As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A worn hub on a Ford usually announces itself as a low drone on the highway that gets louder when you change lanes. Picking the best wheel bearing brand for Ford trucks and SUVs comes down to two choices: Motorcraft, which is Ford’s own parts line, or an aftermarket maker that lists the exact Ford number its hub replaces.
Below, we explain how Ford wheel ends differ and give one listing per brand for the F-150, Super Duty, Explorer, Escape and Fusion. If you are still deciding whether the noise really is a bearing, our article on how long wheel bearings last before they wear out covers the warning signs.
Quick answer
Which wheel bearing brand should a Ford owner buy?
Motorcraft is the factory match if you order by the Ford part number. Timken and SKF are bearing makers that list the Ford numbers they replace, MOOG names your truck or SUV right on the listing, and Detroit Axle or A-Premium suit tighter budgets. Whatever the brand, confirm year, drivetrain and corner on Amazon first.
Our Quick Picks
Three picks that cover the main ways Ford owners shop: the factory Motorcraft number, a MOOG hub that names the F-150, and a value pair for the rear of an AWD Escape.

Motorcraft HUB-87
The Ford-branded hub for owners who already know their Motorcraft number.

MOOG 515143
A MOOG hub whose listing names the 2011-2014 half-ton trucks.

Detroit Axle rear hub pair
Two rear hubs for the AWD Escape in one order.
Why Ford Hubs Vary So Much by Model
Ford sells everything from compact crossovers to heavy pickups, and the wheel ends change with the vehicle. On most late-model Fords the bearing comes as a sealed hub assembly that bolts to the knuckle, with the flange and studs built in. A small change in drivetrain or position can mean a different part number.
- F-150 and Expedition: front hubs differ between 2WD and 4WD, because a 4WD hub has a splined center for the front axle shaft. The rear of an F-150 rides on axle shaft bearings inside the axle housing, which is a separate job.
- Super Duty: F-250 and F-350 4×4 front hubs are large, heavy units, and single and dual rear wheel trucks can use different hubs.
- Explorer, Escape and Fusion: compact bolt-on hubs, with different numbers for front, rear, FWD and AWD. Match the ABS setup on your old hub too.
- Older Escape fronts: on the 2001-2012 Escape, the front bearing presses into the knuckle, which is why many listings for it sell a knuckle with the hub already fitted.
Motorcraft or Aftermarket: How the Brands Compare
Motorcraft is the parts line sold through Ford dealers. On Amazon, Motorcraft listings usually show a part number and little else, so get that number from the old hub, a dealer catalog or a cross-reference before you order.
Timken and SKF started as bearing manufacturers and list the Ford and Motorcraft numbers their hubs replace. SKF explains its wheel-end range on its SKF vehicle aftermarket wheel end page. MOOG, part of DRiV, prints the vehicle list right on the listing, while Detroit Axle and A-Premium are value brands that often sell hubs in pairs. For a wider look at these makers across all vehicles, see our guide to the best wheel hub assembly brands.
Best Wheel Bearing Brand for Ford: One Listing per Brand
Each brand below is paired with a Ford listing it actually names or cross-references. Fitment depends on year, drivetrain, wheel count and corner, so run your Ford through Amazon’s fit checker before you buy, and never assume one hub covers every version of a model.
1. Motorcraft HUB-87: Genuine Ford Wheel Hub Assembly by Part Number

- Ford's own Motorcraft parts line
- Part number HUB-87
- Country of origin listed as United States
- Order by number; listing names no vehicles
Motorcraft HUB-87 is a wheel hub assembly from Ford’s own parts brand, the same line a Ford dealer parts counter sells. The Amazon listing is short: it gives the part number HUB-87, the package size and weight, and a country of origin of United States. It does not print a vehicle list, so this is a hub you order by its number.
That number is easy to place, because aftermarket listings cross-reference it. MOOG’s 512460 listing says it replaces HUB-87 and Ford BB5Z-1104-A and names the 2011 to 2019 Explorer and the 2013 to 2019 Police Interceptor Utility. Other 512460 listings place that hub at the front and rear of 2011 and 2012 Explorers and at the rear of later models, so the corner matters as much as the year.
This pick suits Explorer owners who want the factory part and have confirmed HUB-87 from the old hub, a Ford parts catalog or their VIN. It is not the right choice if you only know your model year, since the listing offers no fitment help. Before you buy, check the number against your Explorer’s year, drivetrain and position, and confirm fit in Amazon’s fit checker.
View Motorcraft HUB-87 on Amazon
2. MOOG 515143: Front Wheel Bearing and Hub Assembly for 2011-2014 F-150

- Lists 2011-2014 Ford F-150
- Also 2011-2014 Expedition and Navigator
- Sealed bearing with quad lip seal
- Wheel studs fitted, rust-resistant hub
MOOG 515143 is a wheel bearing and hub assembly, and its Amazon listing names the 2011 to 2014 Ford F-150 along with the 2011 to 2014 Expedition and Lincoln Navigator. Those three share a platform up front, which is why one MOOG number covers all of them. MOOG is a chassis parts brand owned by DRiV.
The listing describes a sealed bearing designed for quiet running, a quad lip seal to keep out moisture and grit, a rust-resistant hub and wheel studs already installed. Because the unit arrives assembled, you bolt it to the knuckle with no pressing or bearing packing. The plain fitment line on the listing is useful when you want to check a model year at a glance.
This hub suits owners of a 2011 to 2014 F-150 with a drone from one front corner that changes when the truck leans in a curve. The title does not say 2WD or 4WD, and those trucks use different front hubs, so enter your drivetrain in Amazon’s fit checker and compare the center of your old hub before you order. It is not a part for the rear axle, and it does not cover newer or older F-150 generations, so confirm year, model and engine first.

3. Timken 515020: Axle Bearing and Hub Assembly for F-250, F-350 and Excursion

- Lists 1999-2004 F-250 and F-350
- Also 2000-2005 Ford Excursion
- Replaces F81Z1104BG and SKF BR930420
- Bearing maker's hub assembly
Timken 515020 is an axle bearing and hub assembly whose Amazon listing names the 1999 to 2004 Ford F-250 and F-350 and the 2000 to 2005 Excursion. The title also lists the numbers it replaces, including Ford F81Z1104BG and F81Z1104BH and SKF BR930420. SKF’s own BR930420 listing describes that part as a 4×4 front hub for single rear wheel trucks.
Timken has been making tapered and ball bearings for well over a century, and it supplies hubs to the aftermarket under its own name. Its listing for this unit is light on detail, describing a tight fit and reliable service, so the replacement numbers are the most useful facts on the page. Matching one of those numbers to your old hub is the surest way to know you have the right part.
This hub suits owners of early Super Duty trucks and Excursions who want a bearing maker’s part for a heavy front end that sees plows, trailers or rough roads. Early Super Duty trucks were built in several configurations, so drivetrain and wheel count matter here. Confirm your year, model, drivetrain and engine in Amazon’s fit checker and compare the stamped number on the old hub before you buy.
4. SKF BR930963: Front 4×4 Wheel Hub and Bearing for 2017-2020 F-250 and F-350 SRW

- Front position, 4×4
- Lists 2017-2020 F-250 and F-350 SRW
- Spindle knuckle flange design
- Listed weight 25.2 pounds
SKF BR930963 is a front wheel hub and bearing assembly, and its Amazon title names 4×4 versions of the 2017 to 2020 Ford F-250 and F-350 Super Duty with single rear wheels. That SRW detail matters, because dual rear wheel trucks can use a different hub. The listing gives a weight of about 25 pounds, which tells you how large these Super Duty units are.
SKF is a Swedish bearing company with a long history in industrial and automotive bearings. Its vehicle aftermarket line covers hub units, bearings and seals, and the company describes them on its own wheel-end pages. This listing calls out a spindle knuckle flange design, and like most SKF hubs it is meant to bolt straight in as a complete unit with the bearing preset and sealed.
This hub suits owners of a newer Super Duty 4×4 with a front corner that rumbles at speed or shows play when you rock the tire. Given the weight, plan on help or a jack to hold it during the swap, and follow the torque figures in Ford’s service manual. It does not fit 2WD trucks or the dual rear wheel models, so confirm your year, model, drivetrain and engine in Amazon’s fit checker before ordering.

5. Detroit Axle Rear Wheel Bearing Hubs: Pair for 2013-2019 Ford Escape AWD

- Rear left and right, sold as a pair
- Lists 2013-2019 Escape AWD
- 5 lugs, ABS, 4-bolt square flange
- 10-year warranty as listed
This Detroit Axle kit includes two rear wheel bearing and hub assemblies, and the listing names the 2013 to 2019 Ford Escape with AWD along with AWD versions of the 2015 to 2019 Lincoln MKC. The specification line lists the rear left and right positions, five lugs, ABS, a four-bolt square flange and an AWD drive type. FWD Escapes use a different rear hub, so this kit is only for all-wheel-drive models.
Detroit Axle is a value brand that sells many of its hubs in pairs. The listing says its hubs go through impact, wear and fatigue testing, and it states a 10-year warranty. Buying a pair lets you replace both rear corners at once, which some owners prefer when the vehicle has high mileage and both sides have seen the same salt and miles.
This kit suits Escape AWD owners with a hum from the back of the car that grows with speed and who want to fix both sides in one visit. It is not for the front of the Escape or for FWD versions, and it does not cover the 2001 to 2012 Escape. Confirm your year, model, drivetrain and engine in Amazon’s fit checker, and check the old hubs for an ABS setup that matches.
View Detroit Axle rear hub pair on Amazon
6. A-Premium Front Wheel Bearing and Hub Assembly: 5-Lug for 2013-2020 Ford Fusion

- Front left or right, 5 lugs
- Lists 2013-2020 Fusion, 2013-2016 MKZ
- Speed sensor not included
- References 512498 and HA590481
A-Premium’s front wheel bearing and hub assembly lists the 2013 to 2020 Ford Fusion and the 2013 to 2016 Lincoln MKZ, plus the 2019 and 2020 Police Responder Hybrid and SSV Plug-In Hybrid. The fitment line also names some rear AWD positions and notes engine limits for 2017 to 2019 front applications, which is a good reason to read it closely before ordering.
The listing gives a clear specification: front left or right position, no speed sensor included, five lugs, a four-hole flange, a splined center that takes the CV axle directly and a pre-greased bearing. It references Ford DG9Z1104E and DG9Z1104B along with the aftermarket numbers HA590481 and 512498, so you can check it against your old hub. A-Premium states a one-year unlimited-mileage guarantee on this part.
This hub suits Fusion owners with a growl from one front corner who want a budget part with plain specs. Because the sensor is not part of the hub, move your existing ABS sensor over or replace it if it is damaged. It is not for the 2006 to 2012 Fusion, which uses a different front design. Confirm your year, model, drivetrain and engine in Amazon’s fit checker before you buy.
View A-Premium Fusion front hub on Amazon
Matching a Brand to Your F-150, Super Duty or SUV
Use this table to narrow down the best wheel bearing brand for Ford models in your driveway, then check the exact listing against your vehicle.
| Listing | Brand type | Ford models and position named | Good fit for |
|---|---|---|---|
| Motorcraft HUB-87 | Ford’s own parts line | Part number only; cross-referenced to 2011-2019 Explorer | Owners who want the factory number |
| MOOG 515143 | Chassis parts brand | 2011-2014 F-150, Expedition, Navigator | Half-ton owners who want fitment printed |
| Timken 515020 | Bearing maker | 1999-2004 F-250 and F-350, 2000-2005 Excursion | Older Super Duty trucks |
| SKF BR930963 | Bearing maker | Front, 4×4, 2017-2020 F-250 and F-350 SRW | Newer Super Duty 4×4 trucks |
| Detroit Axle rear pair | Value brand | Rear, 2013-2019 Escape AWD | Doing both rear corners at once |
| A-Premium front hub | Value brand | Front, 2013-2020 Fusion | Fusion owners on a budget |

Brine, Frost Heaves and Ford Wheel Ends in West Michigan
Grand Rapids winters put Ford hubs through months of salt spray and slush. Once water works past a seal, the grease thins out, rust starts on the races and the hum builds over a few weeks. Spring potholes then add sharp hits that can mark a race in one blow.
Salt also seizes hubs into knuckles and snaps bolts, so plan on penetrating oil and time. If a hard pothole hit started the noise, our list of signs of pothole damage shows what else to look over.

Worn tires and loose steering parts can mimic a bearing, so read our rundown of wheel bearing noise symptoms before you buy parts.
Doing the Swap Yourself or Handing It Off
A hub holds the wheel on the truck, so treat it as a safety repair. Support the vehicle on stands, follow the Ford service manual and torque the hub bolts and axle nut to the figures it gives. Many Ford axle nuts should be replaced rather than reused, and a clean knuckle face helps the new hub sit square.

Pressed bearings, like the front of an older Escape, need a proper set of adapters, and our guide to the best wheel bearing press kit explains what to look for. If the hub is welded in place by rust or you would rather not fight it, our wheel bearing replacement in Grand Rapids covers foreign and domestic vehicles, Fords included. If steering parts come apart along the way, have the alignment checked afterward, and our suspension repair service can inspect the rest.
More Buying Guides
Frequently Asked Questions
Is Motorcraft better than Timken or MOOG on a Ford?
Motorcraft is the factory part, but Timken, SKF and MOOG list the Ford numbers their hubs replace. A hub with the correct number for your year, drivetrain and corner matters more than whose name is on the box.
Does a 4WD F-150 use the same front hub as a 2WD?
No. A 4WD front hub has a splined center for the front axle shaft, and a 2WD hub does not, so the part numbers differ. Check your drivetrain in Amazon’s fit checker before you order.
Should I replace Ford wheel bearings in pairs?
Only the worn corner has to be replaced. Many owners still do both sides on high-mileage trucks because the other side has seen the same miles and salt, and some value listings come as pairs.
How can I tell which Ford hub number I need?
Look for a number stamped on the old hub, ask a Ford parts counter with your VIN or enter your year, model, drivetrain and engine in Amazon’s fit checker. Cross-reference lists on aftermarket listings help match a Motorcraft number.
Is your F-150 or Explorer droning louder every week? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a hub inspection through our contact page.
Tied up until after five? Bring the Ford to 456 Carrier St NE once the day is done and use our after-hours drop-off, adding a quick note about the speed where the drone starts.
