As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The 5.7L Hemi has a good voice, but the factory exhaust on a Ram 1500 keeps it muted. Finding the best muffler for Ram 1500 trucks starts with one question most buyers skip: which body style is parked in your driveway? A kit made for the newer truck will not bolt onto the older one, even when both carry a 2019 or later model year.
This guide sorts six bolt-on cat-back kits by generation, sound level and exit style, then covers Michigan rules and salt. If you are weighing a single universal can instead of a full kit, our aftermarket muffler buying guide explains sizes and tone.
Quick answer
Which exhaust suits a Hemi Ram 1500?
For a 2019 or newer DT Ram with the 5.7L Hemi, MagnaFlow’s 19430 Street Series gives a moderate tone and Flowmaster’s 817843 American Thunder a deeper one. For a 2009-2018 truck, Borla’s 140307 S-Type is a stainless choice. Confirm year, cab, bed and engine on Amazon before you order.
Our Quick Picks
Three quick picks: a moderate and a deep kit for the 2019-up DT Ram, and a stainless kit for 2009-2018 trucks. All six are reviewed below.

MagnaFlow 19430 Street Series
A moderate Street Series kit that adds tone without a loud cab.

Flowmaster 817843 American Thunder
Flowmaster's deep, powerful exterior sound for the new-body Hemi.

Borla 140307 S-Type
A stainless S-Type kit with Borla's no drone guarantee.
DS, Classic or DT: Know Your Ram Before You Shop
Ram has sold two very different 1500 bodies at the same time. The DS body ran from 2009 (badged Dodge) through 2018, then stayed on sale as the Ram 1500 Classic through 2024. The DT body, the redesigned truck, arrived for 2019. Exhaust makers treat them as separate vehicles because the frame, hanger points and rear bumper differ.
So a 2020 Ram 1500 Classic takes a DS-body kit, while a 2020 Ram 1500 takes a DT-body kit, and cab and bed length change the pipe too. Ram’s own Ram 1500 model page lists the 3.0L Hurricane, the 3.6L Pentastar V6 and a newly available 5.7L Hemi V8 for 2026, so newer trucks need an engine check too.
Tone, Drone and Exit Style on a Hemi Truck
Makers grade their kits by sound. MagnaFlow calls its Street Series moderate, Borla offers Touring, S-Type and ATAK levels from mild to loud, and Flowmaster describes its American Thunder as deep and powerful. For most owners, the best muffler for Ram 1500 commuting is a moderate one, while a louder kit suits a truck driven for fun.
Drone is the steady hum in the cab at highway speed, and the Hemi’s cylinder deactivation can change it. Dual split rear exits fill the bumper cutouts on many trucks, while a side exit keeps the tips clear of a hitch.
Best Muffler for Ram 1500: Six Hemi Cat-Back Kits Up Close
Every kit below is a specific Amazon US listing that names the Ram 1500 and its engine. We split them between DT-body and DS or Classic trucks, so match your body style first and then the cab and bed.
1. MagnaFlow 19430 Street Series: Black Stainless Dual Split Rear Cat-Back for 2019-Up Ram 1500 5.7L

- Listed for the 2019-2026 Ram 1500 5.7L
- Dual split rear exit
- Black-coated stainless steel construction
- Bolt-on, moderate Street Series sound
MagnaFlow’s 19430 is a full cat-back system from its Street Series, and the Amazon title lists it for the 2019-2026 Ram 1500 with the 5.7L engine. One feature line on the same listing says it was designed for the 2019-2021 truck, so check the fitment tool with your exact year, cab and bed before ordering. It replaces everything behind the catalytic converters and exits on both sides of the rear bumper.
MagnaFlow rates the Street Series as moderate. The goal, in the maker’s words, is more power and a stronger outside sound without giving up comfortable interior noise levels. Mandrel bent pipe and a larger, straighter-through muffler cut restriction, and the listing says the system is 50-state legal and tuned around the factory calibration. The black coating sits over stainless steel, which already resists corrosion well on salted roads.
Installation is bolt-on, and MagnaFlow says it uses 3D scanning during development so the pipes line up with the original mounting points. That makes it a sensible pick for a Ram that commutes, tows or covers long highway runs. It does not fit the Ram 1500 Classic, and anyone after a loud, aggressive note will find it too restrained.
View MagnaFlow 19430 Street Series on Amazon
2. Borla 140307 S-Type: T-304 Stainless Dual Split Rear Cat-Back for 2009-2018 Ram 1500 V8

- Listed for the 2009 Dodge Ram 1500 V8 and 2010-2018 Ram 1500 V8
- T-304 stainless, all-welded construction
- Dual split rear exit, 4 inch round chrome tips
- Bolt-on, made in USA, no drone guarantee
Borla’s 140307 is a cat-back system with the S-Type sound level, and the listing names the 2009 Dodge Ram 1500 V8 and the 2010-2018 Ram 1500 V8. Those are DS-body trucks, the same platform later sold as the Ram 1500 Classic, so confirm your year, cab and bed against the listing before you buy. The system ends in a dual split rear exit with a single 4 inch round chrome tip on each side.
The pipes and muffler are T-304 stainless with all-welded construction, which matters on a truck that has already seen many Michigan winters. Borla lists the kit as bolt-on and made in the USA. S-Type sits in the middle of Borla’s range, louder than Touring and milder than ATAK, and this listing carries Borla’s no drone guarantee, aimed at the cab hum that bothers many owners at steady highway speed.
Because the factory DS exhaust is often rusted at the clamps by now, a shop can save you a fight with seized hardware. This kit suits an owner who wants a clear step up in tone that stays civil on a long drive. It is not for the 2019-up DT body, and it is listed for the V8 only, not the V6 or diesel.
View Borla 140307 S-Type on Amazon

3. Flowmaster 817843 American Thunder: Dual 3 Inch Stainless Cat-Back for 2019-2024 Ram 1500 5.7L

- Listed for the 2019-2024 Ram 1500 new body 5.7L, 2WD and 4WD
- Dual 3 inch mandrel-bent tailpipes
- 4 inch black ceramic coated tips
- Uses factory hangers and clears the spare tire
Flowmaster’s 817843 American Thunder kit is listed for the 2019-2024 Ram 1500 new body with the 5.7L engine, in both 2WD and 4WD form. The title names three wheelbases, 140.5, 144.6 and 153.5 inches, along with the 5.7 and 6.4 foot beds, which makes matching it to your truck easier than with most listings. It does not fit the Ram 1500 Classic.
The system uses dual 3 inch mandrel-bent tailpipes that finish in 4 inch black ceramic coated tips. Flowmaster lists large 4 inch 50 HD muffler internals and describes the result as a deep, powerful exterior sound, so expect a clearly louder truck than stock. Construction is stainless steel, and the kit is covered by a lifetime limited warranty according to the listing.
Flowmaster says the kit hangs from the factory hanger locations and clears the factory spare tire, so the install is a quick bolt-on job with hand tools. It suits a Hemi owner who wants the classic American V8 rumble on the street and does not mind more noise at idle and on throttle. If you tow for hours or want a quiet cab, a moderate kit such as the MagnaFlow above is the calmer option.
View Flowmaster 817843 American Thunder on Amazon
4. Flowmaster 717860 FlowFX: Dual 2.5 Inch 409 Stainless Cat-Back for 2009-2024 Classic Body Ram 1500 5.7L

- Listed for the 2009-2024 Classic body Ram 1500 5.7L Hemi
- Dual 2.5 inch 409 stainless tailpipes, 16 gauge mandrel bent
- Straight-through FlowFX muffler
- 4.5 inch black ceramic coated 304 stainless tips
Flowmaster’s 717860 FlowFX kit covers the longest span of trucks on this page. The listing names the 2009-2024 Classic body Ram 1500 with the 5.7L Hemi, which takes in the 2009 Dodge, the 2010-2018 Ram and the Ram 1500 Classic sold alongside the new truck. Cab and bed combinations still vary, so confirm the fitment notes for your truck on Amazon.
The heart of the system is a FlowFX straight-through performance muffler, which Flowmaster says gives a deep, powerful tone inside and outside the vehicle. The tailpipes are dual 2.5 inch, 16 gauge mandrel-bent 409 stainless steel, and they end in large 4.5 inch black ceramic coated 304 stainless tips. 409 stainless is a common choice for exhaust in the salt belt because it resists rust far better than plain steel.
The kit uses the factory hanger locations, clears the factory spare tire and includes the hardware needed for installation, according to the listing. It suits a DS or Classic owner who wants more sound than a moderate kit gives, and it comes with a lifetime limited warranty. Since the tone is louder in the cab as well, it is less suited to a truck that spends long days towing on the highway.
View Flowmaster 717860 FlowFX on Amazon

5. Borla 140758: T-304 Stainless Thru-Bumper Cat-Back for 2019-2024 Ram 1500 5.7L and eTorque

- Listed for 2019-2024 Ram 1500 5.7L, including eTorque, Rebel and G/T
- Quad Cab 6'4" bed, Crew Cab 5'7" and 6'4" beds, automatic
- Thru-bumper dual exit
- T-304 stainless, all welded, made in USA
Borla’s 140758 is listed for the 2019-2024 Ram 1500 with the 5.7L engine, including eTorque trucks and the Rebel and G/T packages, with an automatic transmission in 2WD or 4WD. The listing is specific about body: Quad Cab with the 6’4″ bed, and Crew Cab with either the 5’7″ or 6’4″ bed. It excludes the Ram Classic, so check all three details before ordering.
The exit runs through the bumper, which on the DT truck means the tips sit in the factory cutouts for a tidy, stock-looking finish. Construction is T-304 stainless with all-welded joints, and Borla builds it in the USA. The listing calls the sound classic Borla, and the same part number with black chrome tips, 140758BC, is sold under Borla’s Touring name, the mildest of its three sound levels.
Installation is bolt-on. This makes it a good match for an owner who wants a better note and long-lasting stainless without much extra volume inside the cab, which suits towing and commuting. Anyone after a loud truck should look at Borla’s ATAK or one of the Flowmaster kits instead, and V6 or Classic owners need a different listing.
6. Rough Country 96009: Dual 409 Stainless Cat-Back for 2009-2018 Ram 1500 4.7L and 5.7L V8

- Listed for 2009-2018 Ram 1500 V8, 4.7L and 5.7L
- Dual cat-back with rear or side exit
- 16 gauge 409 stainless, black 409 muffler
- Double-wall 304 stainless black tips, no welding
Rough Country’s 96009 is a dual cat-back system listed for the 2009-2018 Ram 1500 with either V8, the 4.7L or the 5.7L Hemi. That is the DS body, so it is not for the redesigned 2019-up truck. As with every kit here, match your cab and bed on Amazon, and treat later Ram 1500 Classic models as a separate fitment check rather than assuming they are covered.
The listing gives you a choice of rear or side exit. The tubing is 16 gauge 409 stainless steel, the muffler and clamps are black 409 stainless, and the tips are double-wall 304 stainless with a black finish. A side exit can be handy on a truck that tows often, because it keeps the tips away from the hitch and trailer tongue.
Rough Country says the kit installs into the OEM hangers with no welding, so it is designed as an at-home job, and it carries the maker’s limited lifetime replacement warranty. It suits DS owners who want a dual setup and a blacked-out look. The listing gives no sound rating, so if cab quiet matters most, the Borla S-Type with its no drone guarantee is the more predictable choice.
View Rough Country 96009 on Amazon
Ram 1500 Exhaust Kits at a Glance
| Kit | Ram as listed | Pipe and exit | Material |
|---|---|---|---|
| MagnaFlow 19430 Street Series | 2019-2026 Ram 1500 5.7L (DT) | Dual split rear | Black-coated stainless |
| Borla 140307 S-Type | 2009 Dodge Ram 1500 V8, 2010-2018 Ram 1500 V8 | Dual split rear, 4 in tips | T-304 stainless |
| Flowmaster 817843 American Thunder | 2019-2024 Ram 1500 5.7L (DT) | Dual 3 in, 4 in tips | Stainless steel |
| Flowmaster 717860 FlowFX | 2009-2024 Classic body Ram 1500 5.7L | Dual 2.5 in, 4.5 in tips | 409 stainless, 304 tips |
| Borla 140758 | 2019-2024 Ram 1500 5.7L, select cabs (DT) | Thru-bumper dual exit | T-304 stainless |
| Rough Country 96009 | 2009-2018 Ram 1500 4.7L and 5.7L V8 | Dual, rear or side exit | 409 stainless, 304 tips |
For a daily driver that tows, the best muffler for Ram 1500 use is usually a moderate one: the MagnaFlow on a DT truck or the Borla S-Type on a DS truck. Owners who want more rumble can step up to either Flowmaster. For other pickups, see our truck muffler guide for the Tundra, Tacoma, Titan and Colorado.

Michigan Exhaust Law and Road Salt
Section 257.707 of the Michigan Vehicle Code says a motor vehicle shall at all times be equipped with a muffler in good working order and in constant operation to prevent excessive or unusual noise and annoying smoke. It also says no one may remove, destroy or damage the baffles in a muffler, and it bars muffler cutouts and bypasses on motorcycles and mopeds. The same section requires a properly operating exhaust system with a tailpipe and resonator where the original design had them.
Every kit on this page keeps a real muffler in place. We do not recommend straight pipes, cutout valves or removing catalytic converters on any street truck, and a hole in a muffler is worth fixing before it becomes a ticket.

Grand Rapids roads stay brined for months, and short winter trips leave water in the muffler, so seams and clamps rust first. T-304 stainless holds up longest, 409 stainless comes next, and our article on exhaust system lifespan covers the other wear points.
When a Ram Exhaust Swap Belongs on a Lift
These kits are sold as bolt-on, but on a ten-year-old DS truck the factory clamps and hanger bolts are often fused by salt. If the old system already sags or knocks, look for a broken exhaust hanger first.

A leak ahead of the muffler can let fumes reach the cab. An exhaust repair kit for small leaks can hold a pinhole for a short while, but it is a stopgap, not a fix.
Our team handles exhaust repair in Grand Rapids on foreign and domestic trucks, from a single clamp to a full cat-back install. Bring the kit you ordered and we can check it against your Ram’s cab and bed before it goes on.
More Buying Guides
Frequently Asked Questions
Will a 2019 Ram 1500 exhaust fit a Ram 1500 Classic?
No. The Classic uses the older DS body, so it needs a kit listed for 2009-2018 or Classic trucks. Kits for the redesigned 2019-up truck usually say “Exc. Classic” in the listing.
Which kit is quietest inside the cab?
Look for the maker’s mildest sound level, such as MagnaFlow’s Street Series or Borla’s Touring line, or a kit that carries a no-drone guarantee like the Borla 140307. Deep, aggressive kits trade some cab quiet for more rumble.
Do these kits fit the 3.6L V6 or EcoDiesel Ram?
No. Every kit here is listed for the V8, and the EcoDiesel uses a DPF-back system built around its diesel particulate filter. V6 trucks need a listing that names the 3.6L.
Is a louder cat-back legal in Michigan?
The Michigan Vehicle Code requires a muffler in good working order that prevents excessive or unusual noise, and it bars removing or damaging muffler baffles. A cat-back kit that keeps a working muffler is the safe route, while straight pipes are not.
Picked a kit for your Hemi and want it hung straight, sealed tight and free of rattles? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule your Ram exhaust install online.
If the truck is busy on job sites all day, park it at 456 Carrier St NE in the evening with the after-hours drop-off and leave the keys for the morning crew.
