and an internal drainage system, which matters on a small-engine car that spends the winter on short trips and rarely gets the exhaust hot enough to dry out. OE-style louvered tubes and domed heads aim for factory sound, so the car should drive the way it did when new. The listing calls it a direct-fit bolt-on with factory-style hangers, brackets and routing, with a 1.75 inch outlet. Coverage includes Walker’s limited lifetime warranty.
Pick this one if your Crosstrek or Impreza has a rusted, leaking or rattling rear muffler and you want a quiet, lasting fix rather than a new sound. Sedans and hatchbacks can differ, and the listing tells buyers to check year, make, model, engine and trim, so run Amazon’s fit check before you buy. It is not a performance part.
View Walker Quiet-Flow SS 21965 on Amazon

3. Walker Quiet-Flow SS 21743: Stainless Direct-Fit Muffler for 2010-2019 Legacy 2.5L

- Listed for 2010-2019 Subaru Legacy 2.5L
- All-stainless shell with internal drainage
- OE-style hangers and brackets for bolt-on fit
- 2.75 in outlet with OE-style acoustic design
Walker’s Quiet-Flow SS 21743 covers a long run of the Subaru Legacy sedan. The listing names the 2010 through 2019 Legacy with the 2.5L engine, which spans two body generations of a car that many drivers keep well past the warranty.
Construction follows the Quiet-Flow SS formula: a full stainless steel muffler with an internal drainage system, louvered tubes and domed heads tuned for factory-style sound, and spun-locked heads with OE-style spot welds for strength. Walker describes the line as acoustic and flow tested, and the direct-fit design reuses the factory hanger and bracket layout, so a sound exhaust needs no fabrication. The outlet is 2.75 inches. Walker includes its limited lifetime warranty and the 90-day Safe and Sound Guarantee with the line.
This muffler suits a high-mileage Legacy that has started to sound rough or smell of exhaust at the rear because the old muffler has rusted open. It is a replacement part, not an upgrade, and it keeps the car as quiet as it left the factory. The listing is for the 2.5L only, so owners of six-cylinder or turbo Legacy models should look elsewhere, and everyone should confirm trim on Amazon’s fit tool.
View Walker Quiet-Flow SS 21743 on Amazon
4. Borla 11843: T-304 Stainless Axle-Back for 2013-2016 Impreza and XV Crosstrek 2.0L

- Listed for 2013-2016 Impreza and 2013-2017 XV Crosstrek 2.0L
- T-304 stainless steel, all-welded
- Bolt-on axle-back installation
- Made in the USA, classic Borla sound
The Borla 11843 is an axle-back system for the 2.0L compact Subarus. Its listing names the 2013 to 2016 Impreza and the 2013 to 2017 XV Crosstrek with the 2.0L four-cylinder, all-wheel drive and the 5-door body, with either automatic or manual transmission.
Borla builds it from T-304 stainless steel with all-welded construction, and the company makes it in the USA. As an axle-back it replaces only the rear section, so it bolts on behind the axle without touching the converter or the forward pipes, which keeps the job simple for a home garage with good access. Borla describes the result as its classic sound, a deeper note than the factory muffler. Stainless at this grade also holds up well against the salt spray that eats plain steel mufflers on Michigan roads.
This pick suits a Crosstrek or Impreza hatchback owner who wants more character from the boxer without the cost and complexity of a full cat-back. It does not fit the sedan, later redesigned models or the turbo WRX, and the listing is specific about years. Confirm body style, engine and drivetrain on Amazon before ordering, and expect more sound than stock.

5. MagnaFlow 19362: Competition Series Quad-Exit Axle-Back for Select WRX, STI and Impreza

- Competition Series axle-back, quad split rear exit
- Listed for select WRX, WRX STI and Impreza
- 3D-scanned fit, hardware included
- Limited lifetime construction warranty
MagnaFlow’s 19362 is a Competition Series axle-back with a quad split rear exit, listed for select Subaru WRX, WRX STI and Impreza models. The listing does not give model years in its main details, so the fit check is the only reliable way to know whether it suits your car.
The listing describes a racing-inspired sound and a lightweight design that the company says it has dyno tested for improved exhaust flow. MagnaFlow uses 3D scanning during development to get OEM-like fitment, and the kit includes the hardware needed for a do-it-yourself install. Because it is an axle-back, the job is limited to the rear section behind the axle. MagnaFlow covers the construction with a limited lifetime warranty.
This is for a WRX owner who wants an obvious change in volume and is comfortable with a louder car every day. Drivers with long highway commutes, close neighbors or a preference for a calm cabin should look at the Invidia Q300 or a stock-style muffler instead. Enter year, model, engine and trim on Amazon and read the qualifier notes, because the listing says only select models fit.
View MagnaFlow 19362 on Amazon
6. Invidia Q300 HS15STIG3S: 3 in Stainless Cat-Back with Quad Rolled Tips for WRX and STI

- Listed for 2015-up WRX and STI 4-door
- 76 mm (3 in) SUS304 stainless piping
- Robot TIG welds and CNC-machined flanges
- 110 mm rolled stainless double-wall quad tips
The Invidia Q300 HS15STIG3S is a cat-back exhaust for the Subaru WRX and WRX STI 4-door sedan. The listing says it fits 2015-up cars, and because Subaru redesigned the WRX later, check that the fit tool confirms your exact year before you buy.
Piping is 76 mm, or 3 inches, in SUS304 stainless steel, joined with robot TIG welds and CNC-machined flanges. The flat-bottom muffler shape is designed to sit cleanly under the car at speed, and Invidia says the system gives horsepower and torque gains with a rich, deep, sporty sound. It finishes in four 110 mm rolled stainless tips with double-wall construction. As a cat-back, it replaces everything from the converter outlet to the bumper, so expect a longer install than an axle-back.
This system suits a WRX or STI owner who wants a fuller sound and a cleaner look at the rear without going to the loudest options on the market. It is not made for the hatchback, the base Impreza or older WRX bodies. Check that your car’s tune and warranty plans allow for exhaust changes, and confirm year, model and trim on Amazon.
View Invidia Q300 HS15STIG3S on Amazon
Subaru Muffler Lookup Table
Years and models come from each Amazon listing. Use the table to narrow the field, then let the fit tool make the final call.
| Subaru | Years or engine listed | Muffler | Sound goal |
|---|---|---|---|
| Forester | 2014-2018 | Walker Quiet-Flow SS 21904 | OE-style sound |
| Crosstrek and Impreza | 2013-2016 Crosstrek, 2012-2015 Impreza | Walker Quiet-Flow SS 21965 | OE-style sound |
| Legacy | 2010-2019, 2.5L | Walker Quiet-Flow SS 21743 | OE-style sound |
| Impreza and XV Crosstrek 5-door | 2013-2016 Impreza, 2013-2017 XV Crosstrek, 2.0L | Borla 11843 axle-back | Classic Borla sound |
| WRX, WRX STI, Impreza | Select models, check fit tool | MagnaFlow 19362 axle-back | Racing-inspired |
| WRX and STI sedan | 2015-up per listing | Invidia Q300 cat-back | Rich, deep, sporty |
Outback owners: makers list direct-fit Outback mufflers by generation and engine, so search with your exact year and engine and skip any seller claiming one part fits every Outback.

Sound descriptions here are the makers’ own words, not measurements. Loudness also depends on the rest of your exhaust, the engine and how the car is driven, and local noise rules apply to whatever you install. If you live close to neighbors or commute long distances on the highway, a stock-style option is the safer choice.
Road Salt, Short Trips and Subaru Exhausts in West Michigan
Mufflers usually die from the inside out. Every cold start makes water vapor that condenses in the muffler, and short winter trips around Grand Rapids never get the exhaust hot enough to boil it off, so the shell rusts from within while salt spray attacks the outside.
That is why the best muffler for Subaru owners in West Michigan is usually a stainless one. Stainless steel resists both kinds of rust far longer than plain aluminized steel, and drain features help clear trapped water. Five of the six listings below state stainless construction outright, and the MagnaFlow listing does not name its material.

Expect a fight with the old fasteners. Flange bolts and hanger brackets on a salted Subaru often seize, and soaking them days ahead helps, as our guide to the best rust remover for exhaust work explains. A small pinhole away from any joint can sometimes be patched for a while with a product from our best exhaust repair kit roundup, but a muffler with a rotted seam needs replacing.
When the Swap Belongs in a Shop
A direct-fit muffler on a clean, rust-free car is a reasonable driveway job with ramps or jack stands. It stops being simple when bolts snap, the pipe ahead crumbles or a hanger has torn loose, and then picking the best muffler for Subaru repairs matters less than fixing what holds it.

Leaks deserve fast attention. The Car Care Council’s car care guide warns that exhaust carbon monoxide is odorless, colorless and lethal, and advises having any suspected leak checked at once. Our exhaust repair in Grand Rapids covers mufflers, pipes, hangers and leak checks on foreign and domestic vehicles, Subarus included.
More Buying Guides
Frequently Asked Questions
Will an aftermarket muffler make my WRX drone on the highway?
It can. Louder axle-backs and straight-through designs are more likely to drone at cruising speed. If you drive long highway stretches, a stock-style muffler is the calmest route, and among the sporty picks the Invidia Q300 is pitched at a deep tone rather than raw volume.
Is an axle-back or a cat-back better for a Subaru?
An axle-back changes the rear mufflers and tips, so it costs less effort and mostly changes sound. A cat-back also replaces the pipes ahead of the mufflers, which changes sound and flow more. Pick by how much change you want and what your listing fits.
Why does my Subaru exhaust rattle?
The usual causes are a loose or rusted heat shield, a broken hanger, or baffles that have come loose inside the muffler. A shield or hanger is a small fix, while an internal rattle means the muffler needs replacing.
Can one muffler fit every Subaru model?
No. Subaru exhausts differ by model, body style, engine and generation, so each listing names the cars it fits. Enter your year, model, engine and trim in Amazon’s fit tool before you buy.
Rusted bolts, a rattle you can’t find or an exhaust smell in the cabin? Phone 456 AutoFix on 616-279-3832 from 8am to 5pm Monday through Friday, or book a Subaru exhaust check on our contact page.
Short on daytime hours? Leave your Subaru with our after-hours drop-off at 456 Carrier St NE in the Creston area of Grand Rapids.
