As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Most Dodge exhaust questions start with a V6 Charger or Challenger that sounds a little flat next to its Hemi siblings. The best muffler for Dodge cars and SUVs is usually a complete cat-back kit made for your exact year and body, because the factory system ties the mufflers, pipes and rear valance together.
This guide sorts the common Dodge layouts, explains how makers describe tone and drone, and reviews six kits that name their fit. For muffler styles in general, our guide to aftermarket mufflers covers chambered, turbo and straight-through designs.
Quick answer
Which exhaust suits a V6 Dodge?
Match the kit to the year and body. A 2015-2023 Charger V6 takes kits like the MagnaFlow 19225 or Borla 140686, a 2015-2023 Challenger V6 takes the Borla 140649, and a 2011-2013 Charger V6 fits the Pypes SMC26S. Durango owners can look at the MagnaFlow 15068 for the 3.6L and 5.7L.
Our Quick Picks
Three quick picks for the most common Dodge V6 and SUV layouts. All six kits are reviewed below.

MagnaFlow 19225 Street Series
A moderate Street Series kit aimed at daily drivers.

Borla 140649
A bolt-on Borla for SXT and GT coupes.

MagnaFlow 15068 Street Series
A moderate cat-back for the three-row SUV.
Start With the Year, Trim and Body
Dodge used the same engines across several bodies, so the engine alone does not pick the exhaust. The fueleconomy.gov listing for the 2019 Charger shows a 3.6L six-cylinder in rear-wheel and all-wheel drive, plus 5.7L, 6.4L and supercharged 6.2L V8 versions. Each of those needs its own pipe routing and part number.
- 2011-2014 Charger V6: the first years of the current body, with kits that differ from later cars. Some listings only cover 2011-2013.
- 2015-2023 Charger V6: the facelifted car, often sharing kits with the Chrysler 300 V6.
- 2015-2023 Challenger V6: SXT and GT coupes, rear or all-wheel drive, with their own two-door routing.
- Durango: the three-row SUV, where some kits cover both the 3.6L and the 5.7L Hemi.
Note your trim and the shape of your factory tips as well. Several kits reuse the stock tips and rear valance, while others bring their own, and some kits exclude GT models with round factory tips.
Tone Labels and Drone on a V6
Every maker has its own sound scale, so compare words rather than numbers. MagnaFlow’s Street Series is pitched as a moderate, throaty tone, Borla’s ATAK is its more aggressive line, and Pypes uses chambered Street-Pro mufflers that it says add a chambered sound at idle and cruising. None of the listings here give decibel figures.
Drone is a low hum that builds inside the cabin at steady highway speed. It tends to show up on louder systems, and the 3.6L can also sound raspy when a kit opens it up too far. If you drive the highway every day, a moderate kit is easier to live with than the loudest label on the list.
Best Muffler for Dodge Cars and SUVs: Six Kits Reviewed
Each kit below names the Dodge models it is listed for. Confirm your year, model, trim, drivetrain and engine on Amazon before you buy, because no single listing covers every Dodge.
1. MagnaFlow 19225 Street Series: Stainless Cat-Back for 2015-2023 Charger 3.6L

- Fits 2015-2023 Dodge Charger 3.6L and Chrysler 300 3.6L
- Dual split rear exit
- Stainless steel, robotic CNC construction
- Direct fit with installation hardware included
The MagnaFlow 19225 is a Street Series cat-back listed for the 2015-2023 Dodge Charger with the 3.6L V6, and it also covers the Chrysler 300 with the same engine. It replaces the factory system from the converter back and exits on both sides of the rear bumper. MagnaFlow describes the sound as the resonant, throaty tone the brand is known for.
The kit is built from stainless steel using robotic CNC manufacturing, which matters on a car that sees salted roads every winter. MagnaFlow says it used 3D scanning to match the factory mounting points, and the box includes the hardware needed for a do-it-yourself install. The maker also states that the system was dyno tested to improve exhaust flow, without listing a figure in the listing.
This is the kit to look at first if your Charger is a daily driver and you want more sound outside without a loud cabin on the highway. It does not suit the 2011-2014 car, the Hemi trims or the Challenger, which all use different routing. Confirm the year, engine and drivetrain on Amazon before buying, since Charger V6 kits are split by generation.
View MagnaFlow 19225 Street Series on Amazon
2. Borla 140686 ATAK: T-304 Stainless Cat-Back for 2015-2023 Charger V6

- Fits 2015-2023 Dodge Charger V6 and Chrysler 300 V6
- T-304 stainless steel, all welded
- ATAK sound, dual split rear exit
- Reuses factory tips, bolt-on install
The Borla 140686 is a cat-back system listed for the 2015-2023 Dodge Charger V6 and the Chrysler 300 V6. It uses Borla’s ATAK mufflers, which the company positions as its most aggressive sound level. The system splits to a single 2.25 inch exit on each side and reuses the factory tips, so the rear of the car keeps its stock look.
Construction is T-304 stainless steel with all-welded joints, and the kit bolts on in place of the factory pipes. Borla states it is made in the USA and lists a no drone guarantee on this system, which speaks to the main worry with a louder V6 exhaust. Stainless steel of this grade also resists the brine and slush that collect under a Michigan car through the winter.
This kit suits an owner who wants a clear step up in sound over the MagnaFlow and accepts more volume at full throttle. It is not meant for someone who wants a quiet commute or for any Challenger, Durango or Hemi model. Check your Charger’s year, trim and tip style against the listing, and remember the kit depends on factory tips being in good condition.
View Borla 140686 ATAK on Amazon

3. Pypes SMC26S: Cat-Back with Street-Pro Mufflers for 2011-2013 Charger V6

- Fits 2011-2013 Dodge Charger SE and SXT V6
- Street-Pro chambered mufflers
- Fits the factory bumper tip bezels
- Tubing, mufflers, clamps and hardware included
The Pypes SMC26S is a cat-back system made for the 2011-2013 Dodge Charger SE and SXT with the V6. That narrow window matters, because the earliest cars on this body use different exhaust parts from the 2015 and later Charger. The kit is designed to fit the factory bumper exhaust tip bezels, so the rear fascia does not need cutting.
Everything needed comes in the box, including the tubing, mufflers, clamps and mounting hardware. Pypes fits its Street-Pro mufflers, which the company says add a chambered sound at idle and while cruising but avoid getting obnoxious at full throttle. That makes it a different flavor from the straight-through MagnaFlow and Borla kits, with more of a classic muscle-car character.
This is a good match for an owner of an early V6 Charger who wants character on a car that may be ready for a new exhaust anyway after a decade of salt. It does not fit the 2014 Charger, the 2015-2023 car, AWD versions not named on the listing, or any Hemi model. Confirm your year, trim and engine on Amazon before you order, and inspect the converter flange for rust first.
4. Borla 140649: T-304 Stainless Cat-Back for 2015-2023 Challenger SXT and GT 3.6L

- Fits 2015-2023 Dodge Challenger SXT and GT 3.6L V6
- Automatic or manual, RWD or AWD
- T-304 stainless steel, all welded
- Reuses factory tips and valance
The Borla 140649 is a cat-back listed for the 2015-2023 Dodge Challenger SXT and GT with the 3.6L V6. It covers automatic and manual cars in both rear-wheel and all-wheel drive, which helps GT owners with the AWD system. Tips are not included, because the kit is designed to work with the factory tips and rear valance.
The system is built from T-304 stainless steel with all-welded construction and installs as a bolt-on replacement for the factory pipes. Borla describes the result as its classic Borla sound rather than naming one of its louder lines in the listing. Because it keeps the stock tips, the change is mostly heard rather than seen from behind the car.
This kit suits a Challenger V6 owner who wants a fuller tone and a stainless system that will stand up to road salt for years. It is not a fit for the Charger, which uses a separate Borla part number, or for the R/T, Scat Pack and other Hemi models. Check the year, trim, transmission and drivetrain against the listing on Amazon, and make sure your factory tips are free of heavy corrosion before reusing them.

5. MBRP Challenger 3.6L: 2.5 Inch Catback with Dual Rear Exit for 2015-2021 Models

- Listed for 2015-2021 Dodge Challenger 3.6L
- 2.5 in tubing diameter
- Dual rear exit
- Designed to minimize backpressure, easy installation
This MBRP catback is listed for the 2015-2021 Dodge Challenger with the 3.6L V6. It runs 2.5 inch tubing to a dual rear exit and replaces the factory system behind the catalytic converter. MBRP says the design is built to minimize backpressure and to be easy to install with the supplied parts.
One detail needs checking before you buy. The listing title calls this an aluminized catback, while the feature list names T-304 stainless steel, so confirm the material with the seller or on the MBRP part page. Aluminized steel costs less but rusts sooner in a salt-belt climate, while stainless lasts longer under a car driven through Grand Rapids winters.
The kit gives Challenger V6 owners a second option next to the Borla, and its model range stops at 2021, so owners of 2022 and 2023 cars should look at the Borla instead. The listing does not name a sound level, so expect to judge the tone from owner clips rather than a maker label. It does not fit the Charger or any Hemi Challenger. Confirm year, trim and drivetrain on Amazon before you order.
View MBRP Challenger 3.6L Catback on Amazon
6. MagnaFlow 15068 Street Series: Stainless Cat-Back for Durango 3.6L and 5.7L

- Listed for 2011-2026 Dodge Durango 3.6L and 5.7L
- Moderate Street Series sound
- Stainless steel, dual split rear exit
- Bolt-on, 50-state legal per the listing
The MagnaFlow 15068 is a Street Series cat-back listed for the Dodge Durango with either the 3.6L V6 or the 5.7L Hemi. The title gives a 2011-2026 range, while the feature text says it is designed for the 2011-2021 Durango, so check the latest model years carefully. It exits on both sides of the rear bumper and replaces everything behind the converter.
MagnaFlow rates this kit at a moderate sound level, meant to add power and exterior sound while keeping interior noise comfortable. It uses mandrel-bent stainless steel pipes and bolts on using factory mounting points, which MagnaFlow says it confirmed with 3D scanning. The listing also states the system is 50-state legal and designed to work with the factory engine calibration.
This is the pick for a Durango owner who carries a family or tows and wants a deeper note without making the cabin loud. It is not meant for SRT or other 6.4L and 6.2L Durangos, which have their own kits. Confirm your year, engine and drivetrain on Amazon before buying, and check the hangers and converter flange for rust, since a three-row SUV often lives with plenty of winter road salt.
View MagnaFlow 15068 Street Series on Amazon
Which Kit Fits Your Dodge?
Use the table to narrow the list, then read the fitment notes on the listing itself.
| Vehicle | Option here | Build | Tone (maker’s words) |
|---|---|---|---|
| 2015-2023 Charger 3.6L | MagnaFlow 19225 | Stainless cat-back, split rear | Resonant, throaty |
| 2015-2023 Charger V6 | Borla 140686 | T-304 cat-back, reuses OE tips | ATAK |
| 2011-2013 Charger SE or SXT V6 | Pypes SMC26S | Cat-back, Street-Pro mufflers | Chambered |
| 2015-2023 Challenger SXT or GT 3.6L | Borla 140649 | T-304 cat-back, reuses OE tips | Classic Borla sound |
| 2015-2021 Challenger 3.6L | MBRP catback | 2.5 in tubing, dual rear | Not stated |
| Durango 3.6L or 5.7L | MagnaFlow 15068 | Stainless cat-back, split rear | Moderate |

If two kits fit, pick by how the car is used. A Charger that commutes every day suits a moderate system, while a weekend Challenger can carry a louder one. The best muffler for Dodge drivers is the one that still sounds right after an hour at highway speed with the radio low.
Salt, Michigan Law and the Parts Around the Muffler
Michigan’s Vehicle Code (MCL 257.707c) says a person shall not operate a vehicle on a highway or street if the exhaust has a defect that affects sound reduction, has no muffler or other noise dissipative device, or has a cutout, bypass, amplifier or similar device. Every kit in this guide keeps a muffler behind the catalytic converter. We never recommend straight pipes, cutouts or removing emissions parts.
West Michigan winters are hard on exhaust. Brine and slush cling to the underside for months, and short trips leave water inside the muffler that rusts it from within. Stainless kits hold up better than aluminized steel, though clamps and rubber hangers still age, and our post on how long an exhaust system lasts in a salt-belt winter explains what to expect.

Look at what the new system bolts to before you order. A tailpipe that hangs low often points to a broken exhaust hanger, and a rusty flange may need a soak with an exhaust rust remover before the old pipe lets go. If the current muffler only has a small hole, a short-term exhaust repair kit can hold it until the new kit arrives.
Leaving the Install to a Shop
A bolt-on cat-back on a Charger or Challenger is a fair driveway job with jack stands and patience. The trouble usually starts at the converter flange, where salt-crusted bolts snap or round off. Lining up the tips with the rear valance also takes a second pair of hands.

Ticking from up front or an exhaust smell in the cabin can mean a leak ahead of the muffler, and our page on exhaust leak symptoms helps you sort that out first. When you would rather hand it off, our Grand Rapids exhaust repair service fits mufflers, pipes and hangers on foreign and domestic vehicles.
More Buying Guides
Frequently Asked Questions
Does a Charger exhaust fit a Challenger?
No. The two cars share engines but not bodies, so the pipe routing, hangers and rear valance differ. Borla, for example, sells the 140686 for the Charger V6 and the 140649 for the Challenger V6.
Will a cat-back make my V6 Charger drone?
It can, mostly with the louder systems at steady highway speed. Moderate kits such as MagnaFlow’s Street Series are aimed at drivers who want more sound outside without a loud cabin, and Borla lists a no drone guarantee on the 140686.
Do 2011-2014 and 2015-2023 Chargers use the same kit?
Usually not. Makers list separate part numbers for the earlier and the facelifted car, and some early kits only cover 2011-2013. Check the year range on the listing before you order.
Can I run a muffler delete on my Dodge in Michigan?
No. Michigan’s vehicle code bars driving on a street or highway without a muffler or other noise dissipative device, or with a cutout or bypass. Keep a working muffler on any street-driven car.
Picked a kit and want the best muffler for Dodge cars fitted without fighting seized flange bolts? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request an exhaust appointment through our contact page.
If your Charger or Durango is busy during business hours, use our after-hours drop-off and leave it overnight. The shop sits at 456 Carrier St NE, Grand Rapids, in the Creston neighborhood.
